Telescopic loader

Merlo TF 42.7

Condition: used, Year of construction: 2019, operating hours: 4,100 h, load capacity: 4,200 kg, lifting height: 7,100 mm, fuel type: diesel, construction height: 2,490 mm, Equipment: cabin, head guard, Merlo TF 42.7-140 telescopic forklift, 7.10 m, 4.2 t Hjdpfx Afjxz Iiajhefb >> Machine with German road approval // 40 km/h machine

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 142 h, maximum speed: 40 km/h, Operating hours: 142, First registration: 16.01.2024 Maximum lifting capacity: 4,200 kg Maximum lift height: 7,000 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with pallet forks: 8,170 kg Total weight without pallet forks: 8,000 kg Engine: 4-cylinder Perkins 904J, 3.6 l displacement, water-cooled Power: 100 kW (136 HP) at 2,300 rpm Hydraulic reversing fan Stage V Diesel particulate filter, oxidation catalyst, and SCR catalytic converter with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive: Pump electronically controlled with variable output; Motor: variable displacement motor Hfjdpfjpcht Hjx Afhob EPD PLUS including optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears, electrohydraulic control Vmax: 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: enclosed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear window wipers Sunshade roller 4x1 electronic joystick with capacitive release including travel direction switch CS = hydropneumatic cab suspension Telescopic boom, 2-piece with electronic end position damping (Soft Stop) Attachment carrier quick-change system, type “ZM2”, hydraulically controllable from the cab Hydraulic steering 3 steering modes: all-wheel, front-wheel, crab Drive: permanent all-wheel drive Axles: front rigid, rear oscillating Brakes: servo-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine is off Frame: high-strength steel construction Hydraulic system: variable output “LOAD SENSING” pump Hydraulic working flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V Battery: 100 Ah Alternator: 120 A Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition, and overload shut-off Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer coupling, hydraulic reversing fan, radio pre-installation, work lights on the cab (2 front, 2 rear), preparation for auxiliary function on boom head, 2 hydraulic connections on boom head, load guard on attachment carrier, lighting for road travel, automatic battery main switch, electrical connection cable in telescopic boom, acoustic reverse alarm, lift cylinder support for safety Options: EU type approval as tractor/towing vehicle for 40 km/h including self-locking trailer hitch (30/32 mm pin), including trailer light connection Air conditioning Boom suspension (B.S.S.) LED work lights on the cab (2 front, 2 rear), 2 work lights on end of first boom section ASCS upgrade: monitor with all ASCS functions + ...

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic Equipment / Technical Data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to tool carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg - Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversible fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive - Pump: electronically controlled with variable displacement - Motor: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral hydraulic oil HVI 46 - Transmission: 2 gears, electrohydraulically controlled Hedpfx Asuycgfefhefb - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap belt - ROPS/FOPS-certified - Heating - Front, roof and rear windshield wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector switch - CS = hydropneumatic cab suspension Telescopic Boom - 2-part telescopic boom with electronic end position damping (Soft Stop) Attachment - Quick coupling system type "ZM2", hydraulically controlled from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle fixed - Rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels, automatically acting parking brake when the engine is off Chassis - High-strength steel frame design Hydraulic System - Load Sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stabilisation Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition, and overload shutoff Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo-assisted brake - Hydraulic oil cooler - Rear mounting plate for trailer hitch (AHK) - Hydraulic reversible fan - Radio pre-installation - Work lights on cab (2 front, 2 rear) - Preparation for additional function at boom head - 2 hydraulic connections at boom head - Load protection grate on tool carrier - Lighting for road use - Automatic battery main switch - Electric connection cable in boom - Acoustic warning signal when reversing - Boom support cylinder for securing Optional Equipment - EU approval as tractor 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights at base of first boom section - ASC

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,074 h, maximum speed: 40 km/h, Operating hours: 1,074, First registration: 11.10.2022 Basic equipment/technical data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to carriage: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 engine, displacement 3.6 l, water-cooled - Output: 105 kW (143 hp) at 2,300 rpm - Hydraulic reversing fan - Emissions standard Stage V - Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Drive system: - Hydrostatic drive - Pump: electronically controlled with variable flow rate - Motor: variable displacement motor - EPD TOP incl. optional automatic speed increase - Mineral hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max. speed: 16 / 20 km/h in 1st/2nd gear (optional 40 km/h) Cabin: - Fully enclosed cabin - Split door - 360-degree all-round visibility - GRAMMER air-suspended seat (V3611) with lap belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 joystick, electronically operated with capacitive release incl. direction switch - CS = hydropneumatic cab suspension Telescopic boom: - 2-part telescopic boom with electronic end position damping (Soft Stop) - Attachment carrier quick coupling system Type 'ZM2', hydraulically operated from cabin Steering: - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive: - Permanent all-wheel drive Axles: - Front axle fixed - Rear axle oscillating Braking system: - Power-assisted disc brakes on all four drive shafts - Automatic parking brake on engine stop Chassis: - High-strength steel frame construction Hydraulics: - Load sensing pump with variable displacement - Work hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - Battery: 100 Ah - Alternator: 120 A Stabilisation control: - Simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual warning, attachment recognition, and overload shut-off Tyres: - 460/70 R 24 Michelin XMCL Standard equipment: Hfsdpfx Aetu Sztsfhsb - Power-assisted brake - Hydraulic oil cooler - Rear plate for mounting tow hitch - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Boom head pre-installation for auxiliary functions - 2 hydraulic connections on boom head - Load protection grid on attachment carrier - Road lighting - Automatic battery disconnect switch - Electric cable in boom - Acoustic reverse alarm - Boom support for safety Optional equipment: - EU road homologation as tractor/agricultural tractor 40 km/h incl.: auto-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connection. For compact and medium models, height-adjustable version recommended - Air conditioning - Boom vibration damping (B.S.S.) - LED beacon on cab roof (approval responsibility lies with ...)