Swap chassis trailer

Wiese Abrollcontainer für Baustelle/Werkstatt/..

Condition: used, overall weight: 18,000 kg, first registration: 01/2009, total width: 2,550 mm, total height: 3,000 mm, Jumbo swap bodies from various manufacturers - Prices from €1,000 net, depending on condition and age. - Over 50 units in stock - Immediately available - Delivery possible for an additional charge - Tandem axle trailers also available WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us easily via WhatsApp. Errors and prior sale reserved. Internal vehicle numbers: -8902a -10432a -10424a -10423a Hedpfowv U Twex Affsh -10490a -10431a -10505a -10473a -10508a -10420a -10421a -8765a -8585a -8886a -8592a -8769a -3485 -8903a -10549a -10550a -10544a -10545a -10537a -10541a -10540a -10551a -10543a -10548a -8768a -8618a -10116a -10479a -10092a -9955a -10546a

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2016, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2016, WhatsApp WECON Curtainsider Sliding-Platform-BDF Swap body Duke type WPR 715 SG Year of construction German first ownership! 4 pieces WPR 715 SG with the following equipment: WECON standard sliding curtainsider swap body Duke type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Tare weight: 2,590 kg Permissible total weight: 16,000 kg Interior height 2,200 mm with sliding roof included External height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear through-loading height: 2,165 mm Forklift pockets at the rear in the floor frame Hsdpfxou Uxr Ro Affjh Reinforced version of the zinc tubes for carrying a truck-mounted forklift. Bracket required for securing chains on the body. --> Limited centering tunnel due to reinforced design Suitable for continuous use! Floor frame: Made of galvanized quality steel, height 215 mm, Container corner fittings 4-fold on 20' base, 4 gripping edges acc. to EN 284, wheel freewheel 120 mm Floor covering for swap bodies: Multi-glued plywood floor approx. 25 mm thick, can be driven on with a forklift truck, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1320 mm, galvanized version 15 pairs of lashing rings. Distribution: From VK STW to the middle of the 1st pair of lashing rings approx. 400 mm, then even distribution of the remaining lashing rings Lashing rings, 1 pair, mounted on the inclusive inside of the end wall stanchion Height 1000 mm from top edge of floor Pallet stop edge 30 mm high on one side on the left in the direction of travel, normal tarpaulin side. Lashing options through slotted holes (approx. 15 x 30 mm) Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height in cassette construction (galvanized cassettes) Screen printing plate on the inside of the front wall 1500 mm high, 12 mm thick Front wall inside with collision protection consisting of 300 mm high, galvanized sheet steel Portal double wing door smooth, sandwich, 4 internal espagnolette locks, 4 hinges per door wing. Left-hand side panel sliding tarpaulin in accordance with DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure safety device. 1 central stanchion, symmetrically arranged --> left-hand direction of travel Stanchions each with 3 rows of slat pockets included and one row of collection pockets (approx. 600 mm high) on the floor 8 aluminum insertable slats, driving direction left, approx. 100 mm high Wecon RAPIDO RIGHT vertical steel profiles attached to the side tarpaulin and guided by rollers in the upper and lower running rails. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insertion slats are omitted Fixed tarpaulin roof design as sliding roof Standard only fixed. Canopy with side-by-side running rails, width between the running rails approx. 2,370 mm, distance from lower edge of running rail to lower edge of bows approx. 90 mm Coating: Base frame and support legs hot-dip galvanized, superstructure parts dip primed and powder-coated in a standard RAL color, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV certificate Code XL included The certificate confirms the load securing effect of the ve