Car carrier trailer

TEMA Temared Car Flat 3518 U 1,8t Autotransporter Si...

Condition: new, empty load weight: 350 kg, maximum load weight: 1,150 kg, overall weight: 1,500 kg, loading space length: 3,500 mm, loading space height: 1,850 mm, tire size: 195/50r13c, Car trailer from trailer manufacturer TEMARED, model CAR FLAT 3518U 1500. A tilting car transport trailer suitable for small vehicles. The standard equipment of the car transporter includes a tilting function with weight distribution, lashing eyes, support wheel, galvanized frame, and V-shaped drawbar. Technical data for this trailer can be found below. For this car trailer for car transport, you can also get accessories such as a spare wheel, toolbox, car lashing straps, lashing straps, and an anti-theft device. --- You can find all our cost-effective offers on our website. Germany-wide delivery possible (except for islands)! Please ask us about the prices. --- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Collection times: Monday - Friday – [time] Collection is not possible on Saturdays! Kjdeh Ec T Uspfx Agqjnc

Condition: new, maximum load weight: 549 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,500 mm, loading space width: 1,420 mm, loading space height: 350 mm, loading space volume: 1.4 m³, color: other, construction height: 960 mm, working width: 1,490 mm, Manufacturer: Brenderup Type: Brenderup 3251T, 3251ST UB flatbed trailer, steel Permissible total weight: 750 kg, tandem axle, unbraked Payload: 549 kg Unladen weight: 201 kg Box dimensions: 2500 x 1420 x 350 mm Tires: 10 inches Loading height: 610 mm All side panels can be removed and folded down Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn and Neptun Upon request, we will provide you with a free temporary registration plate for transport. We repair trailers from all manufacturers. Further accessories available upon request. Subject to technical changes, price changes and errors. Kedpfx Aged T Szujqenc No liability is accepted for errors and printing errors. Rubber spring axle, support wheel, hot-dip galvanized, unbraked, including warranty. Brenderup uses galvanized components that optimally protect the trailer against rust. User-friendly latches, the tarpaulin buttons are attached to the trailer as standard. V-shaped drawbar, 4 x internally mounted lashing eyes, 13-pole plug with reversing light.

Condition: used, Year of construction: 1990, operating hours: 9,832 h, = Additional options and accessories = - EBS = More information = Empty weight: 5.000 kg Knjdpoxt Spbofx Agqec Selling price: € 8.999, US$ 10.380 Purchase on credit is possible: Yes

Condition: used, tire size: -, Year of construction: 2007, operating hours: 5,800 h, Equipment: cabin, ref: 7885 Knedpfxevyk Tvs Agqec 1725 mm balancer Blade Single and double acting circuit Servo hydraulic control (ISO/SAE)

Condition: used, Year of construction: 1993, operating hours: 4,630 h, Equipment: all wheel drive, In good condition, but the chain is not functional! Kedpfsk E D Emjx Agqjnc All information provided is without guarantee! Location: 5662 Hauserdorf, Bacherstr. 1

Condition: new, functionality: fully functional, machine/vehicle number: GN131, empty load weight: 314 kg, maximum load weight: 968 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Equipment: uploader, Sideboards, railings, and more - Sideboards made of galvanized sheet steel, 40 cm high, double-walled - with tension locks - sideboards that can be folded down and removed on all sides - corner posts inserted - quick conversion to a platform trailer - stable and durable hinges Attachment option for tarpaulins and nets - mounted attachment buttons for securing tarpaulins and nets Chassis and frame - tow ball coupling with safety indicator - partially hot-dip galvanized - bolted chassis with V-drawbar - frame with two continuous U-profiled longitudinal beams and two cross members Loading platform and floor - continuous, non-slip, and waterproof screen-printed wood floor - 12mm thick Lighting - modern multi-function lighting - with reversing light - with rear fog light - 13-pin connector Wheels and axles - robust rubber spring axle - with automatic reversing function - maintenance-free compact wheel bearings - with plastic fenders - chocks with holder Kedpsh Ewzhofx Agqonc Lashing and securing options - 6 recessed lashing eyes, integrated into the frame on the loading platform Documents and shipping costs - shipping costs to us already included - incl. vehicle registration certificate (Part 2) - incl. COC document (EC certificate of conformity) - no further unwanted costs - weight reduction possible for an extra charge (pure TÜV fee) You can find more offers and information on our website. I am not allowed to provide a direct link, so simply enter "Dapper Anhänger" in your search engine. Photos may show optional accessories. Subject to errors, changes, and prior sale.

Condition: used, mileage: 114,000 km, power: 48 kW (65.26 HP), number of beds: 2, fuel type: diesel, gearing type: mechanical, color: white, first registration: 07/1982, total length: 4,870 mm, total width: 1,975 mm, total height: 2,550 mm, overall weight: 2,550 kg, Mercedes-Benz 207 D with the original “Orbis” conversion! Kodpfx Agjzz Iwkoqjnc H-registration (for classic vehicles) is available. The vehicle is from its first owner and was only registered to Daimler for an additional week. The original registration document is available!!!! * Radio * Rear kitchenette with a 2-burner stove * Sink * Refrigerator * Roof hatch * Cabinets The vehicle has been deregistered since 2020!! * The information provided online is a non-binding description based on the chassis number. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors / mistakes. Please verify the accuracy of the equipment features directly on the vehicle before purchase. Subject to prior sale.

Condition: new, maximum load weight: 1,438 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, loading space height: 420 mm, total width: 2,400 mm, total height: 640 mm, Year of construction: 2026, TEMARED Car Transport Trailer Type Car Flat 3518 1,800 kg Gross Vehicle Weight, Payload up to 1,418 kg Shock absorbers for 100 km/h approval? Tilting platform, center area with phenolic resin-coated plywood insert Important Safety Notice Dear customers, We must point out that fraudsters are copying our vehicle listings from our official website and eBay Classifieds, and are offering them on other fraudulent websites at significantly lower prices. Please note: Our advertisements are valid exclusively on the official platforms of our website and eBay Classifieds. Any reposting or listing on other portals is a scam and serves fraudulent purposes. To protect our vehicles from misuse, we do not publish all detailed information in our advertisements. Full information is available only through direct contact with us. If you are seriously interested, we kindly ask you to contact us directly by email or telephone. Thank you for your understanding. Available immediately! Financing available! Delivery possible for an extra charge! Brand new trailer 2 years MOT on first registration, 2 years manufacturer's warranty Specifications: Hot-dip galvanized bolted steel frame Ksdpfx Aoxcdlyegqenc Side wall height Steel loading ramps Central floor area covered with phenolic resin-coated plywood 4 pairs of recessed lashing eyes in the floor Tilting platform operated by gas strut Bolted, adjustable wheel chocks Maintenance-free rubber-sprung KNOTT axle 1,800 kg 195/50 R13C tyres on steel rims Shock absorbers for 100 km/h approval Plastic mudguards Hot-dip galvanized V-drawbar KNOTT overrun brake with reverse function, handbrake Jockey wheel 12V lighting system, 13-pin plug Multifunctional lighting Front position lights White/red marker lights at rear 2 wheel chocks with holder Registration documents (registration certificate, COC, 100 km/h manufacturer certificate) The above-mentioned equipment is included in the price. Dimensions: Loading area: 353 x 184 cm (LxW) Deck height: 42 cm Overall length: 548 cm Overall width: 240 cm Overall height: 64 cm Gross weight: 1,800 kg Unladen weight: 382 kg Payload: up to 1,418 kg (depending on equipment) Axle load: 1,800 kg Drawbar load: 100 kg Options Available: Spare wheel with holder + EUR 180.00 Lifting crank + EUR 90.00 Trailer available immediately. Financing on request! Delivery possible for an extra charge! Visit us or call us. Offer price incl. 19% VAT. Inspection Mon-Fri 09:00 - 17:00 Saturday 09:00 - 12:00 Offer and further information on request: Office Tel. Subject to prior sale and errors. The provisions of the order confirmation or purchase contract alone are binding. Detailed specification and pricing are available from our sales staff. Please contact us. Please observe the legal regulations regarding weight and speed restrictions.

Condition: used, Year of construction: 2007, Empty weight: 950 kg Carrying capacity: 2.550 kg GVW: 3.500 kg Kedpfx Agjyzknnsqonc VAT/margin: VAT qualifying

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Kjdpfji Ai E Rox Agqjnc Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)