Standard-SZM

Volvo FH 500 6x2/4 I-Save + Full Air

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front Hedpfx Aohlz R Ssaaenk -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, mileage: 1,114,000 km, first registration: 06/2012, overall weight: 18,000 kg, gearing type: semi-automatic, emission class: euro5, Suspension: air Hnedeym R Ahopfx Aaajk

Condition: used, maximum load weight: 30,690 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 09/2026, loading space length: 15,440 mm, loading space width: 2,550 mm, loading space height: 770 mm, total width: 2,550 mm, total height: 770 mm, Year of construction: 2023, Equipment: ABS, 3-axle semi low-loader KÄSSBOHRER, extendable, first registration as new. Fifth wheel height: 1,150 mm Overall length: 13,190 mm Telescopic sliding platform, width: 300 mm Gooseneck length: 3,950 mm Low bed length: 9,240 mm + telescopic extension: 6,200 mm Loading height (low bed): only 770 mm Unladen weight: approx. 11,317 kg Chassis partially metallized visible parts BPW axles with drum brakes 1st axle: lift axle 3rd axle: trailing steering axle WABCO EBS with rollover stability support (RSS) 12x 205/65 R 17.5 MICHELIN tires Oversize package up to 3,000 mm width Aluminum approach ramps, width: 600 mm, length: 2,400 mm, load capacity up to 32 tons Lashing rings: 6 pairs, load capacity 10 tons (heavy-duty) 8 pairs, load capacity 5 tons 6 pairs, load capacity 8 tons Hjdpfx Ajyxb E Sjaaonk 1x long material rack Large toolbox at the front, behind the bulkhead, transverse to the direction of travel (LxWxH): 600 x 830 x 2,310 mm RENTING is the NEW BUYING – also available immediately with our full-service rental!

Condition: new, maximum load weight: 34,815 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Cheese drill SPA Mega extendable HD platform trailer Immediately available TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4285 mm * Platform length 8,950 mm * Extension 6,900 mm Platform extension * Extension locking positions 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Gross vehicle weight (80 km/h) 45,000 kg * Gross vehicle weight (60 km/h) 46,000 kg * Unladen weight 10,185 kg CHASSIS: BPW axles with air suspension and disc brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * 1st axle liftable * Wabco brake system * Tires 445/45 R19.5 * 1x spare wheel holder CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm hardwood floor * 8x2 side extensions extendable up to 300 mm * Telescopic support winch front 50t capacity * Mechanically folding rear outriggers 45t capacity RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings Hjdpfx Aael N Syvjajnk * Stake pockets * Container locks suitable for 1x20 ft , 2x20 ft , 1x40 ft , 1x45 ft , * 1,700 mm steel end wall with Code XL certificate ACCESSORIES: 1x stainless steel toolbox * Stanchion box on bulkhead * 2 x 2 extra-wide boards with LED lighting * Rotating beacon Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us