Mower

Pöttinger Novacat V10

Condition: used, Year of construction: 2000, operating hours: 11,300 h, power: 93 kW (126.44 HP), Equipment: air conditioning, Deutz tractor MK3 120 Agrotron 120hp Predpsvzlx Nsfx Adhob Year 2000 std 11300 Rear tires as good as new New TÜV 50km/h version can also be reduced to 40kmh

Condition: used, Year of construction: 2008, Quick blade change / Pedpfxjt A Smxo Adhorb

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Prsdpfx Asmfqi Ijdhob Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: used, Year of construction: 2009, operating hours: 5,377 h, power: 597 kW (811.69 HP), Equipment: air conditioning, all wheel drive, cabin, JOHN DEERE 7950i ProDrive VIN: Z07950Y510262 Prsdpfx Asx Hmt Rsdhob Year of manufacture: 2009 - First registration: 18/05/2009 Engine hours: 5,377 h - Drum hours: 3,023 h Automatic climate control GPS steering system preparation Radio-USB Heated seat Rear view camera 40 km/h Central lubrication system Automatic hitch Maize header Type 195-390-JD78 with transport axle PickUp Type 630 B Rear tyres 600/65 R28 tread: approx. 80% - 52 mm Front tyres 800/65 R32 tread: approx. 60% - 32 mm Subject to change, prior sale, and errors. The description serves solely for general identification of the vehicle and does not constitute a warranty in the sense of commercial law. The specification in the purchase contract is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! Vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, Year of construction: 2008, DISCO 3100 F PROFIL, used Claas front mower in series, PTO shaft, mechanical suspension Pjdpfox R Iphex Adhsrb

Condition: used, Year of construction: 2013, DISCO 3900 CONTOUR 010 Used Claas Disco 3900 Contour 020 Rear disc mower Pjdpfxoxfc A Nj Adhorb 030 3.80 m working width 040 8 mowing discs with 2 blades each 050 Hydraulic folding