Tipper

Eduard Heckkipper 256x150x100cm Elektro+Notpumpe+Rampen+100kmh

Condition: new, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, Year of construction: 2024, brakes: other, PROMOTION until May 31, 2025, electric tipping operation for only €495.00 net! Fpsdpfx Aaoghpcpjxsp New series of rear tippers! Two-axle, braked rear tipper high-loader with aluminum side walls that can be folded down and removed on all sides, wooden floor covered with sheet steel, welded, hot-dip galvanized steel frame, automatic support wheel, 6 lashing brackets in the floor on the side in a V-groove, 13-pin electrical system with reversing light, hydraulic hand pump, low chassis. Plus freight to Gera and vehicle registration document €200 net. Optional accessories for an additional charge: leaf guard, tarpaulin and bows, 100 km/h equipment, integrated loading ramps, parking supports, etc. Delivery possible for an additional charge! Leasing and financing available. Images are exemplary, some with accessories for an additional charge.

Condition: new, empty load weight: 456 kg, maximum load weight: 1,344 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195/50 r13, Reverse tipper 1800 kg from Eduard 256x150cm with hand pump Fodpfxjqwkkto Aaxopp Axle: Braked: Yes Total weight: 1800 kg Loading area length: 256 cm Loading area width: 150 cm Drawbar length: approx. 124 cm Loading height: 63 cm Dropside height: 30 cm Tires 195/50R Type of base plate: Multiplex & steel With Eduard support legs: No Steel ramps (245 cm): No If you have any questions, please send us a message or give us a call! Subject to technical changes, price changes, errors and prior sale. No liability is accepted for errors and misprints.

Condition: new, empty load weight: 416 kg, maximum load weight: 884 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,480 mm, loading space height: 300 mm, suspension: other, Why used when new is already so cheap Huge selection of immediately available hydraulic tippers at bargain prices! Secure your price advantage now - come - buy - "and take it with you immediately" - New - Handy - Compact - Robust - Affordable- With this reverse tipper you have an optimal work facilitation e.g. for firewood, rock, gravel, sand, garden soil, construction waste etc. New reverse tipper, permissible total weight 1300 kg with hand pump and additionally operable for the cordless screwdriver! Technical data: Permissible total weight: 1300 kg Payload: approx. 884 kg Tare weight: approx. 416 kg Axles: 2 Interior box dimensions: Length/width/height: approx. 256 x 148 x 30 cm Equipment: Manual tipping pump with mechanical operating function and can be operated with a cordless screwdriver! The four side walls can be opened and removed, making them a very good alternative for transporting materials loaded with a forklift truck on all (four) sides of the trailer. Welded frame and hot-dip galvanized chassis Sheet metal floor 4 lashing brackets Automatically folding support wheel 2 wheel chocks 13-pin plug plus pre-freight & FZ documents The illustrations show part. Optional accessories which are not included in the price Optional accessories at an extra charge: - Leaf grate attachment approx. 60 cm - Mesh Numerous other models as rear and three-sided tippers are available in our showroom Viewing possible at our exhibition site in the Bernhards district of Fulda, just 1 km from the A7 motorway between Kassel and Würzburg, directly on the B27 Fpsdpfxorh Eyfj Aaxjp - Sunday is show day! - -Come and have a look too! Despite the greatest care, advertising errors cannot be ruled out, we assume no liability for the correctness of the equipment details, errors and prior sale reserved

Condition: new, empty load weight: 490 kg, maximum load weight: 1,510 kg, overall weight: 2,000 kg, loading space length: 4,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 155R13, Felge schwarz, High loader tandem from the manufacturer ANSSEMS model PSX2000 405x178 Go-Getter. Fedpfx Aeq Rfkcsaxspp The standard equipment of the Anssems flatbed high loader with brake includes black aluminum side panels, all foldable and removable, black rims, storage box, LED lighting, sturdy eccentric locks, lashing eyes on the outside and inside, profile channels for attaching accessories or load securing, very stable welded steel frame, pull-out supports for tailgate, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as high tarpaulin, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, belts and anti-theft device.

Condition: new, empty load weight: 193 kg, maximum load weight: 557 kg, overall weight: 750 kg, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, loading space volume: 1.6 m³, color: grey, construction height: 2,370 mm, working width: 1,570 mm, Manufacturer: Neptun Type: High loader GN124, N7-263 KPS Gross vehicle weight: 750 kg Payload: 557 kg Unladen weight: 193 kg Box dimensions: 2630 x 1450 x 400 mm with tarpaulin and bows 180 cm (middle) / 160 cm (sides) Clear height Tires: 165 70 R13 74N Loading height: 510 mm - Very stable frame thanks to 2 continuous U-profile longitudinal and 2 cross beams. - The trailer is available in the registration version with GV 400 kg, 450 kg, 500 kg, 550 kg, 600 kg, 650 kg, 700 kg, 750 kg - All 4 sides can be opened and removed to load up to 3 Euro pallets from the side. - Once the side walls are removed, the corner stanchions can be removed to make full use of the space. - Lashing eyes in the corners for securing and lashing down the load are standard on all NEPTUN trailers. - Tarpaulin buttons for flat or high tarpaulins are standard on all NEPTUN trailers. - Safe driving thanks to the reinforced V-drawbar, independent wheel suspension and maintenance-free rubber spring axles. - The multifunctional lights are mounted under the tailgate, protected from moisture and verdigris. Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Cheval Liberte Hapert Brian James Trailers We can provide you with a free transfer license plate on request. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Independent wheel suspension and maintenance-free rubber spring axles. - The multifunctional lights are, high tarpaulin, support wheel, marker lights, hot-dip galvanized, unbraked, including warranty. - Very stable frame thanks to 2 continuous U-profiled longitudinal and 2 cross beams. - All 4 sides can be opened and removed to load up to 3 Euro pallets from the side. - Once the side walls are removed, the corner stanchions can be removed to make full use of the space. - Lashing eyes in the corners for securing and lashing the load are standard on all NEPTUN trailers. - Tarpaulin buttons for flat or high tarpaulins are standard on all NEPTUN trailers. - Safe driving thanks to the reinforced V-drawbar, protected from moisture and verdigris, mounted under the tailgate. Fsdpfxev S Eans Aaxopp

Condition: new, empty load weight: 430 kg, maximum load weight: 1,370 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 2,590 mm, loading space width: 1,430 mm, loading space height: 350 mm, tire size: 195/50R13 C, color: silver, AVAILABLE IMMEDIATELY at a special price!!! Secure the price advantage now - come - buy - "take it with you" 1x EXHIBITION TRAILER AT A SPECIAL PRICE!! New rear tipper with hand pump Technical data: Permissible total weight 1800 kg Payload 1370 kg Empty weight 430 kg Loading space length 259 cm Loading space width 143 cm Loading space height 35 cm Rear tilt angle 45° Tires 195/50R13 C Construction and equipment: Commercial frame - stable steel floor in one piece without a wooden layer with solid steel longitudinal and cross beams welded tipping bridge Hand pump with double stroke effect on the drawbar 3-stage tipping cylinder with high ground clearance Frame with long V-drawbar 4 sides foldable and removable V-drawbar with overrun brake and automatic reversing galvanized maintenance-free rubber spring axles Fpodpst Rhakefx Aaxsp reinforced heavy-duty support wheel with 60 mm tube 13-pin plug 6 lashing points inside with Reversing lights Rear wall opens at the back Light bar with protected multi-chamber lights 2 mooring wedges plus pre-freight & vehicle documents Other sizes and around 350 other models are available in our exhibition Viewing possible at our exhibition site in the Bernhards district of Fulda, just 1km from the A7, exactly between Kassel and Würzburg, directly on the B27 ----- Sunday is show day! ----- -----Take a look!----- Buying a trailer is a matter of trust? That's why you should buy it from a professional! Strong brands - strong service - trust in our experience! Financing, trade-in and transfer possible We are happy to advise you personally - by phone and email Despite the greatest care, typos, errors and prior sale cannot be ruled out

Condition: new, empty load weight: 290 kg, maximum load weight: 1,010 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, suspension: other, color: silver, AVAILABLE NOW at a special price!!! Secure your price now - come - buy - "take it home." NEW, aluminum high-loader with removable side walls and removable corner posts Technical specifications: Maximum load capacity Total weight 1300 kg braked Payload approx. 1010 kg 10" tires Fodpfx Ajwliu Isaxopp Loading area / box interior dimensions: approx. 251 x 148 x 30 cm Total length: approx. 3.70 m Features: Very stable frame thanks to two continuous U-shaped longitudinal beams and two cross beams. All four sides can be opened and removed for side loading. Once the side walls are removed, the corner pillars can be removed to fully utilize the space. Lashing eyes in the corners for securing and lashing the load. Safe travel thanks to the reinforced V-drawbar, independent wheel suspension, and maintenance-free rubber spring axles. Plus pre-freight and vehicle documents. Optional accessories for an additional charge: - Cover net - Trailer lock - Adapter As an authorized dealer, we can We supply you with accessories and spare parts from our entire range for every car trailer. Financing available upon request; please specify the desired down payment and term. Numerous other models are available in our large showroom. Viewing is possible at our showroom in the Bernhards district of Fulda, just 1 km from the A7, right between Kassel and Würzburg, directly on the B27. ----- Sundays are showroom days! ----- ----- Come and take a look! ----- Nationwide delivery available for an additional charge. Despite the greatest care, advertising errors cannot be ruled out. We assume no liability for the accuracy of the equipment information. Errors and prior sale reserved.

Condition: new, empty load weight: 290 kg, maximum load weight: 1,010 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,480 mm, suspension: other, color: silver, AVAILABLE NOW at a special price!!! Secure your price now - come - buy - "take it home." NEW, aluminum high-loader with removable side walls and removable corner posts Technical specifications: Maximum load capacity Total weight 1300 kg braked Payload approx. 1010 kg 10" tires Loading area / box interior dimensions: approx. 251 x 148 x 30 cm Total length: approx. 3.70 m Features: Very stable frame thanks to two continuous U-shaped longitudinal beams and two cross beams. Fjdpswlitwsfx Aaxspp All four sides can be opened and removed for side loading. Once the side walls are removed, the corner pillars can be removed to fully utilize the space. Lashing eyes in the corners for securing and lashing the load. Safe travel thanks to the reinforced V-drawbar, independent wheel suspension, and maintenance-free rubber spring axles. Plus pre-freight and vehicle documents. Optional accessories for an additional charge: - Cover net - Trailer lock - Adapter As an authorized dealer, we can We supply you with accessories and spare parts from our entire range for every car trailer. Financing available upon request; please specify the desired down payment and term. Numerous other models are available in our large showroom. Viewing is possible at our showroom in the Bernhards district of Fulda, just 1 km from the A7, right between Kassel and Würzburg, directly on the B27. ----- Sundays are showroom days! ----- ----- Come and take a look! ----- Nationwide delivery available for an additional charge. Despite the greatest care, advertising errors cannot be ruled out. We assume no liability for the accuracy of the equipment information. Errors and prior sale reserved.

Condition: new, empty load weight: 450 kg, maximum load weight: 1,550 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.5 m³, color: other, construction height: 859 mm, working width: 1,660 mm, Manufacturer: Hapert Type: High loader Azure H-2 Perm. weight: 2000 kg Payload: 1550 kg Empty weight: 450 kg Box dimensions: 3050 x 1600 x 300 mm Tires: 195 50 R13C Loading height: 640 mm All drop sides can be folded down and removed - Multiplex floor with 15 mm anti-slip coating. - TÜV-approved load securing system from Hapert: fixing brackets integrated in the side edge. - Designed dropside hinges for very easy attachment of a cargo net. - Solid fold-down support wheel. - V-drawbar. - 4 removable corner stanchions. - 30 cm high aluminum drop sides with robust built-in locks. - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the loading rails, - Chassis fully welded and fully galvanized. Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, solid fold-down automatic support wheel, marker lights, chassis fully welded and fully galvanized, Braked, Incl. guarantee, Multiplex floor with 15 mm anti-slip coating, TÜV-approved load securing system from Hapert, Fastening brackets integrated in the side edge, Designed side wall hinges for very easy attachment of a cargo net, V-drawbar, 4 removable corner stanchions, 30 cm high aluminum side walls with robust built-in locks, Hinged front wall, Tethering hooks on the chassis, U-profile at the rear, for easier attachment of the ramps Fjdpfx Ajgi Sn Doaxspp