Slurry technology

Wienhoff 20.300 TW PROFI LINE

20,300 TW PROFI LINE
(0010) Used Wienhoff 20,300 TW PROFI LINE
(0020) Slurry tanker with interior coating and
(0030) exterior paint finish.
(0040) 6.20 m cylinder,
(0050) 6 mm wall thickness, 2.00 m tank diameter, 3
(0060) welded baffle plates inside the tank and
(0070) inspection hatch parallel to the rear
(0080) cover.
(0090) Tank with fluid displacement
(0100) for optimum drawbar load distribution.
(0110) Color: RAL 6002 (leaf green).
(0120) Simple tank filling and venting system with
(0130) galvanized pipe routed through the tank.
(0140) E-hydraulics – second tank filling and
(0150) venting at the rear for FV.
(0160) Level indicator with sight glass, 150 mm
(0170) at the front of the tank.
(0180) Float-type level indicator, front tank, for Can-Bus.
(0200) 8" suction port reduced to 6" with hydraulic
(0210) valve and quick coupler
(0220) Quick coupler with ball valve, front left.
(0230) 6" mechanical valve with quick coupler
(0240) (directly in tank for suction).
(0250) 14 ton Gigant air suspension, tandem axle,
(0260) forced steering with cable, 150 BPW axles,
Fodpsyhr Nxofx Ah Djfu
(0270) track width 2225 mm.
(0280) Low center of gravity: axles above
(0290) the springs, wheel arches over both axles.
(0300) Wienhoff "L&S" safety plus for
(0310) tandem:
(0320) - automatic adjustment of air suspension pressure
(0330) to load distribution
(0340) - Roll Stability Program (RSP)
(0350) - ABS system
(0360) - Drawbar load sensor
(0370) Wheels: 800/60 R 32 Vredestein Fl. Trac
(0380) Hydro-pneumatic sprung lower linkage
(0390) K80 with hydraulic support leg, K80 with large
(0400) flange (4 t).
(0410) 2-line air brake system with ALB
(0420) 40 km/h specification with galvanized fenders:
(0430) Galvanized fenders with round steel edge,
(0440) warning signs & marker lights
(0450) underrun protection with truck lighting
(0460) 40 km/h TÜV certificate
(0470) Additional lights on top of the tank as LED
(0480) version.
(0490) LED work lights, 2 pieces,
(0500) Positions:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x on suction arm
(0540) Active marker lights instead of standard reflectors (cat's eyes) on vehicle sides, LED.
(0560) Large stone trap box with door opening
(0570) and preparation for Vogelsang RotaCut M
(0580) 10 rotary lobe pump VX 186/390Q - L/min
(0610) Injection system with hydrostat
(0620) hydraulically regulated rotary lobe pump via RPM.
(0640) PTO shaft,
(0650) - gearbox
(0660) - hydrostatic pump
(0670) - regulated oil cooler & oil tank
(0680) Drain valves at pump suction and
(0690) pressure side.
(0700) Wienhoff fill turbine, 8 inch, type 30
(0710) for docking arm.
(0720) With valve for E-hydraulics.
(0730) Monitoring unit on pressure side
(0740) Pressure gauge on pressure side with
(0750) diaphragm gauge
(0760) Monitoring unit on suction side
(0770) Vacuum gauge on suction side
(0780) with diaphragm gauge.
(0790) With 8" inspection flap.
(0800) 2" pressure relief valve at vacuum gauge.
(0820) PRESSURE FILTER BEFORE CONTROL BLOCK!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux variant 6 / suction / docking arm
(0850) all / boom / spreading / headland / 2-axle joystick.
(0870) Auxiliary control box, suction valve
(0880) bottom left and right.
(0890) Auxiliary control box, lift control up/down
(0900) rear left.
(0920) Preparation for Wienhoff N-sensor
(0930) Hydraulic pipes instead of hoses installed to the rear,
(0940) coupling brackets mounted at rear sides.
(0960) Pressure line routed above the tank with

The listing was translated automatically. Translation errors are possible.