Tipper 3-sided

HUMBAUR HTK 185524 NEU 18,0 to Dreiseitenkipper

Overall weight: 18,000 kg, maximum load weight: 13,700 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, tire size: 435/50 r19,5, color: white, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 18.0 to tandem three-way tipper with ramp shaft, Typ. HTK 185024 Premium --- INCLUDING SAF air suspension with lifting & lowering function INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR including lockable ramp cover with lid (privacy screen) Hckj2Fwne Equipment: * Permissible total weight 18,000 kg * Payload approx. 13,700 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,135 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,750 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides in the desired color (RAL 9010 pure white) or hot-dip galvanized * Laser-welded quality steel drop sides, 600 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking bolted on * Removable rear stanchions * Dropside lifting springs on the side drop sides * Drawbar with spindle infinitely height-adjustable for coupling heights unbel. approx. 840 - 1,100 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t geared support winch with load and fast gear * SAF air suspension with lift & lower function * 10 6 t lashing rings recessed * Lateral / rear tipping angle: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system * EBS brake system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 435/50 R19.5 tires * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection through hot-dip galvanizing * Lower loading height thanks to the 435 tires * Safe loading and unloading thanks to telescopic folding supports at the rear * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t or 13 t/pair) with pin lock, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65-75 kg/each) * Plastic toolbox mounted under the loading area * LED rear lights 24 Volt or LED multi-voltage system for 12&24 Volt ∗Stock vehicle - available immediately ∗Subsequent sale reserved ∗Price ex works

Overall weight: 18,000 kg, maximum load weight: 13,600 kg, axe configuration: 2 axles, loading space volume: 7 m³, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2022, Condition: new, total width: 2,550 mm, total height: 1,140 mm, Equipment: ABS, WhatsAp HUMBAUR HTK 185024 Three-way tipper Premium NEW VEHICLE w.EZ Equipment: Technical data: Internal dimensions: approx. 5,030 mm x 2,420 mm x 600 mm Overall dimensions: approx. 7,000 mm x 2,550 mm x 1,750 mm Permissible total weight: 18,000 kg Payload: approx. 13,600 kg Wheelbase: 1310 mm Tires: 435/50 R19.5 inch Loading height: approx. 1,140 mm Drawbar length: approx. 1800 mm Coupling height: approx. 840-1100 mm Rear tipping angle: approx. 48° Lateral tipping angle: approx. 45° 5 pairs of lashing rings, 3000 kg per lashing point Lashing rings recessed in the bridge floor SAF axles Air suspension with shock absorbers, electronically controlled for tilt stabilization, Lifting and lowering function Wide tires 435/50 R19.5" Brake system EBS brake system with stability program in accordance with ECE directive Spring-loaded parking brake 2 interchangeable red/yellow front clutch heads ISO 1728 or DUOMATIC EBS plug-in connection ISO 7638 Note: Towing vehicle must be equipped with an ABS socket Towing device: Galvanized drawbar, DIN screw-type drawbar eye Ø 50 mm, infinitely adjustable crank winch Electrical system 24 volt lighting system with multi-chamber rear lights and LED side marker lights 15-pin connector plug for lighting Dknersvb Frame Solid, welded chassis frame, hot-dip galvanized Lockable storage shaft with plastic rollers for 2 optional drive-on ramps integrated in the frame integrated in the frame Bridge Bridge floor made of 4 mm fine-grained steel Reinforced bridge frame with V-shaped beams, hot-dip galvanized, (due to hot-dip galvanizing, an optical wave formation is possible) 4 ball tilting bearings with 2 non-interchangeable tilting bearing pins Laser-welded quality steel drop sides 600 mm high Drop sides can be folded down at the side and rear, removable and swinging with central locking Removable galvanized rear stanchions Dropside lifting springs on the side drop sides Solid steel bulkhead, removable Drop sides and bulkhead hot-dip galvanized Support Reinforced 12 t geared support winch with load and fast gear 2 telescopic folding supports on the left and right at the rear of the vehicle Hydraulics Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar) Five-stage hard chrome-plated cylinder with lift limiter and safety cables SVK BG3 hydraulic plug-in coupling as single-circuit connection Mudguards on front and rear axle with splash guard system 2 wheel chocks with holder Contour marking white on the sides, red at the rear Approval: COC paper NEW VEHICLE Europe-wide transportation possible ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF Czech,Polski: MARIAN WhatsApp: Wir sprechen,folgende Sprachen/we speak: German, Czech,Polski, Romania, Russia, English

Overall weight: 18,000 kg, axe configuration: 2 axles, loading space volume: 8 m³, loading space length: 5,530 mm, loading space width: 2,420 mm, loading space height: 600 mm, Condition: new, total width: 2,550 mm, total height: 1,750 mm, Equipment: ABS, Humbaur HTK 185524 Three-way tipper Premium---- * Technical data: * Internal dimensions: approx. 5,530 mm x 2,420 mm x 600 mm * Overall dimensions: approx. 7,500 mm x 2,550 mm x 1,750 mm * Permissible total weight: 18,000 kg * Payload: approx. 13,400 kg * Wheelbase: 1310 mm * Tires: 435/50 R19.5 inch * Loading height: approx. 1,140 mm * Drawbar length: approx. 1800 mm * Coupling height: approx. 840-1100 mm * Rear tipping angle: approx. 48° * Lateral tipping angle: approx. 45° * 6 pairs of lashing rings, 6000 kg per lashing point * Lashing rings recessed in the bridge floor---- * Standard equipment: * Axles * SAF axles * Suspension * Air suspension with shock absorbers, electronic * Controlled for tilt stabilization * Lifting and lowering function * Tires * 435/50 R19" wide tires, manufacturer's choice of tires * Brake system * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake Rfxddbur * 2 interchangeable red/yellow front clutch heads ISO 1728 * EBS plug connection ISO 7638 * Note: towing vehicle must be equipped with an ABS socket * Towing equipment * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via crank winch, * Electrical system * 24 volt lighting system with multi-chamber rear lights and LED side marker lights * 15-pin connector plug for lighting * Frame * Solid, welded chassis frame, hot-dip galvanized * Lockable storage shaft with plastic rollers for 2 optional drive-on ramps integrated in the frame * Bridge * Bridge floor made of 4 mm fine-grained steel * Reinforced bridge frame with V-shaped beams, hot-dip galvanized, * (due to hot-dip galvanizing, an optical wave formation is possible) * 4 ball tilting bearings with 2 non-interchangeable tilting bearing pins * Side walls * Laser-welded quality steel drop sides 600 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking system * Removable galvanized rear stanchions * Dropside lifting springs on the side drop sides * Solid front wall made of steel, removable * Finishing * Hot-dip galvanized drop sides and bulkhead * Support * Reinforced 12 t geared support winch with load and fast gear * 2 telescopic folding supports on the left and right at the rear of the vehicle * Hydraulics * Hydraulic three-sided tipping gear with control via the towing vehicle (max. 200 bar) * Five-stage hard chrome-plated cylinder with lift limiter and safety cables * SVK BG3 hydraulic plug-in coupling as single-circuit connection * Equipment * Mudguards on front and rear axle with splash guard system * 2 wheel chocks with holder * White contour markings on the sides, red at the rear * Space for single-line license plate We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Overall weight: 10,500 kg, maximum load weight: 7,500 kg, axe configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Condition: new, total width: 2,550 mm, total height: 1,475 mm, Equipment: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture 2025 * Total weight: 10,500 kg * Payload: 7,500 kg * Empty weight: 3,000 kg * Overall dimensions: 6,960 x 2,550 x 1,475 * Bridge dimensions: 5,035 x 2,420 x 500 E2Mo2Pa * Steel side walls: 500 mm high * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electric and compressed air connections on the drawbar * Storage shaft with 2 aluminum ramps in the chassis frame * 8 ton ramps surcharge 1,499 euros ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and testing the item so that the buyer does not have any false impressions about the condition and suitability. Viewings and testing are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 19,000 kg, maximum load weight: 14,600 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air/air, tire size: 385/65 r22,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system Cp0Ukzl7N3 * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 3,000 kg, empty load weight: 870 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading area can be hydraulically tipped with hand pump and electric pump Tipping angle rear 42, side 50 - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, manufactured in one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, cpl. 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. guarantee, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome plated tipping cylinder, hand pump, from 3000 kg perm. total weight electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting. Blafvt7Dac8

Overall weight: 14,400 kg, maximum load weight: 10,900 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, Equipment: ABS, * Drum brakes * Storage compartment for ramps Pr3Fx * Ramps load capacity pair 10.000 kg on request, price 1.900,- ¤ net * Frame & drop sides completely hot-dip galvanized * Rear wall with automatic rear dropside release * Steel front wall can be folded down to the front * 10 lashing rings recessed in the loading area * Loading height approx. 1,060 mm * Height-adjustable drawbar * Spring-supported side drop sides * Suspension: leaf * Payload: 10,900 kg * Tires: 285/70R19.5 ----Data not binding - Errors excepted - Subject to prior sale

Overall weight: 2,700 kg, maximum load weight: 1,840 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Year of construction: 2024, Condition: new, total width: 1,900 mm, total height: 1,260 mm, * Humbaur HTK 2700.31 * Three-way tipper * New vehicle * Year of construction: 2024 * Total weight: 2700kg * Payload: 1840 kg * Overall dimensions: 4500mm x 1900mm x 1260mm * Interior dimensions: 3140mm x 1750mm x 350mm * Tandem chassis * Chassis and tipper body hot-dip galvanized * Steel tipper body, made from one piece * Hand pump * Multifunctional lighting in the underride guard * Side walls made of anodized aluminium, completely removable * Rear flap can be pivoted * 6 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled screed shaft * Automatic support wheel * V-drawbar * Optional special equipment: 22Yf8L0H * H-frame * Steel grid attachment 620mm * Aluminum plate extension 620mm * Additional side wall extensions 350mm * Steel dropside extension 350mm * 600mm side wall extension * Toolbox * Aluminum planks 1.9to load capacity * Crank telescopic stabilizers * Electric pump combined with hand pump * Flat tarpaulin in various colors * Tarpaulin & frame 1600mm in various colors * 1800mm tarpaulin & bows in various colors HTK 2700.31 with electric pump 6999EUR HTK 3000.31 7199EUR HTK 3500.31 7899EUR ATTENTION !!!!! BE SURE TO READ !!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 7,500 kg, empty load weight: 2,250 kg, maximum load weight: 5,250 kg, axe configuration: 2 axles, loading space length: 6,070 mm, loading space width: 1,450 mm, loading space height: 2,200 mm, suspension: air/air, tire size: 215/75 r15,7, color: orange, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 7.5 to tandem three-way tipper with ramp shaft, Typ. HTK 754020 Premium --- --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAW TUBE INCLUDING HOT-DIP GALVANIZED TIPPER BODY including lockable ramp cover with lid (privacy screen) --- --- Equipment: * Permissible total weight 7,500 kg * Payload approx. 5,250 kg Bdqmf8Kt7Rp * Loading area approx. 4,000 x 2,030 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body & chassis through complete hot-dip galvanizing * Side walls in RAL color of choice (galvanized for an additional charge) * Laser-welded quality steel drop sides, 400 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Solid front wall made of galvanized steel, plugged and removable * Infinitely height-adjustable drawbar for coupling heights unloaded approx. 560 - 900 mm * DIN screw drawbar eye Ø 40 mm * Heavy-duty automatic support wheel * 2 pieces of 3 to lashing rings recessed in the corners * 3 pairs of 1 to drop lashing brackets recessed in the outer frame * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 215/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally available for an extra charge: * 1 pair of ALU drive-on ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (tare weight approx. 31 kg/each) * Plastic toolbox mounted under the loading area * Galvanized side walls * 24 volt electro-hydraulic system with battery and remote control * Steel attachments etc. ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works - Gersthofen

Overall weight: 3,000 kg, empty load weight: 907 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear 42, side 50 with leaf grid attachment/steel grid attachment 600 mm high, 4-sided swinging - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made from one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, completely removable - rear flap can be swivelled - 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting D07Onq

Overall weight: 11,900 kg, maximum load weight: 8,750 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, Equipment: ABS, * Drum brakes * Storage compartment for ramps * Aluminum ramps load capacity pair 8.000 kg on request, price: 1.800,- ¤ net Brsquknxl * Frame completely hot-dip galvanized * 10 lashing eyes on the loading area * Loading height approx. 990 mm * Height-adjustable drawbar * Side drop sides with spring support * Trailer available immediately * Suspension: leaf * Payload: 8,750 kg * Tires: 235/75R17.5 ----Information not binding - errors excepted - subject to prior sale

Overall weight: 3,500 kg, maximum load weight: 2,315 kg, axe configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, Year of construction: 2024, Condition: new, total width: 2,280 mm, total height: 1,240 mm, * Humbaur HTK 3500.41 * Three-way tipper * New vehicle * Year of construction: 2024 * Total weight: 3500kg * Unladen weight: 1185kg * Payload: 2315kg * Overall dimensions: 5712mm x 2280mm x 1240mm * Interior dimensions: 4100mm x 2100mm x 350mm * Side walls made of anodized aluminium, completely removable * Rear flap hinged * Chassis and tipper body hot-dip galvanized * Steel tipper body Seib8Nk3Jb * Electric pump combined with emergency hand pump * Multifunctional lighting in the underride guard * 8 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled screed shaft * Automatic support wheel * V-drawbar * Optional special equipment: * H-frame * Steel grid attachment 620mm * Aluminum plate extension 620mm * Additional side wall extension 350mm * Steel dropside extension 350mm * Additional side wall extension 600mm * Toolbox * Aluminum planks 2.8to load capacity * Telescopic crank supports * Flat tarpaulin color of your choice ATTENTION !!!!! BE SURE TO READ !!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 14,400 kg, maximum load weight: 10,900 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, tire size: 285/70 r19,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 14.4 to tandem three-way tipper with ramp shaft and automatic tailgate release, Typ. HTK 145024 Basic --- 2Vowey --- INCLUDING AUTOMATIC TAILGATE RELEASE INCLUDING THROUGH-LOADING VERSION INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES incl. lockable ramp shaft with cover (privacy screen) --- --- TOP! As an option, we can offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. * Simple & quick handling * No loose parts as with pin locks (risk of loss) * No need to drill holes in the rear carrier / floor panel --- --- Equipment: * Permissible total weight 14,400 kg * Payload approx. 10,900 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,050 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,580 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides through complete hot-dip galvanizing * Laser-welded quality steel drop sides, 500 mm high * Side and rear drop sides can be folded down, removable and bolted to swing with central locking system * Rear wall with automatic rear dropside release * Galvanized and bolted rear stanchions * Dropside lifting springs on the side drop sides * Solid front wall made of galvanized steel, can be folded forward (through-loading system) * Drawbar with horizontal spindle infinitely height-adjustable for coupling heights of approx. 760 - 1,050 mm * DIN screw-type towing eye Ø 40 mm * Reinforced 12 t gear support winch with load and fast gear * 10 pieces 3 tons lashing rings countersunk * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * EBS braking system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * Tires 285/70 R19.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing in an immersion bath * Through-loading system with fold-down front wall * Rear wall with automatic unlocking when tipping backwards * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65 kg/each) * Plastic toolbox mounted under the loading area ∗Storage vehicle - promptly available

Overall weight: 3,000 kg, empty load weight: 907 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, first registration: 08/2023, next inspection (TÜV): 08/2025, color: other, Condition: used, construction height: 1,260 mm, working width: 1,930 mm, Equipment: second-hand vehicle warranty, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Payload: 2130 kg Empty weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area with hand pump and electric pump hydraulically tiltable Tipping angle rear 42, side 50 with leaf grid attachment / steel grid attachment 600 mm high, 4-sided oscillating Due to business closure, the trailer was bought back. It is in mint condition and has only been used approx. 3 times. - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made of one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg permissible total weight electric pump with hand pump - 13-pin plug and reversing light - Side walls made of aluminium 350 mm high, cpl. 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, V-drawbar hot-dip galvanized, tipper body made of steel, made from one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg perm. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Cnqcjppfvs

Overall weight: 3,500 kg, maximum load weight: 2,250 kg, axe configuration: 3 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, Year of construction: 2024, Condition: new, total width: 2,280 mm, total height: 1,240 mm, * Humbaur HTK 3500.41 Tridem * Three-way tipper * Three-axle * New vehicle * Year of construction: 2024 * Total weight: 3500kg * Unladen weight: 1250kg * Payload: 2250kg * Overall dimensions: 5484mm x 2280mm x 1240mm Bodagyqvzan * Interior dimensions: 4100mm x 2100mm x 350mm * Side walls made of anodized aluminium, completely removable * Rear flap hinged * Chassis and tipper body hot-dip galvanized * Steel tipper body * Electric pump combined with emergency hand pump * Multifunctional lighting in the underride guard * 8 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled screed shaft * Automatic support wheel * V-drawbar * Optional special equipment: * H-frame * Steel grid attachment 620mm * Aluminum plate extension 620mm * Additional side wall extension 350mm * Steel dropside extension 350mm * Additional side wall extension 600mm * Toolbox * Aluminum planks 2.8to load capacity * Telescopic crank supports * Flat tarpaulin in various colors ATTENTION !!!!! BE SURE TO READ !!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Axe configuration: 2 axles, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,450 mm, loading space height: 400 mm, next inspection (TÜV): 01/2026, color: other, Condition: new, THREE-WAY TIPPER HTK 105024 L / THROUGH-LOAD VERSION WITH SMB AXLES, model: 10580-1 GVW: 11,900 kg (gross vehicle weight rating) = can be unloaded for you at no extra charge! Payload: approx. 9,000 kg (standard equipment) Length of loading area: approx. 5000 mm Tires: 235/75 R17.5 6L Width of loading area: approx. 2420 mm = DRIVING FRAME + BRIDGE FRAME + DRAWING TUBE FIRE-GALVANIZED IN THE DIVE BATH!!! = The PIPE WALL CAN BE CLAPPED TO THE FRONT!!! THROUGH-LOADING DESIGN!!! = DROPSIDE LIFTING SPRINGS FOR THE SIDE DROP SIDES = 8 LASHING POINTS SUNK INTO THE BRIDGE FLOOR = GEAR SUPPORT WINCH BELOW THE LEVEL OF THE LOADING AREA = TWO FOLDING AND TELESCOPIC SUPPORT FEET AT THE REAR = 450 MM HIGH SIDE WALLS = THREE-SIDE CENTRAL LOCKING = 4x REPLACEABLE BALL TIPPING BEARINGS WITH DAMPING SHELLS = THROUGH-TO-THROUGH TIPPING BEARINGS (ALSO AT THE REAR!!!) = 4-FOLDING WINGS WITH ANTI-SPRAY SPRAY PROTECTION SYSTEM = MASSIVE UNDERFRAME PROTECTION WITH FOUR-CHANNEL TUBE REINFORCEMENT = STRONG SMB AXLES Side walls are hot-dip galvanized Drawbar height-adjustable Stowage box mounted Aluminium drive-on ramps Automatic reverse drive, Rubber spring axle, Independent wheel suspension, Tiltable loading area, Support wheel, Marker lights, Hot-dip galvanized, Braked, Incl. Warranty included Eqfju9L

Overall weight: 3,500 kg, maximum load weight: 2,485 kg, axe configuration: 2 axles, loading space length: 3,630 mm, loading space width: 1,855 mm, loading space height: 350 mm, Year of construction: 2024, Condition: new, total width: 2,023 mm, total height: 1,251 mm, * Humbaur HTK 3500.37 * Three-way tipper * New vehicle * Year of construction: 2024 * Total weight: 3500kg * Unladen weight: 1015kg * Payload: 2485kg * Overall dimensions: 5088mm x 2023mm x 1251mm * Interior dimensions: 3630mm x 1855mm x 350mm * Side walls made of anodized aluminium, completely removable * Rear flap hinged * Chassis and tipper body hot-dip galvanized * Steel tipper body * Electric pump combined with emergency hand pump * Multifunctional lighting in the underride guard * 8 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled screed shaft * Automatic support wheel * V-drawbar * Optional special equipment: * H-frame * Steel grid attachment 620mm * Aluminum plate extension 620mm * Additional side wall extension 350mm * Steel dropside extension 350mm * Additional side wall extension 600mm * Toolbox * Aluminum planks 2.8to load capacity * Telescopic crank supports * Flat tarpaulin in various colors * Tarpaulin & bow 1600mm in different colors * 1800mm tarpaulin & bows in various colors Optional accessories: -Side wall extension aluminum 350 mm HTK..31 1000EUR -Side wall extension aluminum 600mm pendulum 1950EUR -Steel grid extension 600 mm for HTK..31 1100EUR -Aluminum sheet attachment 600 mm for HTK..31 1700EUR -Steel grid attachment 1000 mm for HTK..31 1900EUR Bobpo3Trvna HTK 3000.37 8499EUR HTK 3500.37 8999EUR ATTENTION !!!!! BE SURE TO READ !!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 2,000 kg, empty load weight: 643 kg, maximum load weight: 1,335 kg, axe configuration: 2 axles, loading space volume: 1.6 m³, loading space length: 2,670 mm, loading space width: 1,500 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,220 mm, working width: 1,680 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 2000.27 Perm. total weight: 2000 kg Weight: 2000 kg Payload: 1335 kg Unladen weight: 665 kg Box dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading area can be hydraulically tilted with hand pump Tipping angle rear 45 degrees, side 50 degrees - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, manufactured in one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg permissible total weight - Electric pump with hand pump - 13-pin plug and reversing lights 13-pin plug and reversing light - Side walls made of powder-coated, galvanized sheet steel, cpl. 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, galvanized sheet steel, braked, incl. guarantee, V-drawbar hot-dip galvanized, chassis and tipper body hot-dip galvanized, tipper body made of steel, made from one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, powder-coated side walls, completely removable, rear flap can be swung, 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Bsbnlzmys7

Overall weight: 3,500 kg, maximum load weight: 2,600 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Year of construction: 2024, Condition: new, total width: 1,900 mm, total height: 1,260 mm, * Humbaur HTK 3500.31 * Three-way tipper * New vehicle * Year of construction: 2024 * Total weight: 3500kg * Payload: 2550kg * Overall dimensions: 4500mm x 1900mm x 1260mm * Interior dimensions: 3140mm x 1750mm x 350mm * E-pump combined with emergency hand pump * Tandem chassis * Chassis and tipper body hot-dip galvanized * Steel tipper body, made from one piece * Multifunctional lighting in underride guard * Side walls made of anodized aluminium, completely removable * Rear flap can be pivoted * 6 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled plank shaft * Automatic support wheel * V-drawbar HTK 2700.31 6399EUR HTK 2700.31 with electric pump 6999EUR HTK 3000.31 7199EUR HTK 3500.31 7799EUR Optional accessories: -Side wall attachment aluminum 350 mm HTK..31 950EUR -Shelf wall attachment aluminum 600mm pendulum 1850EUR -Steel grid extension 600 mm for HTK..31 999EUR -Aluminum sheet attachment 600 mm for HTK..31 1549EUR -Steel grid attachment 1000 mm for HTK..31 1800EUR ATTENTION !!!!! BE SURE TO READ!!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 Bdfnufllxnn always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 3,000 kg, empty load weight: 972 kg, maximum load weight: 2,100 kg, axe configuration: 2 axles, loading space volume: 2.7 m³, loading space length: 3,630 mm, loading space width: 1,850 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,251 mm, working width: 2,022 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.37 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2100 kg Unladen weight: 900 kg Box dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading height: 740 mm Loading area can be hydraulically tilted with hand pump and electric pump Tipping angle rear 45, side 45 - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, manufactured in one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, cpl. 8 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. guarantee, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome plated tipping cylinder, hand pump, from 3000 kg perm. total weight electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 8 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Djdfrd

Overall weight: 18,000 kg, maximum load weight: 13,800 kg, axe configuration: 2 axles, loading space length: 5,040 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,710 mm, Equipment: tail-lift, * Humbaur HTK 185024 * Tandem three-way tipper * New vehicle * Air suspension * Total weight: 18000kg * Unladen weight: 4200kg * Payload: 13800kg * Overall dimensions: 6950mm x 2550mm x 1710mm * Interior dimensions: 5040mm x 2420mm x 600mm * Coupling drawbar eye * Axles with drum brakes * Maintenance-free parabolic suspension for optimum load compensation * Air brake with release valve * Compressed air coupling heads (red/yellow) * Automatic anti-lock brake (ABV) * EBS brake system * Quality steel drop sides, can be folded down at the sides and rear, removable and swingable * 2 rear supports * Central locking * Removable bulkhead * Lashing points in bridge floor * Reinforced 12-tonne geared support winch with load and fast gear * Galvanized central tube infinitely adjustable via crank handle * Extra-wide single tires for low ground pressure * LED side marker lights * Motorized hydraulic three-sided tipping gear Dpdw32 * Tires: 435/50 R19.5 * Screed chute * Side wall spring * Optional accessories possible * Price varies depending on equipment * We would be happy to put together an individual offer for you ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, suspension: other, color: silver, Condition: new, gearing type: other, driver cabin: other, emission class: none, Special price! Stock vehicle from 2023! Not first registered! 9930553 Three-way tipper with electric pump, manufacturer: Humbaur, type: HTK 3500.31, internal dimensions: 3140 X 1750 X 350 mm L.W.H., permissible total weight: 3500 kg, empty weight: approx. 900 kg, payload approx. 2600 kg (payload information may vary depending on equipment and construction), tires: 13 inches, loading height approx. 760 mm, electric hydraulic pump with cable remote control, battery and manual emergency pump, battery and hydraulic unit with cover, tipping angle at the rear and sides approx. 45 °, stable angle lever locks on the side walls, V-drawbar bolted to welded frame construction, hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, solid steel tipping bridge, made from one piece (completely wood-free), 4-stage tipping cylinder, Pendulum flap at the rear, 13-pin plug with reversing light, 6 flush lashing points integrated in the bridge floor, pulling force 800 kg per tie-down ring, automatic support wheel, integrated ramp shaft for easy retrofitting of aluminum loading ramps, mud flaps, side lights, including vehicle documents, Possible options and accessories for this trailer:, wheel shock absorbers including 100 km/h report, grid attachment 600 mm, additional side wall attachment 350 mm, aluminum sheet attachment 600 mm, H-frame for transporting long materials, aluminum loading ramps 2800 kg load capacity per pair, net hooks mounted on the side walls, load securing net, tool box, spare wheel including holder, anti-theft device, registration of your new trailer with the road traffic authority, We would be happy to show you how you can finance your new trailer in convenient monthly installments and create a customized financing offer for you. We always have more than 2,000 trailers in stock. You can find a large number of our trailers online at or visit us in Horn-Bad Meinberg, we look forward to seeing you! Images may show accessories that are not included in the standard delivery scope. Images and technical data may vary slightly due to constant further developments. Errors and changes reserved! Cro2Enzky0

Overall weight: 3,000 kg, maximum load weight: 2,120 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Condition: new, HUMBAUR HTK 3000.31 Three-way tipper with aluminum side walls *Electric pump and hand pump Technical data: Trailer type: Two-axle Construction type: Aluminum Rear tipping angle: 45 ° p angle: 45 ° Total weight: 3000 kg Payload: 2120 kg 0Z9Bc0Nam Length (inside): approx. 3140 mm Length (total): approx. 4500 mm Width (inside): approx. 1750 mm Width (total): approx. 1930 mm Height (inside): approx. 350 mm Height (total): approx. 1260 mm Loading height: approx. 745 mm Standard equipment * V-drawbar hot-dip galvanized * Chassis and tipping bridge hot-dip galvanized * Tipping bridge made of steel, made from one piece * Hand pump, optional electric hydraulic pump from 3000 kg permissible total weight electric and hand pump * Humbaur multifunctional lighting * Side walls made of anodized aluminum, completely removable * Rear flap can be pivoted * Tie rings mounted in the bridge floor, pulling force 800 kg per tie ring * Support wheel * Plank shaft as preparation for aluminum planks for easy retrofitting * E-pump HTK combined with hand pump included in price Surcharge for Aluminum loading ramps..... 525.00 euros incl. VAT Matching grid attachment, high-quality version... 1,150.00 euros t. Matching sheet metal attachment, high-quality version..... euros t. Matching flat tarpaulin, high-quality version..... euros t. Surcharge for steel side wall ..... Euro gross NEW PRODUCT - Incl. invoice with VAT, braked 2 years TÜV/unbraked 3 years TÜV and 2 years guarantee. The vehicle documents can be sent in advance after the deposit or payment has been made so that you can register the trailer for collection. Some pictures do not correspond to the basic equipment Subject to errors and changes Collection from the main office Engelhard trailer wholesale market Steinauer Weg 15 91589 Aurach Tel: Fax: Homepage: On request, the handover can also take place in 06618 Wethau, (Gmach company) collection warehouse OST near Leipzig Tel. , Fax for a surcharge of 150.00 Euro (if in stock there!). The handover fee is to be paid directly on site IMPORTANT! - If you would like to pick up in Wethau, please call us in advance to check availability! Opening hours: Monday - Friday 8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 5:00 p.m. Saturday 9:00 a.m. - 1:00 p.m. Outside of these times, you can also send your enquiries by fax at any time.

Overall weight: 3,500 kg, empty load weight: 1,075 kg, maximum load weight: 2,425 kg, axe configuration: 2 axles, loading space length: 3,620 mm, loading space width: 1,845 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur HTK 3500.37 Three-way tipper Car trailer Age: New (year of production: 2024) 2 years general inspection from the day of first registration Incl. registration documents (vehicle registration document / registration certificate part 2 and COC) Available from: Immediately (in stock)! Financing possible through our partner banks! Technical data Permissible total weight: 3,500kg Empty weight: approx. 1,075kg Payload: approx. 2,425kg Number of axles: 2 Loading space length: 3,620mm Loading space width: 1,845mm Loading space height: 400mm Brake type: Braked, overrun brake Chassis: High loader (wheels under body), rubber spring axles Electrics: 12V, 13-pin plug Tire size: 185 R14C Special equipment Wheel set 185 R14C Fuhrmann profile side walls made of galvanized sheet steel Equipment Tipping function by hydraulic pump (electric / electric pump) Emergency hydraulic pump (mechanical / hand pump) Ramp shafts Steel base plate Side walls foldable and removable Side wall at the rear as a flap or Pendulum flap Automatic support wheel Lashing eyes Frame welded and galvanized V-drawbar AL-KO or Knott axles and brake system Accessories (extra charge) 100km/h certificate including retrofitting 4x wheel shock absorbers Aluminum loading ramps Aluminum rims silver / black Parking supports Trailer net Trailer lock Bluetooth receiver for electric pump Dqvtcl H-frame Height-adjustable drawbar Wheel set 195/50 R13 Spare wheel 185 R14C including holder Tractor connection for hydraulic pump Tensioning belt Steel side wall attachment 40cm (Fuhrmann profile) Vehicle delivery throughout Germany Registration throughout Germany Transfer license plate (valid for 5 days) Note Weight information may vary depending on equipment, errors, prior sale and changes reserved! Condition, drivability: roadworthy, warranty: vehicle warranty from the manufacturer

Axe configuration: 2 axles, loading space length: 3,630 mm, loading space width: 1,855 mm, loading space height: 950 mm, suspension: other, color: black, Condition: new, gearing type: other, driver cabin: other, emission class: none, 9929357 Special price! Stock vehicle from 2022! No first registration! Humbaur three-way tipper with electric pump, lattice top and black steel side walls, manufacturer: Humbaur, type: HTK 3500.37 with electric pump, internal dimensions: 3630 x 1855 x 350 L.W.H., Permissible total weight: 3500 kg, Unladen weight: approx. 950 kg, Payload approx. 2550 kg (payload specifications may vary depending on equipment and design), 600 mm grid extension, 13 inch tires, Loading height approx. 695 mm, Electric hydraulic pump with cable remote control, Battery and manual emergency pump, Battery and hydraulic unit with cover, Rear and side tipping angle approx. 45 °, Robust steel drop sides foldable and removable, black, Sturdy angle lever locks on the drop sides, V-drawbar bolted to welded frame construction, Hot-dip galvanized, Chassis and tipper body hot-dip galvanized, Solid steel tipper body, made from one piece (completely wood-free), 4-stage tipping cylinder, rear swing flap, 13-pin plug with reversing light, 8 flush-mounted lashing points integrated in the bridge floor, tractive force 800 kg per tie-down ring, heavy-duty automatic support wheel, integrated ramp shaft for easy retrofitting of aluminum drive-on ramps, mud flaps, marker lights, incl. vehicle documents. Vehicle documents, Possible options and accessories for this trailer:, Wheel shock absorber incl. 100 km/h certificate, Aluminum ramps, Net hooks mounted on lattice attachment or side wall, Load securing net, Tool box mounted, Spare wheel incl. holder, Anti-theft device, Registration of your new trailer at the road traffic office, We would be happy to show you how you can finance your new trailer in convenient monthly instalments and make you an individual financing offer. We have more than 2,000 trailers permanently in stock. You can find a large number of our trailers online at Or you can visit us in Horn-Bad Meinberg - we look forward to seeing you! Illustrations may show accessories not included in the standard scope of delivery. Due to constant further developments, illustrations and technical data may vary slightly. Errors and changes excepted! Hloo2Zn2O