Van

Kubota ME5700 Allrad mit Industriefrontlader

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Rated power: 80 HP Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Fodpfx Aeyv S Ulsa Espk Location: not specified

Condition: used, Year of construction: 1999, Payload: 19,990 kg Gross vehicle weight: 8,010 kg Front tire condition: 70% Rear tire condition: 70% Fedsutw I Nspfx Aa Eopk Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) Fpsdpjrgzv Njfx Aa Eok * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 2009, Massey Ferguson 5475 Dyna-4 with Hydrac EK 2500XL Year of make 2009 Transmission Dyna-4, partial power shift 16-16 Engine Perkins 135 HP Max speed 40km/h Tires dimensions rear: 600/65 R38, front 480/65 R28 Weight 5400 kg Height 2790mm/279cm Width 2010mm/201cm Lenght 4810mm/481cm Pto 540/1000 3 pairs of hydraulic quick hitches Fodpfx Asw T R Eioa Ejpk Trailer hydraulic brakes hitch Trailer lights plugin Gramer trailer attachment Hydrac EK 2500XL front loader Hydraulic pump flow 110 l/min

Condition: used, Year of construction: 1998, operating hours: 7,950 h, Equipment: all wheel drive, MF Femtec 860 B backhoe loader from municipal ownership, always regularly serviced. 70 KW 95 HP Rear excavator can be moved sideways with telescopic extension bucket Accessories: 60 cm and 30 cm trench bucket 1.6 m trench cleaning bucket plus triangular trench cleaning bucket 4/1 folding bucket at the front with teeth Tires 70% 4 gears torque converter Reversing gear on the steering column All-wheel drive Diff lock Swivel seat Opening window Perkins 4 cylinder turbo engine Vehicle is in good condition and ready for use. VAT not deductible----Tel.: E-mail: josef. Location: 97778 Fellen/Rengersbrunn Fjdpov A Dgzefx Aa Eopk

Condition: new, functionality: fully functional, overall weight: 26,000 kg, Year of construction: 2026, warranty duration: 36 months, Equipment: crane, cruise control, parking heater, seat heater, trailer coupling, DAF XF 530 FAT with front crane Fassi F255 A, leading axle, valid until 2026! Fpjdpfx Aajx Ekdds Eek

Condition: used, Year of construction: 2024, PTO Walterscheid side mulcher MB 220R PROFI LW / Fjdpfjtqug Tox Aa Espk

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Fpjdpfx Aevw Hmtsa Ejk Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: used, Year of construction: 2024, 710/50R26.5 Alliance 885 Double-sided, wide-angle GW size 6 / compost attachment 400 mm Surcharge 3rd ripper roller screw-on tines for 3 ripper / rollers Hydraulic undercarriage Bottom hitch with ball head drawbar / scraper bars for lime sideboard coupling Fedpfx Ajrxuqzsa Ejpk

Condition: used, Year of construction: 2023, ZW Walterscheid W2480-SD25.196 / Fodpfxst R R Tme Aa Eepk