Open trailer with tarp

Eggers ZPT 10,5 EL Tandemanhänger Pritsche+Plane

Condition: used, mileage: 455,392 km, power: 132 kW (179.47 HP), first registration: 09/2012, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,374 mm, total width: 2,300 mm, total height: 3,235 mm, loading space length: 6,930 mm, loading space width: 2,360 mm, loading space height: 2,590 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, MAN 8.220 TGL box body with 4x2 tail lift Suspension: leaf-air Wheelbase: 5.20 m Equipment: - Engine brake - Digital speedometer - Radio-CD - Electric windows - Sun visor - Roof spoiler - Tail lift (1700 kg capacity) - Cupboards - table - Sleeping possibility Dodpfxet Dr H Uo Ah Docc - Seating (bench) - Window (right) - Door (right) We are also happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and omissions excepted.

Condition: used, mileage: 98,050 km, power: 240 kW (326.31 HP), first registration: 09/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, all wheel drive, crane, Special vehicle for service, rescue, fire department and much more, chassis: 4x4, single tires 60/80% good, cable winch Rotzler TRO30/6 Treibmatic, cable diameter 13mm, cable length approx. 65m, load 60 KN, superstructure: Rosenbauer RLF 1000/100, water tank 1000 liters, foam tank 100 liters, roller shutters, rotating compartments, equipment compartments, lighting, folding steps, reel with hose, power generator GTS 20 power 20 KVA, 400/230 V, 50 Hz, Std. 111, various sockets 32/16/200-250 V, socket at rear, hydraulic lighting mast approx. 6500 mm for 4x1000 W floodlights (without floodlights), Atlas Copco LFX 10 PB, max. output 10 bar, 2.07 cbm/min, PALFINGER crane type: PK8502 B, 2 point outriggers, radio remote control, 3 stage(s) hydr. extendable, max. lifting capacity 5460 kg, diagram: approx. 4.0m - 1960kg, 5.8m - 1260kg, 7.8m - 910kg, 9.9m - 710kg, Palfinger cable winch KBW005 power 11-15 KN, hydraulic side extension of the support legs, electrically extendable roof railing, blue light, siren, reversing camera, ABS, cruise control, diff. locks, exterior mirrors heatable and electrically adjustable, electric windows driver and passenger door, roof hatch, driver standard swing seat Isringhausen, automatic daytime running lights, fog lights, Rockinger trailer hitch, AdBlue tank approx. 35 liters, leaf suspension, new price approx. 500 000 Euro net, super condition Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Dcedpfxjir N T Eo Ah Djc

Condition: new, functionality: fully functional, empty load weight: 525 kg, maximum load weight: 2,175 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,600 mm, loading space width: 1,503 mm, Year of construction: 2025, Scope of delivery: 1x car construction machinery trailer with ramp 260x150cm 2700kg Description: Robust, welded trailer for transporting construction machinery and very heavy materials. The design offers walkable areas on the sides with an anti-slip function so that you can easily lash down your machine and get in and out. The supporting frame is made of closed steel profiles and is fully welded. The non-slip, waterproof plywood floor is equipped with solid lashing eyes to ensure the safety of the goods being transported. The trailer has an extremely robust V-drawbar. A shovel tray and a support wheel with automatic folding function are integrated as standard. Dcsdpfx Ahjvzmxqe Dsc Shock absorbers make it easier to lower and raise the ramp. Technical data: - braked - tandem - automatic support wheel - shock absorbers on the ramp - wheel chocks with bracket - shovel storage - lashing eyes - walkable side panels with anti-slip - foldable ramp with ramp support Total weight: 2700kg Own weight: 525kg Payload: 2175kg Length of the loading area: 2600mm Width of the loading area: 1503mm Total width: 2100mm Total length: 4600mm Total height: 1640mm Manufacturer: Martz Plug type: 13-pin Trailer type: construction machinery transport Number of axles: 2 axles Type of drawbar: V drawbar Position of the wheels: under the side walls Floor: screen-printed floor Trailer type: construction machinery trailer Type of frame: Welded Frame material: steel Purpose: Transporting construction machinery (excavators, wheel loaders, etc.) Shock absorbers: No (surcharge: 199 euros for 100 km/h extension)

Condition: new, maximum load weight: 1,750 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,300 mm, loading space height: 2,200 mm, ATLAS with sliding roof TECHNICAL DATA: * Trailer type: ATLAS with sliding roof similar to EDSCHA * Total weight: 3500 kg * Payload: 1750 kg * Loading area: L: 800 cm, W: 230 cm, H: 220 cm * Loading height: approx. 72 cm Dcsdpfsthl Nmsx Ah Dsc * Floor: Multiplex wooden floor * Frame: Steel, completely hot-dip galvanized * Electrics: 13-pin, 12V * Wheels: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 3x1350 kg * Braked axle * Support wheel as standard, automatic support wheel * Steel loading ramps L=250 cm * Cable winch AL-KO 900C * LED outline lights, 6 per side * Tarpaulin with bow H=220 cm, sliding tarpaulin system Professional on both sides * Center stanchions, all removable PLUS DEKRA APPROVAL 149¤ All prices include VAT !!! DIFFERENT TARP COLORS POSSIBLE!!! Images do not have to correspond to the standard equipment, technical changes (e.g. tire sizes) reserved. Delivery: Delivery by freight forwarder possible, per transport kilometer ¤ 1.50 throughout Germany one way (Seesen to destination) at least 270.00 ¤ plus VAT. Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=. You can also get your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. ?FINANCE OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images do not necessarily correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change.

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dcodpfx Ahsvzk Nae Dec Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: used, mileage: 75,773 km, power: 235 kW (319.51 HP), first registration: 09/2019, fuel type: diesel, tire size: 315/60R22.5, axle configuration: 6x2, wheelbase: 5,770 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 9,100 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Year of construction: 2019, Equipment: tail-lift, Man TGM 26.320 6x2-4 Lift + steering axle. Full air suspension. Loading box with curtain on the left side. Right side: Plywood with side door. Inside dimensions: 905 cm x 249 cm. Height: 255 cm. Winch: Warner 5400 kg. Dholandia tail lift: 6,000 kg. 267 cm. = Further information = Technical information Number of cylinders: 6 Axle configuration Tire size: 315/60R22.5 Suspension: Air suspension Front axle: Steered; Tire profile left: 75%; Tire profile right: 75%; Brakes: Disc brakes Center axle: Twin tires; Tire profile left inside: 75%; Tire profile left outside: 75%; Tire profile inside right: 75%; Tire profile outside right: 75%; Brakes: Disc brakes Rear axle: Steered; Tire profile left: 75%; Tire profile right: 75%; Brakes: Drum brakes Weights Unladen weight: 11,460 kg Payload: 14,240 kg Dcsdpouydfpsfx Ah Dsc GVW: 25,700 kg Functional Tail lift: Dhollandia 6000 kg, tailgate Identification Type number: TGM 26.320 / 6x2-4 / LBW / 6000 kg = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We make every effort to provide correct information, but no rights can be derived from the posted texts.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t Dcjdpfxoxq S H Ij Ah Dsc DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: good (used), axle configuration: 3 axles, first registration: 08/2014, color: grey, Year of construction: 2014, Equipment: ABS, crane, = Additional options and equipment = - Air suspension = Further information = Rear axle 1: Steered Rear axle 2: Steered Unladen weight: 14,100 kg Payload: 24,900 kg Gross vehicle weight: 39,000 kg Crane: AMCO VEBA 929, year of manufacture 2014 Dodpexxhzkefx Ah Dscc Technical condition: Good Visual condition: Good Crane trailer Turbo Hoet with AMCO VEBA 29 t/m crane 3-axle with steered axles Air suspension Crane: AMCO VEBA 29 t/m 6x hydraulically extendable 5th and 6th hydraulic circuit on the crane Radio remote control 4 x outriggers Crane and trailer are in good condition.

Condition: new, maximum load weight: 30,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 2,990 mm, total width: 2,550 mm, total height: 1,010 mm, Year of construction: 2025, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE PLATFORM SEMI-TRAILER RH100 - EXTENDABLE - for transporting building materials and construction machinery. NEW VEHICLE Gross weight (technical) 39 t Aggregate load (technical) 27 t Fifth wheel load (technical) 12 t Low weight approx. 9 t (+/- DIN tolerance) Platform length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Platform width approx. 2,540 mm Loading height front approx. 1,060 mm with fifth wheel height approx. 980 mm, rear 1,010 mm Extendable lightweight welded steel frame construction Extension length approx. 4,000 mm, lockable at intervals of approx. 500 mm Reinforced design for transporting building materials 20 t/5 m center of gravity. Transports construction machinery up to 20 t (when collapsed) Reinforced 6 mm U-profile outer frame 4 mm tapered cross members Rear frame slope, approx. 15°, approx. 500 mm Visual indicator for pneumatic load. Frame locking on both sides, with a green indicator lamp = indicator light for pneumatic frame locking on the front left saddle. Electrical chain in the central frame. Frame locking with integrated lubrication strip. 4 pairs of extendable 8 t lashing rings, 9 pairs of 10 t lashing rings at the rear, extendable in the outer frame profile, on both sides of the outer frame, foldable outwards for extra-wide lashing. 10 pairs of lashing pins with welded-in round steel on the bottom of the outer frame. 6 pairs of plug-in housings with reinforcement supports for 80x50x5 mm shaped tubular stanchions (lengthwise, approx. 3 mm clearance). Dcedpewfu N Rsfx Ah Djc 3 plug-in housing cross members for 80x80 mm shaped tubular stanchions, for center bars. Plug-in housing cross members as empty holders for shaped tubular stanchions. 6 pairs of recessed container locking devices for 2 x 20 ft containers. 1 x 20 ft container in the center. 2 x 20ft Container 1 x 30ft Container Reinforced rear end plate with continuous suspension rail for docking ramps Mechanical 2 x 12 t outriggers, single-sided operation + thrust compensation 2 rear drop-lift support legs SAF Intradisc B9 axles with 370 mm diameter disc brakes (19.5" disc), Load capacity 9 t/axle, on-road version Wheelbase 1,310 + 1,410 mm Wheelbase 7,650 mm Steering knuckle/friction-steered SAF trailing axle, approx. 10° steering angle, electropneumatic reverse lock, automatically engaged in reverse gear, additional for cab switch with release valve Special axle lift on the 1st axle, raises and lowers automatically depending on weight, with forced lowering, traction aid button cab / "3 x brakes" Odometer 6 x 435/50 R 19.5 tires 164J Goodyear Fuelmax T HL (tire load capacity 10 t/axle) 6x steel rims 14.00 x 19.5 Braking system according to EC Directive 71/320 ECE R13 2-wire compressed air braking system EBS system 2S2M, one axle with sensor RSS/RSP - Stability Program Spring-loaded parking brake Steel air reservoir Air suspension with raising and lowering device, total travel approx. 200 mm Automatic ride height 15 km/h Quick-release valves SWIT - Schwarzmüller Intelligent Telematics, "BASIC" performance package Axle load indicator EBS CAN bus signal Tire pressure monitoring according to ECE Directive 141 35 mm wooden floor, longitudinally mounted over the wheels Steel checker plate cover Wooden floor impregnated on both sides Reinforced Sheet steel front wall, approx. 1,800 mm + center supports integrated into the front wall 2 lashing eyes, top corner pillars Steel corner pillars integrated into the front wall, at the front end

Condition: new, empty load weight: 570 kg, maximum load weight: 2,130 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,000 mm, loading space height: 300 mm, tire size: 195/55R10C, Eduard HL 4020 High Loader 4 x 2 m 2700 kg Tandem Axle – with 30 cm Side Walls Technical Data: * Permissible gross weight: 2700 kg * Loading area: 406 x 200 x 30 cm * Loading height: 56 cm Dedpev Ruw Hsfx Ah Dscc * Tyres: 195/55R10C * Payload up to 2130 kg * Unladen weight with side walls: 570 kg Construction and Features: * Chassis with two robust longitudinal beams, fully welded and hot-dip galvanized * 15 mm phenolic resin floor panel * Double-walled aluminum side walls, 30 cm high, with continuous reflector strip * Plug-in steel corner stanchions, fully removable (can be used as a platform) * Side floor frame profiles with retractable lashing rings, recessed in V-groove * Additional lashing hooks under the load bed * Maintenance-free tandem axle assembly with independent wheel suspension * Plastic mudguards * V-drawbar with centrally mounted heavy-duty automatic jockey wheel * Multi-function rear lights and number plate protected within the rear carrier Also available in: * 2000, 2500, 2700, 3500 kg gross vehicle weight * Box lengths 4, 5, 6 m * Internal widths 180, 200, 220 cm * Various ride heights * Also available as PLATFORM WITHOUT side walls > Prices on request Various further accessories available (subject to surcharge, some shown, prices on request): * Mesh sides * High cover in various heights and colors * Sliding tarpaulin in various heights and colors * Winch, ramps loose or stowable under the load bed * Wheel chocks * Rear supports * 100 km/h version (some shown, prices on request) ! Many more trailers available at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers always in stock – visit us! * Competent and fair advice, fast processing. * Questions? Just call us!