Swap chassis trailer

SCHWARZMÜLLER 2-A BDF 1,22/1,32 ALCOA Alufelgen ADR 120tkm TÜV

WhatsApp

SCHWARZMÜLLER 2-AXLE BDF TRAILER CHASSIS
German vehicle 1st hand.
Mileage original approx. 120,000 km !!!!
Weights
Total weight (permissible) 18 t
Unladen weight approx. 2600 kg (+/- DIN tolerance)
Product number / world manufacturer number
396346 = VAVSAZ218HD396346
Truck superstructure approx. 350 mm
Truck coupling height unloaded approx. 830 mm
Weights
Total weight (permissible) 18 t
Total weight (technical) 18 t
Dimensions
Overall width max. 2,550 mm
Underride parking height 1,220 mm and 1,320 mm on level ground
Loading height/top edge of frame unloaded
- in driving position approx. 1,260 mm
- lowered approx. 1,180 mm
- raised approx. 1,400 mm
Frame Welded steel frame construction
Frame height at front approx. 100 mm
2 outriggers with container locks according to EN284 (20ft locking dimension) for:
1 x C715 swap body approx. flush with the rear or
1 x swap body C745
Standard bogie
Low-maintenance ball race
Front stop support, reversible, for body length C715 and C745 (for C715 with larger cab spacing)
4 guide rollers. Fit the rear pair approx. 1.46 m from the rear end of the frame, towards the center of the vehicle
Extendable drawbar, 6 x 100 mm adjustable, with DIN drawbar eye 40 mm,
Silent bushing bearing, mechanical Getofix fork lock (regardless of the legal
legal total drawbar length and intermediate distance)
Truck coupling height from 840 mm to 1,040 mm
Towing length 1,800 - 2,400 mm
SAF Intradisc B9 axles with disc brakes ø430 mm (22.5" disc),
Load capacity 9 t/axle, on-road version
4 tires 385/65 R 22.5, 160J, make FULDA Ecotonn
4 Alcoa aluminum rims 11.75 x 22.5, offset 120 mm, DuraBright EVO
Brake system in accordance with EC directives 71/320 and ECE R13 Dual-circuit air brake system
Wabco brake system
EBS system 4S3M, 1st + 2nd axle sensed
RSS - Stability program
Spring-applied parking brake on 2nd axle
Aluminum air reservoir
Brake/air connection lines with Quattromatic quick-release coupling
EBS/ABS connection cable
Air suspension with lifting and lowering device, total lift approx. 220 mm,
Can be operated separately at the front and rear
Automatic adjustment to programmed ride height from 15 km/h
Quick exhaust valves on all axles
Axle load indicator via EBS Canbus signal for display in the cab
Lighting/electrics
24-volt lighting system in accordance with EC Directives 76/756/EEC
2 pcs. Partial LED five-chamber tail lights "Europoint III"
Fpjdpfjvdlw Rsx Aaxep
2 pcs. LED position lights at the front
2 pcs. LED clearance lights rear
LED side marker lights
2 pcs. License plate lights
Fixed connection cable with 1 x 15-pin plug
2 additional LED reversing lights
Paintwork Steel granulate cleaning, 2-layer zinc phosphate primer,
Spray painting with 2-component commercial vehicle acrylic paint
Chassis, boom = RAL 7021 black-grey
Powder-coated wheel hubs, black = powder-coated
Side collision protection, black = powder-coated
Drawbar/ drawbar tube = painted black (RAL 9005 deep black)
Plastic parts black, unpainted
Powder-coated attachment/installation parts black
Hot-dip galvanized attachment/installation parts unpainted
Reflective contour marking strip in white/red, in accordance with ECE 48
2 pairs of plastic single wheel mudguards with splash guard
Aluminum underride guard, coated white
1 wheel chock, with bracket
"Schwarzmüller" rubber apron with bar hinge
1 plastic toolbox 830x500x470 mm (WxHxD outside)

The listing was translated automatically. Translation errors are possible.