Aerial platform

Mercedes-Benz Sprinter 516 CDI 14 M Custers Hoogwerker Hubar...

Condition: used, functionality: fully functional, mileage: 73,000 km, power: 240 kW (326.31 HP), number of beds: 4, number of seats: 2, fuel type: diesel, gearing type: automatic, color: black, first registration: 04/2013, next inspection (TÜV): 06/2026, chassis manufacturer: Daimler Truck, chassis model: MB Zetros 6x6, total length: 10,668 mm, total width: 2,500 mm, total height: 3,680 mm, axle configuration: 6x6, emission class: euro5, empty load weight: 18,600 kg, operation weight: 20,000 kg, maximum load weight: 1,400 kg, steering wheel position: left, tire size: 455/65 R22,5 / 14,00 R 20, number of previous owners: 2, Year of construction: 2013, Equipment: ABS, additional headlights, air conditioning, all wheel drive, all-season tires, bathroom, cruise control, differential lock, fog lights, full service history, navigation system, non-smoking vehicle, onboard kitchen, parking heater, power assisted steering, satellite antenna, shower, solar array, High-mobility expedition motorhome based on Mercedes-Benz Zetros 6x6 The ideal world travel vehicle for 2 people seeking maximum comfort and reliability. Make your dream come true today. Save yourself the usual 2-3 years of planning, construction, and testing. The offered vehicle has been travel-proven and is in excellent, very well-maintained condition. Csdewtl Aqepfx Ah Tegp It is therefore immediately ready for use for your grand adventure. No previous experience is required. We will familiarize you with your new mobile home and assist you as much as you wish. The vehicle is registered in Switzerland and can remain registered there for international buyers as well.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, Cedpfx Asgcw Rmjh Tegp electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, maximum load weight: 33,320 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 3,977 mm, Equipment: ABS, STAS moving floor +/- 92 cbm, Cargo Floor with 21 10 mm planks, hydraulic tailgate, hydraulic roof, stainless steel wear plate at the rear under the moving floor, slide-in/out function, cable remote control, loading gauge, service door in the bulkhead, access and standing area at the front of the body, work lights, ABS, EBS, SAF Intra CD axle(s), disc brake system, aluminum drop legs, air suspension, Wabco SmartBoard, vehicle can be wrapped and/or lettered with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle can be wrapped and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. Cjdpfx Aewcilnsh Togp We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 07/2025, Year of construction: 2012, Equipment: ABS, GOOD CONDITION ----LIFT AXLE Cgedpfex Sizbjx Ah Tep

Condition: used, functionality: unexamined, empty load weight: 8,100 kg, maximum load weight: 24,000 kg, Year of construction: 2009, The moving floor trailer is designed for the flexible transport of a wide variety of goods. Bulk materials such as wood chips, waste, or sawdust can be easily transported and unloaded using the standard moving floor system. It is also suitable for handling palletized goods and general cargo. Additionally, the trailer is equipped with an integrated blowing system. Material is conveyed to the center of the vehicle via a screw conveyor and then dosed into the airstream using a rotary valve. This allows, for example, wood pellets to be blown into storage rooms or animal feed to be conveyed into silos. Other free-flowing bulk materials can also be blown in reliably and in a controlled manner using this system. The moving floor was replaced in 2001. No blower on the trailer Cgodpsybbq Sofx Ah Top Payload approx. 24 t Volume 90 m3 Tropper Wood pellets Blowing Pumping