Telescopic handler

Manitou MT933 EASY 75D ST5 S1 Valid inspection, *Guarantee

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 9,070 mm, Year of construction: 2024, operating hours: 141 h, Unladen weight: 7,320 kg Ltedpfoutwitsx Ahzea Engine brand: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000V01125256 Condition of front tyres: 100% Condition of rear tyres: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m For further information, please contact PFEIFER GROUP.

Condition: new, functionality: fully functional, empty load weight: 1,180 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space volume: 1.5 m³, Year of construction: 2024, Basic standard equipment Standard models always in stock Vacuum suction drum STS VR-1.5 Rear skip 1.500l Tank - Container 1,500 liter capacity - Back tipper with wired remote control - Hot-dip galvanized container - Container tilted slightly backwards for better cleaning - Side flushing opening in the container to remove dirt or blockages without opening the container lid - Container lid opens completely to the passenger side and is secured with hook bolts - 2 safety stages fitted as standard to prevent damage to the compressor - Syphon separator - Overflow with 2 balls and sight glass - Pressure gauge on oversuction set with protective bracket - Mechanical fill level indicator with color scale Motor and compressor - MEC 3000 vacuum compressor with 3,500 liters air capacity - Vacuum max. -0.8bar (continuous operation at -0.5bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - B&S industrial motor Vanguard 13 hp - Electric starter, oil sensor, control panel with ignition lock, battery and tank - Internal intake hose to avoid protection in the motor unit - Silencer for vacuum compressor with oil catcher - Stainless steel heat deflector plate over the exhaust - 1 liter biodegradable compressor oil stored in oil bottle holder - 5 liter petrol can in holder - Standard funnel with long neck for changing and refilling engine oil - All engine components and accessories stored in lockable engine box Chassis - Self-supporting chassis, fully hot-dip galvanized - Low loader tandem chassis 2.7t - Track width identical to passenger car and Sprinter for optimum driving - lowest possible center of gravity of the suction drum - 2x axles with a load capacity of 1,350 kg each and independent wheel suspension from a well-known manufacturer - Continuous welded V-drawbar - Sturdy mudguards with metal lamp housing - Stake holders for quick securing of the suction hoses using rubber bands - Storage option for tools and accessories between the engine housing and suction drum Lodpeutcq Asfx Ahzota - Overrun brake with Rückmatic - Automatically securing ball coupling - Reinforced support wheel - 13-pin cable connection Connections and hoses - 2x suction hoses (3") 5m long with Perrot couplings - 1x suction lance 3" (1500mm long) - 1x Perrot connection (3") in the container lid at the bottom - 1x Perrot connection (3") on the right side in the direction of travel If you are looking for something other than this device, please do not hesitate to contact us directly. Our own vehicle construction leaves almost nothing to be desired. For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT from us. Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is exclusively subject to our terms and conditions and under exclusion of any warranty.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 9,070 mm, Year of construction: 2024, Unladen weight: 7,320 kg Ltsdpfxoutw Ngo Ahzea Engine make: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000V01124821 Front tyre condition: 100% Rear tyre condition: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Please contact PFEIFER GROUP for further information.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, lifting height: 9,070 mm, Year of construction: 2024, operating hours: 245 h, Unladen weight: 7,320 kg Engine make: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000C01124485 Front tire condition: 100% Ltsdjuty Eqopfx Ahzsa Rear tire condition: 100% Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m For further information, please contact PFEIFER GROUP.

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations Ltsdpfx Ahsw Tpqwezea - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: used, Year of construction: 2024, load capacity: 4,000 kg, lifting height: 13,530 mm, fuel type: diesel, construction height: 2,450 mm, power: 75 kW (101.97 HP), tire condition: 50 %, front tire size: 400/80-24, rear tire size: 400/80-24, color: other, Special equipment: 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, special equipment description: overhead guard, 3rd + 4th control circuit, 2 LED front working lights, 2 LED rear working lights, rear license plate illumination, rear socket, interior rear-view mirror, radio, diesel pre-heater, negative brake, Easy Link Standard module, working platform preparation, TÜV preparation 20 km/h Ltsdpsvi R Huefx Ahzsa

Condition: used, machine/vehicle number: MAN00000C01086062, Year of construction: 2022, operating hours: 815 h, lifting height: 3,700 mm, fuel type: diesel, power: 37 kW (50.31 HP), motor manufacturer: Kubota, gearing type: hydrostat, Lifting capacity: 2,500 kg Lodpouww H Uefx Ahzeta Overall height: 209 cm Front tire condition: 0 Rear tire condition: 0 Transport dimensions (L x W x H): 4.19 x 1.45 x 2.08 m Please contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2020, operating hours: 2,400 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), tire condition: 100 %, front tire size: AS 340 -80 R18 XMCL, rear tire size: AS 18-22.5 163A8 MPT-, empty load weight: 7,760 kg, total length: 3,755 mm, color: other, Attachments: sideshift, special equipment: 3rd valve, 4th valve, full cab, full free lift, CE certificate, Lodovggigspfx Ahzeta

Condition: used, Year of construction: 2018, operating hours: 933 h, load capacity: 3,500 kg, lifting height: 11,050 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, power: 55.4 kW (75.32 HP), motor manufacturer: DEUTZ, fork carriage width: 1,120 mm, fork length: 1,200 mm, tire condition: 98 %, total height: 2,420 mm, total length: 6,550 mm, total width: 2,350 mm, color: red, tire size: 15.5 / 80 - 24, Equipment: adjustable boom, all wheel drive, cabin, lighting, pallet forks, trailer coupling, Off-road telescopic arm forklift MANITOU, type: MT 1135 ST3B TURBO 4x4x4, first use: 2019, LIFTING FORCE: 3,500 kg, LIFTING HEIGHT: 11.05 m, LOADING FORKS (fork length: 1.200 mm / pick-up width: 1,120 mm), LOAD PROTECTION GRID, QUICK SWITCH, 4-cylinder DEUTZ TURBO diesel engine (type: TD 3.6 L4 - 75.34 hp / 55.40 kW at 2.200 rpm), ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, hydraulic outriggers (2x), OVERLOAD WARNING DEVICE, large cab, CPB, KAB - comfort seat, ROPS / FOPS, trailer coupling, traffic lights, WARNING LIGHTS / WARNING SOUND, exterior mirrors (4x), windshield wipers (2x), heating / ventilation. Tires: Off-road tires (15.5/80-24) - approx. 98 % all-round. Transport dimensions: Length: approx. 6,550 mm (approx. 5,370 mm without forks), width: approx. 2,350 mm, height: approx. 2,420 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 1135 ST3B TURBO 4x4x4, first use: 2019, LIFTING FORCE: 3.500 kg, LIFTING HEIGHT: 11.05 m, FORKS (fork length: 1.200 mm / width admission: 1.120 mm), PROTECTION LOAD GUARD, QUICK CHANGER, 4-cylinder DEUTZ TURBO-diesel engine (type: TD 3.6 L4 - 75.34 PS / 55.40 kW at 2.200 RPM), 4-WHEEL-DRIVE (4WD) and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x), OVERLOAD PROTECTION SYSTEM, big driverhouse, CPB, KAB-comfortseat, ROPS / FOPS, follower coupling, road lightings, WARNING LIGHT / WARNING RING, back view mirror (4x), windshield wiper (2x), heating / ventialtion. Tyres: ROUGH TERRAIN TYRES (15.5/80-24) - all around 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET-AMOUNT NEEDS TO BE PAID (!) ∗∗∗∗ © pb Ltedsu Dkf Rspfx Ahzoa

Condition: new, machine/vehicle number: 14263, Year of construction: 2024, operating hours: 18 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,200 mm, construction height: 2,070 mm, front tire size: 12,5/80-18, rear tire size: 27x10-12, overall weight: 4,460 kg, enginetype: Diesel, manufacturer: Manitou Ljdpfx Aew Ayxlehzota