Tank container

CIMC 20FT ISO, 25.050L / 1-COMP / 3 BAFFELS / T11 / ...

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, tank capacity: 31,000 l, total length: 7,450 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 36,000 kg, number of chambers: 1, operating pressure: 3 bar, empty load weight: 4,400 kg, pressure: 4.5 bar, temperature: 130 °C, Equipment: type plate available, Stainless steel V4A tank container with a 50 cm manhole cover and a second 50 cm manhole cover. Bottom outlet 3 inch BSP, equivalent to 7.5 cm. Insulated, cleaned, (can be heated). Located in Ludwigshafen. Delivery available. Additional photos, including interior shots, available upon request. All information provided without guarantee; errors and prior sale excepted. Iodpfoufgkvox Afdsa

Condition: good (used), Year of construction: 2003, functionality: fully functional, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, number of chambers: 1, operating pressure: 3 bar, empty load weight: 3,630 kg, next inspection (TÜV): 08/2026, loading space volume: 29 m³, loading space length: 7,150 mm, loading space width: 2,550 mm, loading space height: 2,670 mm, filling opening width: 500 mm, pressure: 4 bar, temperature: 150 °C, Equipment: type plate available, Tank container made of V4A stainless steel with two dome covers (1 x 50 cm and 1 x 30 cm) and a 3-inch BSP (equal to 7.5 cm) bottom outlet. Two walkways at the top with folding railings. Line for compressed air discharge with operation from below. ADR valid until August 2026. Location: Hamburg. All information is provided without guarantee; errors and prior sale excepted. Iodovxgkhepfx Afdea

Condition: excellent (used), Year of construction: 2007, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO Tank Container 25,060L / 1 compartment with 3 baffles (partial loading possible) / 4 manholes, UN PORTABLE, T12 Steam heating Bottom discharge Payload: 32,050 kg Design temperature: -40/+130 °C Valid 2.5Y + CSC inspection until 12-2026 = Further Information = General information Year of manufacture: Nov. 2007 Model year: 2007 Usable for: Chemicals Weights Tare weight: 3,750 kg Payload: 32,250 kg Gross weight: 36,000 kg Functional Tank capacity: 25,000 l Body manufacturer: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Iedpfxexnqp Nj Afdea Condition Technical condition: Very good Visual condition: Very good Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, tank capacity: 29,500 l, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, number of chambers: 1, operating pressure: 4 bar, empty load weight: 4,060 kg, filling opening width: 500 mm, pressure: 6 bar, temperature: 150 °C, water tank capacity: 29,500 l, Equipment: type plate available, Stainless steel V4A tank container with two top manhole covers (1 x 50 cm and 1 x 30 cm) and a bottom outlet of three inches, which corresponds to 7.5 cm. Two top walkways and folding safety rails. Insulated, cleaned (and heatable). Location: Rotterdam. All information subject to change; errors and interim sale excepted. Ijdpexdvbvofx Afdoa

Condition: new, total width: 3,000 mm, empty load weight: 3,000 kg, loading space volume: 30 m³, | Diesel tank | 30,000 liters | H: approx. 3m | Length approx. 10m | Diameter: approx. 2m | Good condition | Delivery possible for an additional charge if it is assured that there is an unloading facility (crane or forklift) | Errors, input errors and pre-sales subject to reservation Ijdpfx Aovpv Ansfdoa

Condition: used, Year of construction: 2003, functionality: fully functional, tank capacity: 26,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, operating pressure: 4 bar, pressure (max.): 6 bar, empty load weight: 4,040 kg, filling opening width: 500 mm, pressure: 6 bar, temperature: 130 °C, water tank capacity: 26,000 l, Equipment: type plate available, Stainless steel V4A tank container with four "compartments", four dome lids (1 x 50 cm and 3 x 30 cm), and a bottom outlet with a three-inch BSP thread, equivalent to 7.5 cm. ADR-WHP 2.5 new, valid until 4/2028. Location: Hamburg. All information provided without guarantee, subject to errors and prior sale. Isdpfx Aoxf Nwtofdja

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Emergency Release for Spring Brake Cylinders * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Equalizing Unit * Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 15-pin electrical connector * LED Lighting Iedpfxjv D Tcbo Afdsa * Support crank at front * Folding external stabilizer legs at rear * Plastic tool box approx. 858 x 500 x 500 mm mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Fixture in front of front wall and rear slope for subsequent installation of container locks for transporting 20" containers * Bolt-on smooth sheet front wall * Side walls made of trapezoidal profile steel sheet, drop-down, divided once in the middle * Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the front wall when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm, provision for installation of 3 t folding lashing rings every 600 mm, 1 x 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear cross members for 1.2 t lashing options * One-piece mechanical grating approach ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm on chassis * Drawbar, front wall, tailgate, folding supports, and approach ramps hot-dip galvanized * --- Axles, springs, air tanks, flange coupling, and support crank painted in black --- * Reinforced and certified structure according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Bodywork painted in RAL 9010 pure white * Body sides can be painted in a RAL color at extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 47/2025