Forestry vehicle

Woodcracker C550 Double rotation

Condition: new, Year of construction: 2024, operating hours: 3 h, MORITZ FR 75 (0010) _RH-10575/6-II Pfanzelt forestry crawler (0020) Dimensions: (0030) - Crawler vehicle with rubber tracks (AS), (0040) Track width 300 mm (0050) - Hydraulically adjustable track width, (0060) from 1,200 mm to 1,600 mm overall width (0070) Telescopic via radio control (0080) - Overall length with mounted winch and (0090) dozer blade approx. 2,300 mm (0100) - Ground clearance: approx. 320 mm (0110) - Height to top of frame approx. 1,350 mm (0120) - Approach angle approx. 50° at front and degrees at rear (0130) - Weight approx. 1.0 t in (0150) standard configuration (0160) Engine: (0170) - Deutz diesel engine TD2.9L4, 4-cylinder, water-cooled, turbocharged (0190) - Power 55 kW / 75 HP (0200) - EU emission stage V (0210) - Fuel tank capacity: approx. 45 l (0220) - Hydraulic oil: approx. 30 l (0230) - Cleanfix reversible fan (0240) - Combined radiator for water/hydraulic oil (0250) Travel hydraulics: (0260) - Closed dual-circuit system (0270) proportional (2 x 11 kW), (0280) - All driving functions controllable by radio (0290) - Pre-filtered fine oil filtration (0310) - Infinitely variable travel speed: (0320) 1st gear 0–3 km/h, 2nd gear approx. 0–6 km/h (0330) - Maximum end speed steplessly adjustable Iodpfsxbittjx Anksia (0350) - Drift adjustment to compensate for (0360) hillside forces during (0370) mowing operations across slopes (0380) - Automatically hydraulically tensioned (0390) dual idler wheel (0400) On-board hydraulics: (0410) - Separate oil circuit, pump with approx. l/min at 200 bar (0430) - Standard package includes one proportional (0440) control valve (for lift linkage) with float position (0460) - In total, up to 4 (0470) proportional double-acting valves and (0480) 2 on/off double-acting valves (0500) Chassis: (0510) - Torsion-resistant box section made of (0520) special steel (0530) - Large lockable storage compartment (0540) integrated laterally in chassis (0550) plus an open top compartment (0560) - Lashing points for securing the crawler (0570) - Large engine hood for maintenance work (0580) - Full-length skid plate made of (0590) solid steel (0600) - All-around branch deflector with (0610) integrated hood protection (0620) - Standard rear linkage with max. (0630) lifting force at coupling point: 11 kN (0640) - Optional front linkage with max. (0650) lifting force at coupling point: 7 kN (0660) Operation of the entire machine: (0670) - Radio remote control for all functions (0680) - Emergency stop (0690) - Engine speed adjustment (0700) - Fan reversal (0710) - Driving and steering (0720) - 1st and 2nd gear (0730) - Drift adjustment (0740) - Winch control (0750) - Dozer blade up/down (0760) - Linkage float position (0770) - Optional linkage relief (0780) - Track width adjustment (0790) - Travel direction reverse (directional reversal) (0800) - PTO on/off (0810) - Auxiliary control valves (0820) - Winch operation/external consumers (0830) - Signal horn (0840) - Optional lighting (0850) ALL RADIO COMMANDS ON ONE CONTROL LEVEL (0860) PTO DRIVE Crawler with PTO drive (0870) - Maintenance-free, oil-immersed and (0880) oil-cooled multi-disc clutch (0890) PTO speed at the gearbox approx. rev/min at 2,100 rpm (0910) Direction of rotation when viewed from the stub (0920) in clockwise direction (0930) WORKING HYDRAULICS Performance hydraulics crawler (0940) LIFTING DEVICE Excavating device winch (0950) TENVORHANG_F

Condition: used, Year of construction: 2014, _____4900 operating hoursChopping of hard wood up to 45cmChopping of soft wood up to 56cmThroughput up to approx. 240srmInlet openingInlet width 1.20mInlet height (in mm) 680Drum diameter 82cm Helex rotorHydraulic blowerRadio JES for chipper, camera,Sieves G30, G80,Truck 230000km, hours approx. 12000 hrsMachine has always been well maintained and is in good condition,Storage location:Customer Iedpjv Em I Hefx Anksia

Condition: used, Year of construction: 2017, operating hours: 11,315 h, Crawler loader with approx. 2.2 m³ 4+1 bucket, bucket extension grid, front protection grid on the cab, 560 mm track pads, operating hours: 11,315, fire suppression system, rear-view camera, air conditioning. The vehicle may be covered with advertising stickers and/or labeled. SI85292 Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or labeled. Our general terms and conditions of delivery and payment apply. Ijdpfx Anju Eabkekeia We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: like new (used), functionality: fully functional, power: 151 kW (205.30 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 17,990 kg, operation weight: 17,990 kg, drive condition: 100 %, chain condition: 100 %, first registration: 09/2024, next inspection (TÜV): 09/2025, emission class: euro5, shovel volume: 3.22 m³, Year of construction: 2022, operating hours: 294 h, machine/vehicle number: HNNM000001, Equipment: UVV, additional headlights, air conditioning, cabin, hydraulics, onboard computer, soot filter, steel tracks, Price on request - Demo machine with only 250 hours Demo machine in like-new condition with 6-way foldable blade + 3 tooth ripper Transport width 2,999 mm This machine is fully equipped for 3D control. Iijdeqnvqfjpfx Ankja * Operating weight 17,990 kg * IVECO engine, 6-cyl., 6.7 l with 205 HP * Linde Hydraulics drive. more info at klarmann.de / shantui all prices + VAT, ex location Eltmann

Condition: used, Year of construction: 2025, Equipment: cabin, Ref: 5363 Multiple stock units: with or without automatic lubrication With or without double hydraulic motor for tiltrotator Cutting diameter: 450mm Grapple opening: 1600mm Shear opening: 800mm Required flow: 80-160L/min Required pressure: 280bar Carrier weight: 20-25T Multigrip collecting grapple Weight: 1500-2100kg Autospeed Continuous rotation tiltrotator Collector arm with quick-change system (200kg) With changeover valve and cable kit between tiltrotator/collector Iisdpji Hy Svsfx Ankoa Automatic lubrication for tiltrotator Spare blade Plate with bolts and nuts C-R-G-S thickness 30 mm Dimensions 650 mm x 600 mm, weight approx. 100 kg Delivery time (days): 1 Condition: New

Condition: used, Year of construction: 2025, Equipment: cabin, Ref.: 6567 Max. cutting diameter softwood: 400 mm Max. cutting diameter hardwood: 320 mm Shear grapple opening: 1,060 mm Weight: 620 to 1,170 kg Iiedpfji Hy R Rjx Anksa Hydraulic flow rate: 70–150 L/min Operating pressure: 280 bar Carrier weight: 12 -> 20 t Spare blade with bolts and nuts (+/- 50 kg) Plate with bolts and nuts C-R-G-S (30 mm steel, unpainted) Dimensions: 650 mm x 600 mm, approx. 100 kg Delivery time (in days): 1 Condition: New