Claas Tuningen

Condition: used, Year of construction: 2023, operating hours: 1 h, EASYCUT B 950 COLLECT used Krone mower 202397000 EasyCut B 950 Collect MW_1820 Comfort control MW_0770 Drive: 1000 rpm right MW_0240 Shear bolt safety, rotation "B" MW_0820 Quick-change cutter bar B_383 Hydraulic swath curtain B_384 Hydraulic rear frame lift B_465 SmartConnect Solar Kodpfxsya Rd Eo Afhjll Current location: AGRAVIS TECHNIK NORTHEIM

Condition: used, Year of construction: 2013, working width: 3,100 mm, Cutter bar: Disc | Used rear disc mower John Deere 331 Year of manufacture: 2013 Disc mower with steel tine conditioner Kledpoyaiw Rofx Afhel Vertically (to the rear) foldable Working width: 3.10 m Quick-change blade system 1000 rpm | Internal ID: 11361339

Condition: used, Year of construction: 2019, EASYCUT B 1000 CV COLLECT Krone Disc Mower Combination Technical Data: + Disc mower combination for three-point linkage with CV high-performance steel tine conditioner and cross conveyors + Working width: 2 x 3,600 mm + Working width in combination with front disc mower: 9,300–10,100 mm + Transport width: 2,950 mm + Two mower drums, six mowing discs (per mower unit) + Work output: approx. 10–13 ha/h + Power requirement from approx. 150 kW (200 hp), depending on crop conditions! + Own weight approx. 3,880 kg + Lower link pick-up Standard equipment mower frame: + Krone DuoGrip mower suspension + Adjustable collision protection + Hydraulic cutter bar relief, Combi Float + Outer and front mower guards, foldable + Hydraulic cylinders for working width adjustment integrated in boom arms + Automatic compliance with transport height of 4 m (with approx. 25 cm ground clearance) + Double-acting hydraulic folding mechanism + Space-saving parking in transport position Drive train: + PTO shaft and gearbox combination + Tractor-side PTO shaft (1 3/8", 6-spline) incl. overload clutch + PTO speed 1,000 rpm + Drive train with freewheel + PTO shaft lubrication interval: 250 h Cutter bar: + SafeCut disc protection system + SmartCut disc arrangement Klodpfxjx Uufkj Afhol + Lifetime lubrication + Fully welded + Large cutter bar cross-section + Hardened skid runners + Satellite drive + Blades fully swiveling through 360° Conditioner: + CV high-performance conditioner with V-shaped, forward-facing and hardened steel tines (diameter 64 cm) + Two-speed gearbox for conditioner + Conditioner baffle plate adjustable in 7 steps, tool-free + Side swath plates for quick conversion from wide to swath placement Swath formation: + Independently engageable cross conveyors, 910 mm wide with infinitely variable belt speed adjustment + Cross conveyor with internal frame (no wear-prone sealing needed, easy to change) + Adjustable cross conveyor baffle plate + Guide plates for wide spreading Additional equipment: + Removable knife box + Operation via pre-select control box and tractor hydraulic control valves, or via ISOBUS + LED lighting for light/brake lights and license plate panels + Standard/manual preselect operation for telescopic arm movement limitation + Required hydraulic connections: load-sensing system (P-T-LS) (independent folding of cross conveyors) + Rotation direction “A” (all discs rotate toward center), CV conditioner comes with performance-boosting (closed) conditioner tines + Quick-change blade system + Operator training for 2 participants: registration and possible dates via your KRONE service and sales partner (see S&P chapter for more info) + Swath accelerator rollers for forming particularly narrow swaths (operated manually) 2x DW + fast belt reversal

Condition: used, Year of construction: 2012, DISCO 9100 CONTOUR, used Claas butterfly mower, PTO shaft, lighting, 010 hydraulic suspension relief. Kledpex Twguefx Afhsl

Condition: used, DISCO 3200 F PROFIL used Claas front mower PTO shaft implement triangle relief springs Klodpfex Twgzox Afhsl

Condition: used, Year of construction: 2012, DISCO 9100 C AS Claas disc mower with conveyor belts Wear skids Kledjx Tbn Nopfx Afhol Outer protective covers hydraulically foldable Speed sensor for front mower Complete with front mower Disco 3100 FC Profil Active Float, hydraulic suspension Protective covers hydraulically foldable

Condition: used, Year of construction: 2018, Pickup basket_____Number of axles: 2Operating hours: 1755,Location: Customer Kljdpfx Aox Suumofhol

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter Ksdpfxsx R Uw So Afhell * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2024, Front Boom Mower MFK 500 Base Unit for Single- or Two-Man Operation * Mounting Plate: Suitable for front attachment plate size 3 or 5 * Right- and left-hand working possible * Boom swivel range: 190 degrees * Hydraulic collision protection with damping of the boom system via hydraulic accumulator * Hydraulic lateral movement of the boom by 1,800 mm * Engagable/disengagable float position for implement attachments * Quick-change system for implements * Safety Stop: Electric cutting shaft on/off from the control panel, incl. brake valve (cutter shaft run-down approx. 4 sec.) * Hour meter Klsdpox R Uwrsfx Afhsl * Park position for boom arm and implement in front of the carrier vehicle Proportional Control mlcontrol Permanent Hydraulics (CAN-Bus Technology) * Dual cylinder operation for simultaneous execution of multiple functions * Boom relief control Type AER: Infinitely adjustable contact pressure, can be engaged/disengaged * Operator information system with TFT color display, incl. system monitoring and diagnostic help * mltronic relief control: Computer-assisted contact pressure control for the mower head using travel/force sensors * Switchable to boom relief control Type AER (only with certain mower heads) mlbasic Multifunction Joystick * One-hand control panel with multifunction joystick Implement Drive & Hydraulics * Front PTO for implement drive * Hydraulic pump for implements: 62 l / 340 bar * Oil fill: Mineral oil HLP 46 (only with implement drive via front PTO) Boom System * Telescopic boom: Hydraulically adjustable, reach extendable by 1,000 mm (max. 7.00 m from vehicle center, for Unimog from U400-U500 / U318-U535) Additional Equipment * Valve (single electric-hydraulic switching): Switchable from control panel, for additional hydraulic double function * Hydraulic rotation device: Swivel range 230°, integrated on boom side, incl. quick-change plate, can be used with multiple implements * Hydraulic quick couplers: Kit for flat-sealing quick couplers on the mower * Paint: Orange RAL 2011, low-emission (2-component paint process) Mower Head MK 1200 plus * Working width: 1,200 mm * Cutting thickness: Max. 20 mm * Incl. debris guard Other Notes: * Trade-ins and purchase of vehicles and machines possible. * Sale price does not include transport. * No liability for print or typographical errors. * Subject to error, change, and prior sale. * Offer non-binding. * Photos may differ. Price applies to the condition as is. * All details provided without guarantee. Further Information New: No

Condition: used, Year of construction: 2017, DISCO 3150 F Claas front disc mower DISCO 3150 F in standard specification with PTO shaft, working width 3 m, PTO drive 1,000 rpm. Ksdpfx Afjx R N Nvehjll

Condition: used, Year of construction: 2023, operating hours: 80 h, CLIMBER 10 AWD 22 (0010) Grillo Climber 10.22 AWD Ride-on Mower (0020) Engine: Briggs & Stratton Series 7220 (0030) Commercial 18 (0040) HP/13.2 kW (0050) Petrol engine, displacement 656 cc, 2 cylinders (0060) Air-cooled (0070) Transmission: Hydrostatic transmission with (0080) All-wheel drive Kljdpfxex R Nurj Afhel (0090) Mower deck: Side and rear discharge (0100) Cutting width 930 mm (0110) Cutting height: from 35 mm to 135 mm, (0120) Stepless (0130) Height adjustment (0140) Speed: from 0 to 9 km/h (0150) Infinitely variable and (0160) Reverse gear from 0 to 8 km/h (0170) Inner turning radius 70 cm (0180) Dimensions: L 2060 x W 1030 x H 1185 mm (0190) Weight: 345 kg

Condition: used, Year of construction: 2016, operating hours: 80 h, FD 220R Klodox R Nrdepfx Afhel

Condition: used, Year of construction: 2025, USM-18 (0010) Dücker - Uni-Side Mower USM 18 (0020) Walterscheid PTO shaft with freewheel (0030) 540 rpm drive (0040) Hydraulic side adjustment 60 cm (1 (0050) double-acting control valve required) (0060) Large touch roller + increased mower housing (0070) Reinforced version: shaft, bearings, (0080) Flails 555 free-swinging (0090) High-strength wear-resistant plastic (0100) (replaceable) mounted in the mower hood (0110) Wear protection hood made of steel instead of (0120) Plastic Klodpfsx R Nqtjx Afhsl (0140) Made of high-strength plastic (0150) Replaceable, mounted in the mower hood (0160) 6-groove power band (0170) Instead of the standard V-belts

Condition: used, EXTRA 336 0010 VICON Ksdpox R Na Isfx Afhjll 0020 Year of manufacture: 2018 0030 EXTRA 336 0040 Working width: 3.5 m 0050 Year of manufacture: 2021 0060 Manufacturer: Vicon 0070 Vertical position: yes 0080 Internal number: 12985 0090 Model: extra 336 0100 Cutter bar: Disc 0110 Swath board: yes 0120 10 mowing discs 0130 Condition: Used machine 0140 PTO shaft

Condition: used, Year of construction: 1996, DISCO 260 C Claas rear mower in series Tine conditioner Mechanical relief of contact pressure Wear skids Working width 2.60 m Ksdex R I I Djpfx Afhsll

Condition: used, Year of construction: 2002, DISCO 3050 Kledpsx R I Nbofx Afhsl (0010) Used Claas mower Disco 3050

Condition: used, Year of construction: 2018, PRO GLIDE F3100 Kledpfx Ajx R Ix Nsfhsl Used McHale Pro Glide F3100 Front-mounted PTO shaft Tine conditioner Mechanical suspension pressure relief

Condition: used, Year of construction: 2018, PRO GLIDE R3100 used Mc Hale disc mower Pro Glide R 3100 Kodpfxox R Ixvs Afhsll rear-mounted hydraulic folding device PTO shaft lighting system with warning panels tine conditioner

Condition: used, Year of construction: 2013, -AUCTION MACHINE-- ab-auction DRUMMASTER 432F used Deutz-Fahr front drum mower PTO shaft You can place bids online for this machine The starting price is 500.00 EUR excl. VAT. Kledpfx Asx R I Epsfhol Register for free and take part in the auction. Click here to access the auction: ----- ----- Exciting online auction! Start bidding now! ab-auction

Condition: used, Year of construction: 2008, DISCO 3100 F PROFIL, used Claas front mower in series, PTO shaft, mechanical suspension Klsdpfxox R Iphe Afhel

Condition: used, KM 166 Saphir mower, working width = 1.65 m, drum mower, 3-point linkage, Kljdpfx Aex R Idlsfhsl

Condition: used, Year of construction: 2018, DISCO 1100 C BUSINESS Used Claas mower Telescopic working width adjustment Conditioner Warning signs with lighting Kljdpfxjx R H Uco Afhsl Conditioner DISCO 3200 FC PROFIL Used Claas mower with conditioner PTO shaft Warning signs with lighting

Condition: used, Year of construction: 2016, operating hours: 1,168 h, working width: 9,100 mm, DISCO 9200 C BUSINESS Used Claas large-area mower Additional wear skids Wide spreading device COMMUNICATOR II Speed monitoring and pressure display digital, front mower (2 units) ACTIVE FLOAT system adjustment, front section 010 Claas front mower Disco 3200 FC Profil 020 Year of manufacture 2016 030 Additional wear skids Ksdpfsx R H E Iex Afhjll

Condition: used, Year of construction: 2017, working width: 3,800 mm, DISCO 4000 CONTOUR used Claas disc mower standard equipment external swath disc, pivotable and spring-mounted Kjdpfex R H Enex Afhjll additional wear skids

Condition: used, Year of construction: 2017, working width: 3,000 mm, DISCO 3150 F used Claas disc mower in standard specification Kljdpfox R H Ehox Afhol wear skids (set)