Tipper trailer

Conow HW 80 Zug V4.2

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Fgedpfx Alohlz R Sstec Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, mileage: 697,260 km, power: 537 kW (730.12 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, parking heater, * Multifunction steering wheel * Auxiliary heater/air conditioning * DAB+ radio * Refrigerator * Second sleeper bunk * Blind spot camera Fjdoxl Nxwopfx Altsgc * Adaptive cruise control * Lane departure warning * Hill-start assist * Brake warning * Full air suspension * Retarder * Lift axle * Alloy wheels -----Internal vehicle number: 11399----Errors & interim sale excepted.

Condition: new, empty load weight: 12,000 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable load platform: - Load platform in extendable design with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the deck (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, over the axles checker plate flooring Landing legs: - JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Brake system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - High-strength fine-grain steel construction Axles and tires: Fsdpfx Alsykpbkotegc - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle service kit - TPMS tire pressure monitoring system as per ECE R 141 - Tires 245/70 R 17.5 3PMSF Included accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized connection rail at the front - 4 wheel chocks with holder at the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power pack - Remote steering, operable from front and rear via cable remote with push buttons, with steering alignment indicator - European reflective signs (red-yellow) at the rear of the trailer - White reflective tape as per EU regulations on the sides and on the extension, rear in red - Holder for warning panels on both sides of the gooseneck and at the rear, including socket - Galvanized, extendable side extensions, extendable by approx. 230 mm per side - One beacon bracket at the rear of the trailer - Galvanized folding supports under the rear bevel of the deck - One mudflap at the rear of the trailer - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable protective cover around the pump - Removable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized drop-in stanchions are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 mm on the gooseneck - Note: the box covers the oil filler plug - 4 pairs of WADER container locks in the deck for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 7 pairs of pockets for drop-in posts 100 x 50 mm in the outer frame of the load platform - Adjustable hanging rail for ALU loading ramps at the rear of the vehicle - Square anti-slip strips 20 x 20 mm every 200 mm on the outer frame of the deck slope - Lift axle on the front axle controlled by TEBS-E depending on the actual axle load and loading condition - Four extendable warning signs, approx. 400 mm each, approx. 423 x 423 mm with position lamp - Mounting bracket for beacon on warning signs - Radio remote control for remote steering, in addition to cable control, with indicator LEDs on receiver for tracking alignment - Coated sand layer on checker plate surfaces on the gooseneck and deck as slip protection - 80 km/h speed stickers at rear and both sides - Load gauges for determining axle loads, including load chart