Low loader

GOODYEAR K MAX T | 265/55 R 19.5 | trailer tire | with r...

Condition: used, maximum load weight: 23,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2013, next inspection (TÜV): 01/2025, loading space length: 19,100 mm, Equipment: ABS, Faymonville 3-axle Multimax low loader F-S43-1AAF Ez: .23 Total weight: 35,000 kg techn. permissible total weight: 58,600 kg Empty weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg max: 11,200 kg + 11,200 kg + 11,200 kg Support/fifth wheel load: 11,000 kg Length: 13,675 mm extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading area: 13,300 mm extendable to 19,100 mm Blodju Ry T Rjpfx Ahzeb Wheelbase: 2,900 mm / 1,360 mm Tires: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV until: ! more on request by email! Information without guarantee/errors excepted! Information provided on the Internet is non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input errors and data transmission errors. Subject to change. Continuous purchase and sale as well as trade-in and rental of cranes and lifting vehicles as well as construction machinery and heavy-duty vehicles

Condition: new, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Availability: Approx. 3-4 months after receipt of order Kässbohrer SLS HS3 3-axle low loader, rigid/not extendable NEW VEHICLE Axles / braking system: # BPW axles with drum brakes 17.5" # 3rd as self-steering axle # 1st axle as lift axle # WABCO braking system 4S/3M # 13 x branded tires 245/70/17.5" on steel rims Low loader: # Fifth wheel height: 1250 mm # Low bed length: 9,240 mm # 8 x 2 lashing eyes 6 tonnes in the outer frame # 6 x 2 lashing eyes 6 tonnes in the neck # 6 x 2 lashing eyes 6 tonnes on the low bed # Extra-wide brackets 300 mm extendable # Galvanized grating floor # Color: RAL 3020 Traffic red # PARTIALLY METALIZED Ramps: # Hydraulically movable ramps with galvanized grating floor # 4,200 mm long x 850 mm wide x 9° ramp angle # Electro-hydraulic pump 2kW # NATO socket for operating the electro-hydraulics including cable Gooseneck ramp # 2,800 mm long x 2,550 mm wide x 10° ramp angle # 2 x box for accessories under the gooseneck ramp Other: # 4 x over-width signs with holder for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full trailer support at the front Bledpfx Ahevm Nm Uozob # Manual rear support galvanized # 2 inch kingpin # 24V lighting system Aspöck # E-bike holder with spare wheel ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: used, empty load weight: 8,340 kg, maximum load weight: 32,660 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 03/2025, loading space length: 13,360 mm, loading space width: 2,500 mm, total length: 25,500 mm, total width: 28,500 mm, total height: 127,000 mm, suspension: air, tire size: 235 / 75 R 17,5, color: red, Year of construction: 2020, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, two-part aluminum ramps 20,000 kg spring-supported, air-lift suspension, lifting and lowering, lift axle 1. axle, steered trailing axle + hydraulic maneuvering aid with radio remote control, trailing steering, wheel recesses, stake pockets, toolbox, aluminium supports, widening plates, 2 x wheel recesses with aluminium wheel recess covers, excavator stick recess, rear drop supports, loading gauge, Nato socket for electric hydraulics, 2 x 3-chamber LED rear lights, container bridge, twist locks, 2 x LED work lights, levelling jack, fifth wheel height 980 mm Bljdpfetxrqqex Ahzjb

Condition: used, maximum load weight: 38,440 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available upon request. - Loading area with rear taper approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle self-steering - Technical axle load: 12,000 kg each - Air suspension with raise/lower valve - Topcoat in solid RAL 3002 carmine red - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Electro-hydraulic unit mounted at the rear under the loading area Blodpfx Aoxthz Tshzsb - Load gauge for determining axle loads, including load chart - On the gooseneck: removable ALU side walls and rear wall, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 6 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area - Galvanized extensions, extendable by approx. 230 mm per side - Lift axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear plate - HRM metallisation (High Resistance Metallisation)

Condition: new, empty load weight: 8,950 kg, maximum load weight: 40,050 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,950 kg, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer Blodpjwu Agisfx Ahzeb -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection