Three-way tipper trailer

MÜLLER-MITTELTAL 11,9 to., verst. Strongwände, Kombi- Heckklappe

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer assembly * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Height-adjustable drawbar (adjustment range 300 mm) with 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear—activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at central locking mounts and 2 on the front wall * Chassis made of fine-grain steel * Two-step access ladder in front of bulkhead on driver's side * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" drop sides * Continuous upper sidewalls with internal tube reinforcement—no centre stanchions—foldable with drop side spring assist Gbsdpfxsxf Sk Aj Aaxjw * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, 270° swing and lockable—not foldable—plus additional swing frame for automatic tail opening during tipping * Locking via galvanized rotary bolt latch at rear and central locking * Deactivation function for automatic tailgate operation when tipping rearwards with doors open * Lashing points: 1 x 5 t in each corner, 4 x 3 t on each side sunk into the external frame * 4 mm floor plate made of S 420 MC 4 fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate to EN 12642 XL * 1 pair aluminium loading ramps approx. 3,310 x 400 x 105 mm (8 t/pair load capacity) suitable for rubber-tyred and tracked vehicles, lockable storage compartment under the platform at the rear of the chassis * Chassis, drawbar, tipping platform, bulkhead, underrun protection, rear stanchions, rear folding supports, and entry step hot-dip galvanized * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Height-adjustable drawbar (up to 300 mm) with a 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, fitted front right on the chassis * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underride protection Gedpfsxf Skvsx Aaxsbw * Plastic quarter mudguards * Lashing hooks at the positions of the central locking system and 2 pieces at the front wall * Chassis made of high-strength fine-grain steel * Two-step access ladder front left of the bulkhead * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" side walls * Continuous upper side walls with internal tube reinforcement – without center vertical stanchions – foldable with sidewall spring lift * Rear stanchions bolted * Combination steel swing doors at the rear, 2-wing, asymmetrically split, pivotable and lockable up to 270°, non-foldable, with additional pendulum frame for automatic tailgate opening during tipping * Locking by galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate operation when tipping backwards with open swing door * Each corner with one 5 t lashing ring and each side with four 3 t lashing eyes recessed in the outer frame * 4 mm floor plate made of S420 MC 4 fine-grain steel * Rear mounting rails for drive-on ramps * Body (reinforced) with load securing certificate to EN 12642 XL * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles, lockable storage compartment under the loading area at the rear, integrated into the chassis * Chassis, drawbar, tipper platform, bulkhead, underride protection, rear stanchion, rear folding supports as well as access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * Tire pressure monitoring with in-cab display via EBS signal - no vehicle-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Mechanical BPW support winch at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin electrical connector * LED lighting system 12/24 V * Two LED reversing lights at the rear - activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in the central locking mounts and two at the front bulkhead * Chassis made of high-strength fine-grained steel * Two-step access in front of the bulkhead on the left (FR) * Steel pallet three-way tipper body with reinforced 600 mm Strong side walls * Full-length side walls with upper internal tube reinforcement -foldable without central stanchions- assisted by side panel coil springs * Bolt-on rear stanchions * Combination steel wing doors at rear, asymmetrically split, 2-leaf, swiveling 270° and lockable - not foldable - with additional pendulum frame for automatic tailgate opening during tipping operation * Locking via galvanized rotary bar lock at the rear and central locking system * Deactivation function for automatic tailgate operation when reversing with opened wing door * Each corner fitted with 1 x 5 t lashing ring and 4 x 3 t lashing rings recessed into outer frame on each side * 4 mm floor plate made from S 420 MC 4 high-strength fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment beneath the load area inserted in the chassis at the rear * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchion, rear folding supports, and access step hot-dip galvanized * Side panels and tailgate painted RAL 3003 ruby red * Axles, suspension, air tanks and landing gear painted in a shade of black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf Gsdpfexf Skpex Aaxsbw