Panel van

OPEL Movano C Kasten L2H1 3,5t Edition Navi Kamera

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Hsdpfxetcwkrs Ahzeg

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,450 mm, loading space height: 300 mm, Year of construction: 2025, ANHÄNGERWIRTZ, the online pick-up market for your new trailer, offers top brands! Over 700 new trailers in stock Over 130 used trailers constantly on offer Non-binding example: New only while stocks last! Hjdpfxepm Iwio Ahzeg Rear tipper S light 250x145x30cm 1500kg single-axle high-loader low V chassis, hand-hydraulic tilting platform with aluminum side walls 30cm foldable all around - removable, reflective strips with logo, lashing brackets in the chassis edge, automatic jockey wheel..... only available online! Many variants available immediately. Sales around the clock via our online shop at Sales by phone or by appointment on site during our opening hours. Sales opening hours: Order by phone Monday to Friday 8:00 a.m. to 12:30 p.m. and 2:00 p.m. to 6:00 p.m. or around the clock via our online shop at trailershop. Content and images are subject to copyright - logos are trademarks 03/25 2514-3-13-1563-J

Condition: used, mileage: 666,394 km, power: 309 kW (420.12 HP), first registration: 08/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Multifunction steering wheel Hedpfx Asvhukhshzog * Sleeping couch * Air conditioning * Moving floor hydraulics * Radio ----Internal vehicle number: 9832-----Errors & omissions excepted

Condition: new, maximum load weight: 7,500 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 1,475 mm, Year of construction: 2025, Equipment: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture 2025 * Total weight: 10,500 kg Hodpfxjqnrtas Ahzog * Payload: 7,500 kg * Empty weight: 3,000 kg * Overall dimensions: 6,960 x 2,550 x 1,475 * Bridge dimensions: 5,035 x 2,420 x 500 * Steel side walls: 500 mm high * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electric and compressed air connections on the drawbar * Storage shaft with 2 aluminum ramps in the chassis frame * 8 ton ramps surcharge 1,499 euros ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and testing the item so that the buyer does not have any false impressions about the condition and suitability. Viewings and testing are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, total width: 2,200 mm, total height: 1,400 mm, Year of construction: 2025, * Humbaur HTK 754020 * Three-way tipper * New vehicle * Tandem chassis * Year of manufacture: 2025 * Total weight: 7500kg * Empty weight: 1900kg * Payload: 5600kg * Overall dimensions: 6040mm x 2200mm x 1400mm * Internal dimensions: 4000mm x 2030mm x 400mm * Loading height: 920mm * Steel side walls can be folded down and removed at the sides and rear * Swinging rear side wall with central locking * Height-adjustable drawbar approx. 590mm - 930mm * Torsion spring units and parabolic suspension Hsdpfx Ajttfm Hohzsg * Integrated receiving shaft for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4mm sheet steel * 3 a few recessed lashing points * Pneumatic brake with ALB / ABV ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 6,650 kg, maximum load weight: 17,350 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6650kg, permissible total weight: 24000kg, tire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, - steel welded construction - bogie with strong ball bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - without spare wheel, - 1 plastic tool box, with shelf, w620/h360/d440mm, lockable with padlock - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks below the low loading area - wooden planks 70mm for extension to 3000mm - 1 pair of ring lashing eyes embedded in the front on the crank, 5 tons each - 7 pairs of lashing mushrooms embedded in the top and sides of the outer frame, 10 tons each - 1 x at the front on Crank, 6 x in the low bed - 5 pairs of stake pockets embedded in the outer frame, inside 70x40 mm - 2 pairs of additional folding lashing eyes, 10 ton each, 1x at the front on the crank, 1x behind the 3rd axle - Drawbar with 40 mm towing eye, and 8 inclined towing eyes - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) - 235/75 R17.5 - steel rims in twin arrangement, factory silver - 2-line compressed air brake system - spring-loaded parking brake ABS and ALB, with plug at the front, with connecting cable - 24 volt, multi-chamber lights, yellow LED lighting on the side - 2 x 7-pin, non-interchangeable plugs at the front, with connecting cable - 1 LED rotating beacon with holder, switched via parking light (light can be removed) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm - front bend with steel/checker plate covering - storage box embedded in the crossing slope to the bend - then with 70 mm softwood floor, in the wheel arch area steel/checker plate covering - rear bevel with 70 mm softwood floor - low loading area including rear bevel 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - additional ramp safety Hsdpfxot Szcbs Ahzsg

Condition: used, maximum load weight: 9,700 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 11/1999, next inspection (TÜV): 04/2024, loading space length: 4,000 mm, loading space width: 1,740 mm, loading space height: 900 mm, total width: 2,450 mm, total height: 900 mm, Unladen weight: 2,300kg Hodpfx Ahsqwdi Rozog Overall length: 5,500mm Loading length: 4,000mm Width: 2,450mm Further information - Loading width 1,740mm - Wabco compressed air tank - Large lashing package - Front support - Drop sides 40mm

Condition: new, empty load weight: 11,400 kg, maximum load weight: 36,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,100 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 6°. - Technical fifth wheel load: 18,000 kg - For SZM: 4 x 2 or 6 x 2 Loading area: - Loading area, length approx. 9,400 mm, with rear chamfer approx. 900 mm x 6°. - Loading platform after the gooseneck, can be raised and lowered hydraulically. Hodpfx Ahoiuy Npozog - Loading platform length approx. 3,000 mm. Loadable up to approx. 9,000 kg Ramps: - 1 pair of two-part hydraulic steel ramps, approx. 4,350 x 900 mm. - Hardwood decking. - Hydraulically folding ramp tips. - Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards. Axles and suspension: - BPW axles and suspension, two axles rigid, one axle self-steering. - Technical axle load: 12,000 kg - Electromagnetic reverse lock via reverse gear and manual activation. - Air suspension with lifting and lowering valve. - Axle tool. Tires: - 235/75 R 17.5 3PMSF dual tires. - Load index 143/141J (144/144F) Brake system: - WABCO EBS-E braking system in accordance with EU regulations. Lighting system: - 24-volt lighting system in "ASPÖCK-NORDIK full LED" (ASS 3) - Design in accordance with EU regulations. Metallization: - Standard HRM metallization (High Resistance Metallization) of the outer frame. - Complete steel construction shot-peened, then the defined visible surfaces metallized with - metallization with ZINACOR 850 (zinc 85% - aluminium 15%). Painting: - 6-K final treatment: - Complete steel construction shot-blasted after welding. - One coat of zinc-based primer, one coat of adhesion primer. - Final coat with 2 layers of 2-component paint (acrylic) in one color in nova grey, followed by sealing of the cavities with special wax. Rims in silver. Steel construction: - Steel construction made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder DIN-EN 287-1 tested. MAG welding process according to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Accessories included: - Steel end wall, pluggable, approx. 400 mm high. - Connection strip for supply lines to the SZM, attached at the height of the outer frame profile. - ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. 24N connection in accordance with ISO-1185 24S connection in accordance with ISO 3731 15-pin connection in accordance with ISO-12098 - 1 spare wheel with mounting adapter under the cargo bed on the right in front of the axles. - Parking position on the gooseneck for the warning signs when not in use. - Outer support of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN). - One fastening hole in the rear upper area of the outer beams of the gooseneck for a screw-in lashing ring. 1 pair of screw-in lashing rings included (LC 10,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings inside on the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of lashing rings in the middle of the gooseneck for (LC 5,000 daN). - Approx. 40 mm hardwood planking above the gooseneck. - 2" kingpin - On the gooseneck, 1 pair of plug-in aluminium side plates, approx. 400 mm high, in anodized finish. - On the gooseneck, one plug-in aluminum

Condition: new, empty load weight: 783 kg, maximum load weight: 2,193 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 900 mm, suspension: other, tire size: 195/50 r13, *++++IMMEDIATELY AVAILABLE+++* Hjdeqwz Dvepfx Ahzjg Type: 3-sided tipper Including ramps Including 60cm swinging drop sides Dimensions: L x W: 330 x 180 cm Total weight (kg):3,000 - braked double-axle trailer Loading area height (cm): Operation: electric pump Body: Drop sides - 30 cm Tires: 195/50R If you are offered the same trailer at a lower price, please present it to us !!! If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, empty load weight: 682 kg, maximum load weight: 2,318 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,490 mm, loading space width: 2,105 mm, Year of construction: 2025, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Temared Carkeeper 4521/2 S Car Transporter Passenger Car Trailer Condition: New (Year of Manufacture: 2025) Hodsucg Uvopfx Ahzsg 2 years main inspection from the date of first registration Including registration documents (vehicle registration certificate part II and COC certificate) Available from: approx. 6 weeks after receipt of order (non-binding) Financing available through our partner banks! Technical Data Gross vehicle weight: 3,000 kg Unladen weight: approx. 682 kg Payload: approx. 2,318 kg Number of axles: 2 Load compartment length: 4,490 mm Load compartment width: 2,105 mm Brake type: braked, overrun brake Chassis: high loader (wheels under platform), rubber suspension axles Electrics: 12V, 13-pin connector Tyre size: 195/55 R10C Optional Equipment None Standard Equipment Perforated track rails (VDI 2700 8.1 Certificate) Automatic jockey wheel Manual cable winch incl. bracket Tilting function via load shifting and shock absorber support Frame welded and galvanized Side perforated profile Steel loading ramps, retractable Wheel chocks Lashing rings V-drawbar AL-KO or Knott axles and braking system Accessories (at extra cost) 100 km/h certificate including retrofitting 4x shock absorbers (minimum unladen weight of towing vehicle: 2,727 kg) Aluminum loading ramps Aluminum floor plates between track rails Aluminum and phenolic plywood floor plates between track rails Aluminum side walls 30 cm Installation of aluminum side walls Trailer lock LED lighting Wheel stopper Wheel stopper bar Spare wheel 195/55 R10C incl. bracket Phenolic plywood floor plates between track rails Lashing strap Nationwide vehicle delivery in Germany (individual transport rate on request) Registration within a 25 km radius (carried out by Autohaus Möller) Nationwide registration (carried out by registration service) Export plates (valid for 15 days) Export plates (valid for 30 days) Temporary registration plates (valid for 5 days) Customs clearance Sending vehicle documents for registration purposes (down payment required) Note The images show optional equipment subject to an extra charge...