Open trailer

2.Achs-Tandem AH Pritsche Bordwänden & Rungen

Condition: used, maximum load weight: 18,000 kg, first registration: 07/2024, tire size: 560/60/22,5, Year of construction: 2024, Viewing by appointment only Suspension: • 1st axle: leaf-sprung • 2nd axle: leaf-sprung Braking system: • 1st axle: drum brake Pgodpfx Apsy Su Uaemsu • 2nd axle: drum brake Body configuration: • Left side: continuous • Right side: split • Rear: split • Left hydraulic flap opening Additional equipment: • Unladen weight: 4,500 kg • Discharge extension (18cm rubber lip, 22cm steel) • Roll tarp • Air and hydraulic connections for second trailer • Number of axles: 2 • Axle manufacturer: BPW • Tyres: 560/60/22.5 Internal loading dimensions approx.: • Length: 5,025 mm • Width: 2,420 mm • Height: 1,545 mm • Internal loading volume: 19.6 m³ • Loading area: 12.16 m² Prior sale, errors and typographical mistakes excepted.

Condition: used, mileage: 738,234 km, power: 324 kW (440.52 HP), first registration: 07/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Crane tractor unit SZM MAN TGX 26.440 6X2 Euro5 eev Retarder with dual-circuit hydraulics Semi-trailer Meusburger MPS-2 steered axles with crane Palfinger PK 26002-EH 4 extension, 4m 5500Kg, 12m 1750Kg radio controlled Pedpfxjnwggpj Apmogu Condition: very good Service maintained, TÜV Tires: 70-95%

Condition: new, empty load weight: 3,490 kg, maximum load weight: 14,510 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, loading space volume: 17.6 m³, tire size: 385/65 r22,5, wheelbase: 4,900 mm, color: silver, Year of construction: 2026, Equipment: ABS, center pivot plate, trailer coupling, Humbaur construction material transport trailer HD18 Rotating fifth-wheel coupling trailer Permissible total weight 18,000 kg Unladen weight only 3,490 kg SAF axles with air suspension Chassis frame hot-dip galvanized Hot-dip galvanized corner and center posts Aluminum side boards Screen-printed floor Lashing and hole outer frame with a hole spacing of only 125 mm and 57 pairs of lashing holes Pgodpfxsizhl Ae Apmou Front wall height 1200 mm, side board height 1000 mm Registration costs: 280.00 Euros Freight costs per km: 3.00 Euros

Condition: used, maximum load weight: 14,310 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, next inspection (TÜV): 01/2027, loading space length: 6,934 mm, loading space width: 2,486 mm, loading space height: 800 mm, total length: 8,750 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Wooden floor with rail system * Folding side walls * Fixed front wall * Air suspension * Storage boxes * SAF axles with drum brakes * Wabco Trailer EBS-E Pgodpfsztihujx Apmsu -----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 3,690 kg * Overall length: 8,900 * Next inspection due: 07/2026 ----Vehicle number/Vehicle: 12370----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, salvage and vehicle transport.----?YOUR VTS TEAM

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA - R 14.4 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * 15-pin power connector * LED lighting ----General components: * Front support winch * Outboard folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm at the front right, outside on the front panel * Side impact protection * Plastic quarter fenders ----Loading area: * 50 mm hardwood floor * Provision for retrofitting 20" container locking devices in front of the front panel and at the rear * Screwed front panel made of smooth sheet metal * Steel side walls - trapezoid profiled - foldable, divided in the middle 1x * Steel rear wall can be slid in between the ramps, bracket for storage when not in use inside in front of the front panel * Rear crossbars screwed on ----Load securing: * Perforated outer frame, angled approx. 45 degrees, with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side * 1 x 6.3-ton lashing eye in each corner at the front and rear * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: Pgodsl Thvxopfx Apmeu * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Chassis, drawbar, front panel, rear gate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling, and support winch painted in a black tone * Side panels in RAL 9010 pure white ----Information: * --reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA - R 14.4 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * 15-pin power connector * LED lighting ----General components: * Front support winch * Outboard folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm at the front right, outside on the front panel Pedol Th Dfopfx Apmegu * Side impact protection * Plastic quarter fenders ----Loading area: * 50 mm hardwood floor * Provision for retrofitting 20" container locking devices in front of the front panel and at the rear * Screwed front panel made of smooth sheet metal * Steel side walls - trapezoid profiled - foldable, divided in the middle 1x * Steel rear wall can be slid in between the ramps, bracket for storage when not in use inside in front of the front panel * Rear crossbars screwed on ----Load securing: * Perforated outer frame, angled approx. 45 degrees, with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side * 1 x 6.3-ton lashing eye in each corner at the front and rear * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Chassis, drawbar, front panel, rear gate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling, and support winch painted in a black tone * Side panels in RAL 9010 pure white ----Information: * --reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf