Road sweeper

Bucher - GMeiner - Giletta V65h DAF

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange Dcedpfxou Ay Tzj Aaxeg - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Condition: used, Year of construction: 2024, operating hours: 930 h, power: 175 kW (237.93 HP), empty load weight: 16,000 kg, Operating hours: 930, First registration: 23.09.2024 Double-sided dirt collection, towed Basic equipment Controls Main control panel mounted in the center of the cabin with JVM for displaying information on a wide range of sweeper functions plus download capability for recorded data. In addition, the JVM display can show images from up to four cameras. A separate control console with a palm rest for operating main sweeping functions is mounted on the door side. Suction blower Variable suction speed from 1,800 rpm to 3,500 rpm to adapt to different applications. V65t: Higher gear ratio: 1.79:1 Disc brush (gutter brush) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cabin). Highly visible signal yellow brush plate and hose routing. Suction mouth Suction mouth made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. 'Pressadrain' water recycling system. EUnited 4-star certificate according to PM10. Electric system 24 V All external wiring harness connections comply with IP67 protection rating. External noise/sound power level LWA 108 dB(A) for standard power engines, measured according to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC directive 2000/14/EC. Sweeping debris container The structure consists of the debris container and integrated water tank. Made from highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side service doors and side storage compartments. A water strainer allows the use of the debris container as a large water tank for street washing. Rear discharge lid, automatic multi-stage debris container support, two protected rear rotating beacons, and LED work lights are standard. Container volume 6.5 m³ Tip angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank with anti-slosh protection can be filled from a Type 'A' hydrant. The double diaphragm pump is suitable for continuous operation and even dry running. Water volume 1,545 l (optional 2,000 l) Exhaust hood The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush Roller brush Ø 406 mm Roller brush width 1,275 mm Suction mouth width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Dedsw Ehx Espfx Aaxjcg Special equipment - Superstructure with hydrostatic drive (V65h) and hydraulic auxiliary drive with HGB2 gearbox - Sweeping assemblies arranged for right-hand operation - Pneumatic lifting and lowering of the air guide screen in the dirt container - Pneumatically operated shaker device for air guide screen - Chain curtain in the dirt container in front of the air guide screen - Water tank connection coupling Type A, Storz 2 1/2 inch - Wastewater drain filter with graduated perforation mounted on the rear door, enables more efficient draining of the dirt compartment (see PI611) - Mounting frame on the rear door for attaching additional equipment - Additional spray nozzles on the rear of the suction mouth (Ni