Special purpose truck

UNIMOG Unimog U219

Mercedes-Benz Unimog U219----Internal No.:
Internal No.:
Vehicle data:
Mercedes Benz Unimog
Type: U219
Mileage: 20,043 km
Equipment:
* Paint 2603 deep orange
* Tires 315/80 R 22.5# TL Regio drive "L"
* Axle ratio i = 6.527
* Differential lock on front axle
* Trailer brake, 2-line
* Attachment fittings, rear
* Wheelbase 2800 mm
* Front attachment plate DIN76060, type B, size 3
* VarioPilot (right/left alternating steering)
* Protective device, side
Fpedpfsuy R Hyox Afmjp
* Air-suspended suspension seat, passenger
* Air-suspended suspension seat, with seat heating, driver
* Additional steering column switch, left bracket, universal, for control panel
* Air conditioning
* Activated carbon filter
* Permanent power sockets 12V (C3), 12V and 24V middle power
* On-board socket 24V/25A in the cab, with C3 signal
* Rearview camera
* Generator 28 V / 150 A
* ABS trailer socket 24V, 7-pin / 5-pin
* Front socket 24V, 7-pin
* Sun visor outside, transparent
* EasyDrive Automatic Shift (EAS)
* Hydraulics for tipping device
* age, 2-circuit, 2-cell, full prop, snow plow exhaust
* Hydraulic plug connection, rear, 4-way, cell 1+2
* Pressure line rear, 2nd hydraulic circuit
* Separate return line rear
* Instrument cluster, 12.7 cm, with video function
* Digital tachograph, 2nd generation, ADR
* Tachograph manufacturer VDO
* Pre-installation, warning light for telescopic cylinder
* Radio, with USB connection and Bluetooth pre-installation
* for Truck Data Center 6 (FB Card)
* AdBlue tank 16 l additional headlight, height adjustable, A-pillar
* Tripod, left and right for rotating beacon
* Engine OM934, R4, 5.1 l, 140 kW (190 HP), 750 Nm
* High Performance Engine Brake
* Engine PTO output including front PTO
* PTO speed limiter
* Trailer coupling, large jaw, ring nut, bolt 38.5
* Steep shoulder rims 9.00x22.5
* Warning stripes red/white, retroreflective
* Weight variant additional 10.0 t

* Dücker boom UNA 450 for front mounting in the DIN vehicle plate size. 3 or 5, including sliding frame Working area: right, left and in front of the vehicle, working width from the center of the vehicle with mowing head 5.40 m, without drive and control

* Electro-hydraulic proportional CAN bus control, including integrated display for operating and displaying all required functions. Setting and reading operating and diagnostic pages with Danfoss joystick (roller joystick)

* Drive for working equipment, integrated in the basic device Drive via front PTO. An axial piston high-pressure pump with an output of 47 ltr./min is installed - 320 bar pressure at PTO input speed 650 rpm including universal joint, front PTO position at the top off-center

* Counterweight "spreader version" suitable for the Unimog attachment fittings - weight mounted below behind the axle - (from 1,800 kg including support for the cross-connection carrier)

* Counterweight 650 kg "spreader version" with recess for spreading disc dimensions: 1150 x 730 x 140 mm

* Flail mower head VMS 1200 for UNA working width 1.23 m, right-hand working, drive on the left side with high-pressure hydraulic motor, including toothed belt drive, can be converted from right-hand working to left-hand working, maintenance-free feeler roller. The mower head is equipped with a replaceable plastic wear cover. A support tube adjustable across the entire width with an additional support is mounted. Equipped with flat flail 945 000 900

* Dücker torsion frame TR hydraulically lockable from the cab to prevent vehicle twisting (for Unimog) Central lubri

The listing was translated automatically. Translation errors are possible.