Tipper 3-sided

MÜLLER-MITTELTAL 14,4 to Kipper/ Rampen, 1 mtr Gitteraufsätze

Overall weight: 11,900 kg, maximum load weight: 8,450 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 22,420 mm, loading space height: 1,500 mm, Year of construction: 2024, Condition: new, * KA-TA-R 11.9 Masterline: * incl. 1 mtr grid attachments * EBS brake system * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Tool box made of galvanized sheet steel on the right side * 15-pin power plug * Bolted underride guard with LED tail lights * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the outside of the bulkhead * Hot-dip galvanized chassis * Fully galvanized steel Pal. 3 side tipper body * Full-length side walls without central stanchion can be folded down with dropside spring lifter * Tailgate can be folded down and swung open via man. Central locking * hot-dip galvanized bolted rear stanchion Bhet7R7 * 1 x 5 to. lashing ring in each corner Lashing ring recessed and foldable in each corner and 4 x 3 tons at each side. * Lashing rings recessed in the outer frame and hinged * 4 mm sheet steel floor * Rear mounting rail for feeder ramps * Reinforced body with load securing certificate to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles * Storage compartment lockable from the rear under the loading area recessed in the chassis * 235/75 R 17.5 tires * Axles, springs, air reservoir, drawbar and support winch painted black * Hot-dip galvanized side wall paint * 1 metre galvanized grid attachments * Sample pictures * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Overall weight: 19,000 kg, maximum load weight: 14,200 kg, axe configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Condition: new, * ETÜ-TA-R 19.0: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 to. Giant axles * Air suspension * Drawbar with 50 mm flanged drawbar and height adjustment by 110 mm via offset plate * Jost support winch at the front Dawkq2W8J * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side collision protection * Plastic quarter mudguards * 15-pin power plug * LED lights * Reinforcement package for drill transport on the chassis * 50 mm softwood floor in clamped design * Device in front of the bulkhead for retrofitting cont. locks * Bolted front wall made of smooth sheet metal * Split side walls made of sheet steel - trapezoidal profile - can be folded down with central folding stanchion * Steel rear wall can be pushed in between the ramps - holder in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees with 2 to. lashing force every 480 mm * Installation of 3 to. lashing brackets every 600 mm possible * Lasi package: 1 x 10 to. lashing ring in the front and rear corners, 1 x 10 to. UVV lashing ring, 2 x 8 to. UVV lashing rings retractable in the outer frame, various holes in the front and end beams for 1.2 to. lashing option * One-piece mech. grating ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Approach slope at rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, air reservoir, flanged drawbar and support winch painted black * Loading height unloaded approx. 940 mm * Loading height loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall color RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale, * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,880 kg, axe configuration: 2 axles, loading space length: 5,050 mm, loading space width: 2,470 mm, loading space height: 500 mm, first registration: 12/2021, Year of construction: 2021, Condition: used, Equipment: ABS, Müller-Mitteltal tandem tipping trailer with aluminum docking ramps. 0F2Pt8Vuo ----* Gigant axles * Anti-lock braking system (ABS) * Drum brakes * Lashing eyes in the outer frame * Load securing certified according to DIN EN 12642 Code XL ----Sale only to tradesmen! Without guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Overall weight: 19,000 kg, maximum load weight: 14,200 kg, axe configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Condition: new, * ETÜ-TA-R 19.0: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 to. Giant axles * Air suspension * Drawbar with 50 mm flanged drawbar and height adjustment by 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side collision protection * Plastic quarter mudguards * 15-pin power plug * LED lights * Reinforcement package for drill transport on the chassis * 50 mm softwood floor in clamped design * Device in front of the bulkhead for retrofitting cont. locks * Bolted front wall made of smooth sheet metal * Split side walls made of sheet steel - trapezoidal profile - can be folded down with central folding stanchion Bhm3Lf7Z8V * Steel rear wall can be pushed in between the ramps - holder in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees with 2 to. lashing force every 480 mm * Installation of 3 to. lashing brackets every 600 mm possible * Lasi package: 1 x 10 to. lashing ring in the front and rear corners, 1 x 10 to. UVV lashing ring, 2 x 8 to. UVV lashing rings retractable in the outer frame, various holes in the front and end beams for 1.2 to. lashing option * One-piece mech. grating ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Approach slope at rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, air reservoir, flanged drawbar and support winch painted black * Loading height unloaded approx. 940 mm * Loading height loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall color RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale, * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,750 kg, axe configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: 7Uk3Dxk9Xe * RDÜ tire pressure monitoring * Brake system EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm - drawbar extension by 250 mm to 2,250 mm * 15-pin power plug * LED lighting * Support winch at the front * External folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted front wall made of smooth sheet metal * Side walls made of sheet steel - trapezoidally profiled - can be folded down and divided 1x in the middle * Steel rear wall can be pushed in between the ramp brackets in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be installed every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece mechanical grid access ramps with spring mechanism for one-man operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach slope at rear approx. 860 mm Chassis * Drawbar, bulkhead, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate * Wheelbase 1.140, * Color of the side walls in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * available from week 52/ 2024

Overall weight: 14,400 kg, maximum load weight: 10,750 kg, axe configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring * Brake system EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm - drawbar extension by 250 mm to 2,250 mm * 15-pin power plug * LED lighting * Support winch at the front * External folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted front wall made of smooth sheet metal * Side walls made of sheet steel - trapezoidal profiled - can be folded down and divided 1x in the middle Djj8Zt * Steel rear wall can be pushed in between the ramp brackets in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, edged at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be installed every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece mechanical grid access ramps with spring mechanism for one-man operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach slope at rear approx. 860 mm Chassis * Drawbar, bulkhead, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate * Wheelbase 1.140, * Color of the side walls in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * available from week 52/2024

Overall weight: 11,990 kg, maximum load weight: 8,500 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinder * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power plug * Multi-chamber tail lights * hot-dip galvanized bolted underride guard * Tool box made of galvanized sheet steel on the right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel Pal.- 3 side tipper body * Full-length side walls in white, top with inner tube reinforcement, can be folded down without center stanchions with dropside spring jack * Tailgate can be folded down and swivels via man. Central locking * Hot-dip galvanized bolted rear stanchions * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Net hooks * Mounting rail at the rear for the feeder ramps * Steel attachments inserted 500 mm high 3 sides swinging Bjc0E7Nu29Z * Reinforced body with load securing certificate to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment underneath the loading area recessed into the chassis from the rear * Axles, springs, air reservoir and support winch painted black * Tires 285/70 R 19.5 * Side wall paint in 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available for immediate delivery from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders Blnb28Gsj33 * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection Ij0Bg3Mw * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 21,000 kg, maximum load weight: 16,750 kg, axe configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 21.0: * Wabco EBS-E (electric brake system) * RDÜ tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 to. Gigant axles R9Dluei9 * Air suspension * Drawbar with 50 mm flanged drawbar and height-adjustable drawbar * Jost support winch at the front * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side collision protection * Plastic quarter mudguards * 15-pin power plug * LED lights * Version 21 to. GG with reinforced frame and st. axles * Reinforcement package for drill transport on the chassis * 50 mm softwood floor in clamped design * Device in front of the bulkhead for retrofitting cont. locks * Bolted front wall made of smooth sheet metal * Split side walls made of sheet steel - trapezoidal profiled - can be folded down with central folding stanchion * Steel rear wall can be inserted between the ramps - holder in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm * Installation of 3 to. lashing brackets every 600 mm possible * 1 x 10 to. lashing ring in the front and rear corners lashing ring * Lasi package with 2 x 8 to. Lashing rings retractable in the outer frame, in the front and end beams various holes for 1.2 to. lashing option * One-piece mech. grating ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Approach slope at rear approx. 860 mm Chassis * Drawbar, bulkhead, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir and support winch painted black * Loading height unloaded approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall color RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Year of construction: 2023, Condition: new, Equipment: ABS, * TM-TA 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis 15-pin power plug * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements 7Uldvedmbv * axles, springs, air reservoir and support winch painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7 * Sample pictures

Axe configuration: 2 axles, Year of construction: 2023, Condition: used, Tipper-low loader combination. Gross vehicle weight 14,400 kg, payload approx. 11,000 kg. Steel 3-sided tipper, 5,000 x 2,420 x 500 mm (inside), central locking left, right and rear, swinging and folding drop sides, spring lifters for side drop sides, combi-steel wing door rear wall with additional swinging frame for automatic rear wall opening, reinforced and certified body to EN 12642 XL incl. load securing certificate, net hooks, two-stage front access. Drawbar infinitely height-adjustable, drawbar eye 40 mm (50 mm on request). 1 pair of Altec aluminum drive-on ramps, 3,570 x 410 mm (load capacity 10 to/pair), in lockable compartments under the tipper. 4 lashing eyes of 5 tons each in the floor and 8 lashing eyes of 3 tons each recessed in the floor, eccentric. Unloaded loading height approx. 1,070 mm. Lockable tool box. Two-aisle parking support at the front, folding supports at the rear. 2-wire air, 1-wire hydraulics, 24 volt (15-pin). Gigant axles, parabolic suspension with compensation unit, ABS 2S-2M. Four tires 285-70R19.5, reflective contour tape according to ECE-R 104 on the sides and rear. Chassis and tipper body hot-dip galvanized, side walls RAL9010 - pure white. New vehicle; warranty in accordance with manufacturer's guidelines. = Further information = Uz2Nyhtboz New: Yes Unladen weight: 3,400 kg Payload: 11,000 kg GVW: 14,400 kg Condition of front tires: 100 Condition of rear tires: 100 Front tires: 285-70R19.5 Rear tires: 285-70R19.5 Please contact Jan-Marc Schwickert for further information.

Axe configuration: 2 axles, first registration: 12/2022, Condition: used, Equipment: ABS, If you have any questions about the vehicle, please contact Mr. Seidel (tel. ----Müller-Mitteltal KA-TA-RT 14.4 (Master Line) three-axle tipper trailer---- * Roll-up tarpaulin * Hot-dip galvanized frame * Gigant axles * Lashing points embedded in the floor * 2x aluminum ramps under tipper floor * Electronic braking system EBS 2S/2M * 1 pair of ALU docking ramps without channel * Drawbar with friction-locked height adjustment * Air suspension 22.5" (GIGANT) including EBS * Lifting and lowering for air suspension instead of manual lowering * HARDOX 450 steel floor, 4 mm thick * Chassis with underride guard in hot-dip galvanized design * Access platform on both sides of the drawbar, permanently attached, with grab handles on the bulkhead (lowest step height approx. 500 mm high) * 2 LED reversing lights at the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V) * Special paint finish for the body (not metallic) instead of RAL color Roller tarpaulin with automatic spring retraction with hot-dip galvanized protective box, mounted above the bulkhead, secured at the side with rubber Br9Pajzpbfm rubber tensioners, with "load-climber rollers" for dumping cone, Neoprene tarpaulin version Body with 700 mm high M-Strong side walls made of high-strength steel. steel. Combination steel wing door rear wall (2-leaf, asymmetrically divided) can be swiveled and locked through 270° (cannot be folded down), with additional additional swing frame for the automatic rear wall opening function. With forward and raised pendulum point, locking via locking via espagnolette lock at the rear and central locking at the bottom, with with integrated/screwed rubber seal to the perforated strip of the with deactivation function for automatic rear wall opening when tipping backwards with the hinged door open. Total weight: 18,000 kg Standard payload approx.: 13,900 kg Dimensions in the light: 5,000x2,420x700 mm Tires: 385/55R22.5 4x We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Overall weight: 14,400 kg, maximum load weight: 12,080 kg, axe configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Condition: new, Equipment: ABS, tail-lift, * ETM-TA 14.4: * Wabco ABS brake system Bjazmui7Dqo * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted drawbar eye * Jost support winch at the front, side collision protection * Folding rear A-plate * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * plug-in steel rear wall * 50 mm softwood floor * 1 sliding plate support 750 x 1,000 mm in the front area incl. 2 trough stops at the front, each pluggable in 2 positions * 4 insertable tray stops in 2 positions for centering the trays at the sides * 1 x (13.5 to.) UVV-Zurring on each side for attaching clamping elements * 2 ratchet clamps (spindle adjustment) with compensating chain and quick shortener (clamping force 6,300 kg) * Rear cross member for attaching aluminum trailer ramps incl. 2 additional rear drop supports * Unloaded loading edge approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air reservoir painted black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading sill unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Axe configuration: 2 axles, first registration: 12/2022, Condition: used, Equipment: ABS, For inquiries about the vehicle, please contact Mr. Seidel (by phone.----Müller-Mitteltal KA-TA-RT 14,4 (Master Line) Dreisetenkipper Anhänger---- * Roll tarpaulin * Hot-dip galvanized frame * Gigant axles * Lashing points embedded in the floor * 2x aluminum ramps under tipper floor * Electronic braking system EBS 2S/2M * 1 pair of ALU docking ramps without channel * Drawbar with friction-locked height adjustment * Air suspension 22.5" (GIGANT) including EBS * Lifting and lowering for air suspension instead of manual lowering * HARDOX 450 steel floor, 4 mm thick * Chassis with underride guard in hot-dip galvanized design * Access platform on both sides of the drawbar, permanently attached, with grab handles on the bulkhead (lowest step height approx. 500 mm high) * 2 LED reversing lights at the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V) * Special paint finish for the body (not metallic) instead of RAL color Roller tarpaulin with automatic spring retraction with hot-dip galvanized protective box, mounted above the bulkhead, secured at the side with rubber rubber tensioners, with "load-climber rollers" for dumping cone, Neoprene tarpaulin version Body with 700 mm high M-Strong side walls made of high-strength steel. steel. Combination steel wing door rear wall (2-leaf, asymmetrically divided) can be swiveled and locked through 270° (cannot be folded down), with additional additional swing frame for the automatic rear wall opening function. With forward and raised pendulum point, locking via locking via espagnolette lock at the rear and central locking at the bottom, with with integrated/screwed rubber seal to the perforated strip of the with deactivation function for automatic rear wall opening when tipping backwards with the hinged door open. Locking Total weight: 18,000 kg Payload series approx.: 13,900 kg Dimensions in the light: 5,000x2,420x700 mm Tires: 385/55R22.5 4x We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. Br9O3Ssyxee !!! Errors, changes and prior sale reserved !!!

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Condition: new, Equipment: ABS, * TM-TA 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis 15-pin power plug Djj83N * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * axles, springs, air reservoir and support winch painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7 * Sample pictures

Overall weight: 40,000 kg, maximum load weight: 31,000 kg, axe configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, Condition: new, * PT 40.0 Profile: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 to. Gigant axles * Air suspension with lifting and lowering system and RtR valve * Pressure gauge for load weight determination (axles separated on 2 air suspension circuits) * Side collision protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * VA plastic quarter mudguards with splash guard * HA straight galvanized sheet steel skirts with splash guard * Reflective side and rear contour strip * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Drawbar with 50 mm drawbar eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Stem in front of the bogie platform approx. 490 mm long with 45° corners * ROBOTER welded ANTI-slip coating to the steel plate of the bogie platform * La-Si package consisting of: in front of the bulkhead beam left & right 1 x 13.4 to. UVV lashing roes, 4 holes in each side of the bogie platform, each with 2 to. Lashing force, 1 pair of lashing ropes (13.4 tons) hanging at the rear left & right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on each side with simultaneous 2 tons lashing possibility. lashing option * Hot-dip galvanized mechanical folding jib for 3 m total width (but not in the rear slope) Bhcn7Fpmwo * Plank holder for widening under the chassis on the left in longitudinal direction * Excavator stick support above HA up to the end beam approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t. lashing ropes on each side. Lashing ropes in the excavator stick support * Hardwood floor on the running surfaces of the low loading platform * Hydr. one-piece drive-on ramps (approx. 3,000 x 720 mm) mechanically adjustable to the side * Outer planks of the access ramps made of hardwood * Steel construction as preparation for 6-point control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm Chassis * Bogie, folding boom, mechanical drop supports, hot-dip galvanized ramps * Axles, air reservoir, drawbar painted black * 235/75 R 17.5 tires * Vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Condition: new, Equipment: ABS, * TM-TA 14.4: * incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box * with eyelet on both sides and quick shortener in special Y-version 6,3 to * Tensioning force with Lasi certificate * Wabco ABS * Emergency release device for spring-loaded cylinder * Drum brakes * 2 x 7 to. Gigant axles Ie8Vkmyemt * Parabolic springs with equalizing unit * Jost support winch at the front * 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power plug * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions, * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * the axles, springs, air reservoir and support winch are painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 12,080 kg, axe configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Condition: new, Equipment: ABS, * ETM-TA 14.4: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted drawbar eye * Jost support winch at the front, side collision protection * Folding rear A-plate * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * plug-in steel rear wall * 50 mm softwood floor * 1 sliding plate support 750 x 1,000 mm in the front area incl. 2 trough stops at the front, each pluggable in 2 positions * 4 insertable tray stops in 2 positions for centering the trays at the sides * 1 x (13.5 to.) UVV-Zurring on each side for attaching clamping elements * 2 ratchet clamps (spindle adjustment) with compensating chain and quick shortener (clamping force 6,300 kg) Bg2Gamslyu * Rear cross member for attaching aluminum trailer ramps incl. 2 additional rear drop supports * Unloaded loading edge approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air reservoir painted black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading sill unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Condition: new, Equipment: ABS, * TM-TA 14.4: * incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box * with eyelet on both sides and quick shortener in special Y-version 6,3 to * Tensioning force with Lasi certificate * Wabco ABS * Emergency release device for spring-loaded cylinder * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front * 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power plug * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions, * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * the axles, springs, air reservoir and support winch are painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7 Gw8Xjx3

Overall weight: 11,900 kg, maximum load weight: 8,650 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 11.9 Masterline * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the front wall * Steel Pal. 3-side tipper body (continuous side walls -without center stanchions- can be folded down with dropside spring lifter, tailgate can be folded down and swung over man. Central locking * In each corner 1 x 5 to. Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet steel floor * Rear mounting rail for the feeder ramps) * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment below the loading area recessed into the chassis from the rear * Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized Axles * Springs, air reservoir, flanged drawbar and support winch painted black Bjazlzotjif * 235/75 R 17.5 tires * New vehicle with manufacturer's warranty * Sample pictures * Side wall color 9010 pure white * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 40,000 kg, maximum load weight: 31,000 kg, axe configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, Condition: new, * PT 40.0 Profile: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 to. Gigant axles * Air suspension with lifting and lowering system and RtR valve * Pressure gauge for load weight determination (axles separated on 2 air suspension circuits) * Side collision protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * VA plastic quarter mudguards with splash guard * HA straight galvanized sheet steel skirts with splash guard * Reflective side and rear contour strip * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Drawbar with 50 mm drawbar eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Stem in front of the bogie platform approx. 490 mm long with 45° corners * ROBOTER welded ANTI-slip coating to the steel plate of the bogie platform * La-Si package consisting of: in front of the bulkhead beam left & right 1 x 13.4 to. UVV lashing roes, 4 holes in each side of the bogie platform, each with 2 to. Lashing force, 1 pair of lashing ropes (13.4 tons) hanging at the rear left & right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on each side with simultaneous 2 tons lashing possibility. lashing option * Hot-dip galvanized mechanical folding jib for 3 m total width (but not in the rear slope) * Plank holder for widening under the chassis on the left in longitudinal direction * Excavator stick support above HA up to the end beam approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t. lashing ropes on each side. Lashing ropes in the excavator stick support * Hardwood floor on the running surfaces of the low loading platform * Hydr. one-piece drive-on ramps (approx. 3,000 x 720 mm) mechanically adjustable to the side Cb3Bbaw * Outer planks of the access ramps made of hardwood * Steel construction as preparation for 6-point control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm Chassis * Bogie, folding boom, mechanical drop supports, hot-dip galvanized ramps * Axles, air reservoir, drawbar painted black * 235/75 R 17.5 tires * Vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Overall weight: 11,900 kg, maximum load weight: 8,650 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * KA-TA-R 11.9 Masterline * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards 7Ukpiounc0 * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the front wall * Steel Pal. 3-side tipper body (continuous side walls -without center stanchions- can be folded down with dropside spring lifter, tailgate can be folded down and swung over man. Central locking * In each corner 1 x 5 to. Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet steel floor * Rear mounting rail for the feeder ramps) * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment below the loading area recessed into the chassis from the rear * Chassis, drawbar, tipper body, bulkhead, drop sides, folding supports and rear stanchions hot-dip galvanized Axles * Springs, air reservoir, flanged drawbar and support winch painted black * 235/75 R 17.5 tires * New vehicle with manufacturer's warranty * Sample pictures * Side wall color 9010 pure white * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 11,900 kg, maximum load weight: 8,850 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, * KA-TA-R 11.9 "Masterline": * Floor and front wall hot-dip galvanized * EBS braking system * Emergency release device for spring-loaded cylinder * RDÜ tire pressure monitoring * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * LED lighting Bg0Z98Ftmt * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Steel Pal. 3-side tipper body (continuous side walls -without center stanchions- can be folded down with dropside spring jack * Bolted rear stanchions * Combination steel wing doors Rear wall 2-leaf asymmetrically divided 270° swivel and lockable - cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping Locking via galvanized espagnolette lock and central locking system * Deactivation function for automatic rear wall function when tipping backwards with the hinged door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. Lashing ropes embedded in the outer frame, 4 mm sheet steel floor, support rail at the rear for the feeder ramps * Reinforced body with load securing certificate in accordance with EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred & tracked vehicles * Storage compartment lockable from the rear underneath the loading area recessed in the chassis Chassis, drawbar * Front wall, tipping platform, rear stanchions, underride guard, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Axles, springs, flanged drawbar, air reservoir and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Available for immediate delivery from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, * ETK-TA-R 14.4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) Bxhyljxz * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7