Three-way tipper trailer

Hapert Anschlag oben – danach kommt nichts mehr

Condition: new, empty load weight: 1,170 kg, maximum load weight: 2,330 kg, overall weight: 3,500 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 900 mm, Hapert 3 side tipper Cobalt HM Perm. total weight: 3500 kg 405x200x +++*IMMEDIATELY AVAILABLE+++* With drive-on package, anti-sway bars, parabolic suspension, damper 100 km/h approval and certificate 70cm extension drop sides Pendulum You can use this three-way tipper every day to transport bulk goods, but this robust tipper is also perfect for your excavators and other machines. Dedpoqwkp Hofx Afmswd As the Cobalt HM can be tipped on three sides, it is particularly suitable for use where there is not much space available. The Cobalt HM is equipped with a steel floor, electric pump with battery and hand pump so that you can unload your freight quickly and efficiently. Because time is money for you too. TÜV-approved load securing system Designed dropside hinges for easy attachment of the cargo net 4 removable corner stanchions Aluminum walls, 30 cm high, with robust recessed locks If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, functionality: fully functional, machine/vehicle number: Hapert Cobalt Plus Tandemachser 4,05×2,00×0,40m 3500kg Dreiseitenkipper, empty load weight: 1,316 kg, maximum load weight: 2,184 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3.24 m³, Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Battery charger - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - High front grille - Additional dropside hinges for more stability and pressure resistance - Three hinges at the front and six at the sides - Double-walled powder-coated aluminum drop sides, 40 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading rails - Low chassis - Towing ball coupling with safety indicator - Reinforced jockey wheel and reinforced jockey wheel bracket Loading area and floor - Galvanized steel floor in one piece - 3 mm thick galvanized steel plate Lighting equipment - LED lighting and lighting protection - Modern multifunctional lighting - with rear fog light - with reversing light - with front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers Dwodpfxjvf Nvmj Afmod - Smooth ride comfort - 185/70R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 6 recessed fastening brackets integrated in the frame according to DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, empty load weight: 1,170 kg, maximum load weight: 2,230 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,051 mm, loading space width: 1,964 mm, loading space height: 900 mm, suspension: steel, tire size: 195/50 r13, Hapert 3 side tipper Cobalt HM2 Perm. total weight: 3500 kg 405x200x Black special edition *IMMEDIATELY AVAILABLE* With drive-on package, anti-sway bars, parabolic suspension, damper 100 km/h approval and certificate 70cm extension drop sides pendulum You can use this three-way tipper every day to transport bulk goods, but this robust tipper is also perfect for your excavators and other machines. As the Cobalt HM can be tipped on three sides, it is particularly suitable for use where there is not much space available. The Cobalt HM is equipped with a steel floor, electric pump with battery and hand pump so that you can unload your freight quickly and efficiently. Because time is money for you too. Djdjqwlc Ijpfx Afmjwd TÜV-approved load securing system Designed dropside hinges for easy attachment of the cargo net 4 removable corner stanchions Aluminum walls, 30 cm high, with robust recessed locks If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, machine/vehicle number: Hapert Cobalt HM-2 4,05×2,00m 3500kg elektrisch +Nothandpumpe +Parabelfeder, empty load weight: 1,182 kg, maximum load weight: 2,318 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, Installed accessories - Parabolic suspension incl. wheel shock absorbers - Drive-on package (ramp shaft, two aluminum ramps, two crank supports) - E-pump including emergency hand pump Hydraulics (tipping and lowering system) - Electric three-way tipper - rear tipping angle 49 degrees, side 45 degrees - Large 5-stage hydraulic cylinder - Emergency hand pump, convenient lowering via emergency hand pump possible - 12V battery and hydraulic unit protected in steel box - Removable tilt control unit with long spiral cable - 3-phase charge status display via tipper control unit - 7-pin socket mounted on the trailer with charging cable Drive-on package - in the frame, behind the license plate, integrated rail shaft - Two reinforced aluminum drive-on ramps, 2.50 m long with anti-slip protection - Two sturdy crank supports, foldable by pulling mechanism - one hand crank with carrier Dropside, railing and co. - additional dropside hinges for more stability and pressure resistance - Three hinges on the front and seven on the sides - double-walled anodized aluminium drop sides, 30 cm high - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to platform trailer - With durable and high-quality corrosion protection - HAPERT locking system: robust, recessed locks with double action Hanging option for tarpaulins and nets - New dropside hinges incl. attachment option for a cargo net, among other things Chassis and frame - Chassis completely welded and fully bath-galvanized - Tipper bridge completely welded and fully bath-galvanized - Bolted V-drawbar - U-profile at the rear, for easier attachment of the loading ramps - Low chassis 195/50R13C tires - Towing ball coupling with safety indicator - Height-adjustable Hapert automatic support wheel with hardened castor Loading area and floor - Galvanized steel plate attached to the multiplex floor - Sendzimir sheet steel 1.5 mm thick - Continuous and waterproof multiplex floor - Finnish birch plywood, 11-ply waterproof press-glued - 15 mm thick Lighting equipment - Modern multifunctional lighting - with rear fog light - with reversing light - with LED front marker lights - 13-pin plug Wheels and axles - Combination suspension/wheel suspension system - Parabolic suspension incl. shock absorbers - Smooth ride comfort - 195/50R13C tires with black rims - Maintenance-free compact wheel bearings - with automatic reverse Lashing and securing options - TÜV-certified load securing system from HAPERT - 8 recessed fastening brackets integrated in the frame in accordance with DIN standard with 1000 dAN (kg) per eyelet - Further recessed fastening brackets integrated in the frame can be retrofitted Documents and freight costs Dsdpfji Awa Dex Afmowd - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Documents and freight costs - Freight costs to us already included - incl. vehicle registration certificate (registration certificate part 2) - Incl. COC document (EEC Certificate of Conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. Simply enter "Dapper trailer" in your search engine.