Low loader trailer

HUMBAUR HBTZ 217224 Tandem-Tieflader verzinkt NEU

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Duedpfetcwkrjx Agcjr

Condition: like new (used), functionality: fully functional, mileage: 75,000 km, first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, suspension: parabolic leaf (spring), Year of construction: 2020, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, fog lights, navigation system, IVECO DAILY 35 C 18 Fixed flatbed body Year 08/2020 Diesel engine 6-speed manual gearbox + reverse Euro 6 Category B driving license Power 132 kW (180 HP) Engine size 3,000 cc Wheelbase 3,750 mm Bed length 4,300 mm Payload 870 kg Gross weight 3,500 kg Mechanical leaf spring suspension Twin rear wheels ABS Air conditioning Navigation system LED lights Radio Electric windows & mirrors Dedpfxoyhbfco Agcour 12-month gearbox and engine warranty Mileage: 75,000 km

Condition: used, power: 323.62 kW (440.00 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, emission class: euro6, Equipment: ABS, air conditioning, differential lock, MAN TGS 26.440 6x2 – Euro 6 - 2017: - First registration: 2017; - Engine: 440 HP - Euro 6; - Three axles, 6x2 configuration; - Third axle with intelligent (steerable, both forwards and backwards); - Automatic gearbox; - Hydraulic retarder; - Full air suspension; - Low-profile tyres 315/70 R22.5; - Gross vehicle weight: 26,000 kg. Djdpfxoxzqfdo Agcjur Equipment: - Differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, air-suspended driver seat, sun visor, fog lights, cruise control, sunroof, radio, spoiler, battery master switch. Built as a low loader truck: - Fixed flatbed body with rear inclined overhang, 40 cm aluminium side boards, and double-acting hydraulic rear ramps. - Other vehicles available with 2, 3 or 4 axles, equipped with flatbeds and ramps ranging from 6.50m to 9.40m, or chassis vehicles with customizable equipment. The vehicle can be viewed, by appointment only, at the outfitter’s premises. PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Area) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955. Please contact us to schedule an appointment to arrange company site access. For further information, technical clarification or to know the sale price of the vehicle, please contact our sales managers directly at 045-7950955. Note: The vehicle description is intended as a guideline and may contain errors or inaccuracies. Interested parties are responsible for verifying the exact specifications of the vehicle prior to purchase. PSL Autocarri Srl accepts no liability for potential errors or inconsistencies in this description. PLEASE NOTE: WE WILL ONLY RESPOND TO INQUIRIES THAT INCLUDE THE APPLICANT'S NAME AND TELEPHONE NUMBER.

Condition: used, mileage: 108,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, emission class: euro1, number of seats: 2, Year of construction: 2000, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 FIN: K517249 Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) Duedot Rck Ropfx Agcsr * Protective grille above cabin * 2 x rotating beacons Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, Year of construction: 2020, operating hours: 1,398 h, Equipment: all wheel drive, Kramer 5035 wheel loader, year 2020, with large engine and increased traction power, cab with heating, hydraulic quick coupler, pallet fork, bucket, work lights, in very good condition. Leasing, financing, and trade-in possible. ATTENTION: Workers (m/f/d) wanted on a €580 basis, preferably locksmiths or mechanics. Dujdpfx Aex Hmiregcjr

Condition: used, maximum load weight: 15,860 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 09/2024, next inspection (TÜV): 06/2026, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, * KA-TA-R 21.0: * Wabco EBS (electronic braking system with RSS) * Emergency release mechanism for spring brake cylinders * Drum brakes * Gigant axles * Air suspension with level control during tipping operation * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as a lift axle (fully automatic) * Jost landing gear at the front * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 7-pin 12V power connector * Multi-chamber tail lights with galvanized protective box * 2 LED reversing lights * 1 LED work light on each side * Drawbar with K80 ball head coupling (adjustable in mm, coupling height approx. 440 - 550 mm when loaded) with elevated gallows for connection lines * Bolted, galvanized steel underrun guard * Plastic quarter mudguards in front of the first and behind the last axle * Shovel and broom holder on the front crossmember Dedpfx Ajv D Tb Rogceur * Chassis made of high-tensile fine-grain steel * Steel 3-way tipper body (fixed front wall, continuous side walls without centerboards, right side wall pendulum-operated via central locking and foldable with sideboard spring lifter, left side wall foldable with sideboard hydromatics, rear tailgate pendulum-operated via automatic hook locking, 5 mm steel floor plate made of HARDOX-450 steel or equivalent, 4 x 3t lashing rings per side recessed in outer frame in accordance with accident prevention regulations) * Support load 3t * Tires: 600/55/R22.5 * Errors and interim sale reserved * Trailer is in very good / as-new overall condition

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brake System: * EBS (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with positive-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Steel pallet - 3-way tipper body made from high-tensile steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls - without central post - foldable with drop side spring assist and pendulum action via manual central locking * Screw-on rear stanchions * Combined steel swing doors - 2-wing asymmetrical rear doors, can pivot 270° and be locked (not foldable) with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanized rotary latch and central locking, deactivation function for automatic tailgate opening when tipping backwards with open swing door * 4 mm steel floor plate * Two-stage step in front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t lashing rings each side, recessed into outer frame ----Loading Ramps: Dedpfxsvin Ucs Agcjur * Recessed ramp storage compartment in rear chassis * 1 pair aluminium access ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun guard, and rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted RAL 9010 pure white * Optional paint for side walls in any RAL color is available at extra cost * Axles, air tank, flange towing eye, and front landing gear painted in a shade of black ----Information: * --Load securing certificate according to EN 12642 XL? * Errors and interim sale excepted * Sample photos (actual vehicle may differ due to special equipment) ----Delivery time: * Available from week 15 / 2026

Condition: new, functionality: fully functional, empty load weight: 4,500 kg, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 235×75 R17,5, wheelbase: 1,800 mm, color: blue, Year of construction: 2024, Equipment: ABS, MS Dorse tandem low-loader L65-2 We are offering an extremely stable tandem low-loader from the renowned company MS Dorse. This low loader is characterized by its outstanding stability and high payload capacity. Illustrations are exemplary and may contain options, subject to technical and price changes Data tandem low loader MS Dimensions: - Overall length: 8650 mm - Total height: 3700 mm - Platform: 5500 mm + sloping area 1000 mm - Width: 2540 mm - Distance from the coupling to the first axle: 4620 mm - Wheelbase between the axles: 1800 mm - Platform height: 900 mm - Track width: 1900 mm - Rear ramps: 3120 x 750 mm, individually fixed, manually movable, dimension between ramps 1,004 mm - Trailer height: 800 mm, adjustable Loading capacity: - Payload: 16500 kg - Drawbar load: 1000 kg Permissible total weight: 21,000 kg The certificate for obtaining an exemption permit in accordance with §70 from 18,000 kg to 21,000 kg is included in the price (must be applied for on site) - Towing eye diameter: 50 mm, adjustable - Own weight: approx. 4500 kg - Front support leg: manual - Rear support: manual - Platform floor: Steel + 45 mm hard wood combined Chassis equipment: - Axles: 2×10 tons Trax axles - Tires: 235×75 R17.5 - 8 pieces (PETLAS or equivalent) - Rims: 6.75x17.5 - 8 pieces (twin wheels) - Suspension: Air suspension - Speed: 100 km/h Brake system: - Brake system: Wabco 2S/2M EBS - Brake pad: 330x200 - Air reservoir: 2x60 L - Brake cylinder 1st axle: 24/30, lever length: 180 mm - 2 pieces - Brake cylinder 2nd axle: 24/30, lever length: 180 mm - 2 pieces Electrical equipment: - Brake lights: 2 LED - Side reflectors: 3 left/right LEDs, 2 white reflectors on the front wall - Triangular reflectors: 2 at the rear - Voltage: 24 V - 1 piece 15-pin electrical ISO 12098 (standard) - 1 piece 7-pin EBS ISO 7638 (option) - 1 piece 7-pin electrical ISO 1185 (option) - 1 piece 7-pin electrical ISO 3731 (option) Duedot St Hlspfx Agcer Accessories: - Toolbox: 1 piece - Wheel chocks: 2 pieces made of plastic - File box: 1 piece - Ramp ratchet: 2 pieces - Side reflectors: White/yellow sticker - Lashing strap hooks: 5 on each side embedded in the frame, 6 on the platform - Mud flaps: 2 pieces behind the last axle - Hose and cable holder: 1 piece above the drawbar Paint finish: - Sandblasting: 15 micron - Primer: 80 micron - Acrylic paint: 80 micron RAL 5001 blue Warranty: - General body: 24 months - Axles: 24 months except for brake pads and bearings - Hydraulic equipment: 12 months - Accessories, electrics and tires: No warranty coverage Optional equipment: - SAF axles - Hydraulic support leg - Hydraulic rear outriggers - Galvanization - 400 mm aluminum drop sides - Tire pressure monitoring system (TPMS) - Hydraulically adjustable side ramps - Rotating beacon - Dumotaic compressed air connection - Folding drive-on ramps - Relief springs Drive-on ramps Reduced price

Condition: used, Year of construction: 2023, operating hours: 102 h, 2023 | SEBA New Evolution 70-40 | Used Crusher | 102 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 119600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 82 inspection points 78 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Well kept Jaw chrusher from 2023 , few scrathes on it , conveyorbelts all look OK, left track needs Some tension , jaw and upperdeck in good condition , no further issues during inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39845 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Dusdpfoytn Saex Agcsr ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, Please provide reference number upon request: 20508 Specifications: - 2004 model - C145 jaw crusher - Overhauled - Line drilled - All bearings replaced - Pendulum is assembled - New thrust bearings Dsdpfx Ajwlm Eksgcsur - New cylinder for opening jaw - New press sleeves - New starter cabinet - Crushing plates can be included if desired for an additional price - Ready to deliver Description: We have a 2004 Metso c145 Crusher (overhauled) for sale. Everything has been replaced and there are new bushings, bearings and new control cabinet and cylinders. Everything works as it should but needs to be assembled. Ready to deliver Own weight: Model: 2004 Metso c145 Knuser (overhalt) = More information = Serial number: 3xxxx Please contact ATS Norway for more information