Forest harvester

Ponsse Ergo 8W

Condition: used, Year of construction: 2014, operating hours: 2,650 h, power: 316 kW (429.64 HP), maximum speed: 30 km/h, working width: 910 mm, Equipment: air conditioning, cabin, crop cutter, onboard computer, Operating hours: 2,650; Drum/rotor hours: 1,420; slope compensation; hydrostatic drive; header: PremiumFlow 630G2 header from model year 2016 with transport trailer. Engine: John Deere 6-cylinder 9.0 L engine with 317 kW (approx. 431 hp). Driving speed: 30 km/h. Grain tank capacity: 10,600 liters. Rotor: diameter 762 mm. Discharge speed: approx. 110 liters/second. Fuel tank: 950 liters. Features: Cabin: premium cab with large display, air conditioning, and radio with hands-free system. AutoContour: automatic header ground adaptation. GPS: includes yield and moisture measurement. On-board computer: monitoring of all key machine parameters. Throughput control: optimization of harvesting performance. Loss measurement: minimization of harvest losses. Hectare counter: area monitoring. Reversing device: rapid clearing of blockages. Pendulum leveling: stability on uneven terrain. Straw chopper: premium chopper with 100 knives and radial distributor. Location: customer. Redjwgpf Ajpfx Abzjp

Condition: used, Year of construction: 2007, operating hours: 26,500 h, power: 112 kW (152.28 HP), Equipment: air conditioning, all wheel drive, cabin, parking heater, Forwarder Preus 8110, 8x8, single owner, ex-state forestry. Equipped with Palfinger Epsilon crane F 101, 10 m reach, with tilt system. Two travel speeds, switchable all-wheel drive, differential locks, bogie axles. Deutz diesel engine, hydrostatic drive, sliding headboard, extendable bolster rack. Features include air conditioning, auxiliary heater, comfort rotating seat with joystick for drive, steering & crane control, and rearview camera. Rodpfxsw Ii Aie Abzjp The machine is ready for immediate use, has always been regularly serviced, and works flawlessly. Crane, drive, and engine are in good condition. Travel pump, drive motor, and crane pump were renewed/overhauled at approximately 15,000 operating hours. The joint articulation has already been relagged. Telescope slides/bearings with hoses have already been renewed. Rear tires approx. 80%, front approx. 40%. No oil leaks. Year of manufacture: 11/2006, first commissioning: 01/2007. EC Certificate/Data sheet available. VAT 19% deductible.

Condition: used, mileage: 110,769 km, power: 96 kW (130.52 HP), first registration: 04/2001, overall weight: 5,600 kg, fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro1, loading space width: 2,100 mm, loading space length: 3,450 mm, loading space height: 390 mm, total length: 6,330 mm, total width: 2,180 mm, total height: 2,450 mm, number of seats: 3, Equipment: ABS, crane, Equipment: * Body/Superstructure: Flatbed with crane * Harms bodywork construction * Flatbed with aluminum drop sides * Bed dimensions: 3,450 mm x 2,100 mm x 390 mm * Tow bar with Varioblock Crane: * Palfinger PK 2.800 A * Year of manufacture: 2000 * Engine-driven PTO (power take-off) * 2-point outriggers Reach/Lifting Capacity: * 3.15 m = 830 kg * 4.35 m = 600 kg * 5.60 m = 460 kg Other: * Former VW IAA exhibition vehicle * 2 previous owners (1x VW) * German first delivery * Engine: 2.8 L – 96 kW * Payload: 2,495 kg Since 1972, your reliable partner for all things automotive and commercial vehicles, located in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the fields of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with a tailored offer! Trade-ins of your commercial vehicle or construction machinery are welcome. Rodsxvnq Tjpfx Abzsp If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offers generally do NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at an additional cost. The information given in advertisements, online listings, price tags, and images represents non-binding descriptions and does not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to error and prior sale.

Condition: new, Year of construction: 2025, Equipment: hydraulics, --direct available-- Rsdpfx Asqktg Hobzjp Factory NEW ! 360° endless rotation Full 12x months Original Westtech factory guaranty Limited time only! Westtech WOODCRACKER T4000 hydraulic telescopic stage with CS510 crane saw - NEW / unused / has never worked before - year 2025 - range up to 6350 mm - working weight 680 kg - telescope version double - hydraulic hoses inside - for any excavator from 14 - 22 t to increase the reach - for any attachments possible (e.g. wood tongs, grab saw, shell grab, ...) - 1x CS tool set - for free Special price on request ID-No. 2014 Different versions & different adapter plates available. We deliver the complete Westtech WOODCRACKER program, direct available, on stock ! We are official Westtech WOODCRACKER sales & service partner. We are official Dieci sales & service partner. We are official MAGNI sales & service partner. For any questions and help, please contact us at any time. The machine is in our stock to visit at any time. The machine has CE certificate and documents.

Condition: new, Year of construction: 2025, machine/vehicle number: CS510 crane, Factory NEW ! Hydraulic block for crane / autotilt function for crane. If there is only 1 DW connection on the carrier vehicle. Full 12x months Original Westtech factory guaranty --direct available-- Limited time only! Westtech WOODCRACKER CS510 crane gripper saw - NEW / unused / has never worked before - year 2025 - fits on any crane instead of the existing gripper - with lockable tilt function, so it can be used as a wood gripper - only one double-acting hydraulic connection is required - large cutting diameter although the low own weight - automatic chain adjuster - cutting diameter 54 cm - gripper opening width 1,27 m - powerful 3-finger-gripper - chain lubrication saw oil - 2x units extra saw bar - for free - 4x units saw chain - for free - 1x CS tool set - for free Rsdpfxeqkccce Abzep - KTL primed, powder top coat - machine made of high-strength Hardox ® steel Special price on request ID-No. 2052 Different versions & different adapter plates available. We deliver the complete Westtech WOODCRACKER program, direct available, on stock ! We are official Westtech WOODCRACKER sales & service partner. We are official Dieci sales & service partner. We are official MAGNI sales & service partner. For any questions and help, please contact us at any time.

Condition: used, Westtech Woodcracker CS510 Crane Grapple saw for cardanic mounting Immediately available Features: - Cutting diameter: 540 mm - Grapple opening width: 1,270 mm - Own weight (base with full equipment): 360–400 kg - Recommended hydraulic flow: 50–110 l/min - Recommended operating pressure: 200–280 bar - Saw chain lubrication: Oil We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Rsdeyfu Eqjpfx Abzop We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Please contact Marius Herden for more information.

Condition: used, machine/vehicle number: YV2AG20C3DA73xxxx, mileage: 330,000 km, Year of construction: 2013, Please provide reference number upon request: 22255 Specifications: Mileage: 330,000 km Transmission: Automatic Retarder Euro 5, 469 hp New/other tires will be fitted before sale Full steel suspension 6x2 Trailer hitch VBG coupling Reversing camera Sleeper cab Plenty of storage space Radio/CD Climate control / AC Rjdpfxsyh T Hce Abzep Service history Ready for delivery Description:2013 Volvo FH460 6x2 asphalt truck.The truck is ready for delivery.The current tires will be replaced before sale. Km: 330000 HK: 469 Technical approved: Yes EU-approved until: 01.04.2026 Own weight: 14070 Total Weight: 28000 Payload: 13855 Width: 255 Length: 760 Euro: 5 Model: FH460 6x2 Asfaltbil – Eu-godkjent – 330 000 km. Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, mileage: 176,725 km, power: 250 kW (339.91 HP), first registration: 09/2011, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, * MAN TGM 32.340 * Roll-off tipper with Marchesi M11500F crane * Lifting capacities: * 2.0 m = 4,500 kg * 4.0 m = 2,500 kg * 5.5 m = 1,800 kg * 7.2 m = 1,400 kg * 8.0 m = 1,100 kg * Hyva roll-off system * Gross vehicle weight: 32,000 kg * Unladen weight: 14,180 kg * Payload: 17,820 kg * Axle configuration: 8x4 * Tires: see photos * Air conditioning * Immediately available * Subject to prior sale and errors We offer: Net purchase available for EU companies with valid VAT number and for non-EU customers. Leasing and financing options. Processing of all customs formalities. Provision of temporary and export license plates. Transport to port available. Rjdpfx Absyg Avaszjp All prices advertised are gross and include 19% VAT.

Condition: like new (used), functionality: fully functional, mileage: 550,000 km, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, onboard computer, power mirror, soot filter, traction control, trailer coupling, truck registration, MERCEDES ANTOS 2745, year 2017, 550,000 km, Euro 6, towable, hub reduction, wheelbase 4600 mm, Palfinger hooklift with slewing function. Rsdpfxjyaxyne Abzsp

Condition: used, Year of construction: 2006, operating hours: 21,732 h, power: 210 kW (285.52 HP), Equipment: all wheel drive, The PONSSE H6 harvester head is ideally suited for a wide range of tasks involving the processing of medium-diameter logs. Key features include: maximum opening (feed rollers) 600 mm, felling diameter 640 mm, three feed rollers, all-rounder machine, feed force 25 kN, feed speed 6 m/s, weight (without rotator) 1,050 kg, hydraulic chainsaw – saw bar length 750 mm, cutting diameter 640 mm, chain speed: 40 m/s, chain: 0.404" / 3/4", power output 45 kW, measuring and control system: OPTI, drive: hydrostatic-mechanical, hydraulic oil replenishment pump, vacuum pump, fuel pump, ground clearance: 600 mm, LED lighting, crane, 2x hydraulic extensions, reach approx. 10 m, working lights, air conditioning, WEBASTO auxiliary heater, "Pioneer" radio CD player, heated windscreen, operating hours: 21,732 (4,550.8 driving hours, 12,428 crane hours), battery master switch. The machine may display advertising stickers and/or lettering. Rodpfx Ajwmik Eobzop SI85584 Our offer is generally made without a new TÜV inspection. Should you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops! The vehicle may display advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this machine. Please contact us!