Jaweed GmbH

Year of construction: 2019, condition: used, Lifting capacity: 295 kg Please contact Gebrauchtgeräte Center for more information Iiodpfszfnagsx Ah Roc

Year of construction: 2015, condition: used, Lifting capacity: 295 kg Please contact Gebrauchtgeräte Center for more information Iiodpfszfmz Ajx Ah Roc

Year of construction: 2006, condition: used, Lifting capacity: 295 kg Isdpfx Ahozfmctj Reic Please contact Gebrauchtgeräte Center for more information

Year of construction: 2013, condition: used, Please provide reference number upon request: 19343 Specifications: Model year: 2013 Capacity: 0.7 m³ For truck mounting With broom Iiedpfx Ahozffr Hj Rec Ready for delivery Own weight: 1 Model: CH-K Kantlegger. = More information = Serial number: D130xxxx Please contact ATS Norway for more information

Year of construction: 2015, condition: used, Please provide reference number upon request: 23748 Specifications : 2015 model Isdpozffp Sofx Ah Rsic Max temp: 60C Works as it should Ready for delivery. = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2022, operating hours: 4,235 h, Please contact Kurt Meurrens , ) for more information. Isdpfx Ahszffdie Roic

Condition: used, Year of construction: 2022, operating hours: 4,739 h, Please contact Kurt Meurrens , ) for more information. Iiedpfxezffdpe Ah Rjc

Condition: used, Year of construction: 2018, operating hours: 2,340 h, Please contact Kurt Meurrens , ) for more information. Iedpfx Ajzffd Aeh Rsic

Condition: used, Year of construction: 2015, * 8769 - Vehicle ID for telephone inquiries * Hand sweeper Oertzen Lion 8000 MH Ijdszd Nfbepfx Ah Roic * Like new, only approximately 5 operating hours * Year of manufacture: 2015 * 1-cylinder Honda GC160 gasoline engine, 4 hp * Self-propelled via belt drive * Sweeping roller at the bottom + side brushes * Dust filter * With electric dustpan function * Compact sweeping container for easy emptying into the garbage bin * Delivery throughout Germany possible upon request! ----Our email address: Our service for you: - Procurement of short-term or customs license plates - Transfer / delivery throughout the EU - Customs clearance of vehicles to third countries If you have any questions in Russian, you can call the following number: * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Condition: used, Roll-off container with crane Overall length: 5,500 mm Platform length: 4,500 mm Aluminum side panels, 900 mm high Reinforced steel plate floor Iedszd Nalspfx Ah Rjic Tie-down points Crane: MKG HLK 105 2 telescopic sections Outreach: 7,760 mm / Lifting capacity: 1,320 kg Hydraulic outriggers at the front

Condition: used, Please provide reference number upon request: 23732 Specifications: Year: unknown Iisdozdx S Repfx Ah Roc S60 attachment Digging bucket Stored outdoors Ready for delivery Description: Nasta digging bucket with S60 attachment. Year of manufacture is unknown. The bucket is stored outdoors and is ready for delivery. = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2022, operating hours: 4,222 h, - 6x6 Tailgate Air conditioning Camera More information Type: Dumper Ijdpfx Ahszdxxds Rjic Chassis type: articulated Please contact Kurt Meurrens , ) for more information

Condition: used, Year of construction: 2022, operating hours: 2,060 h, Please contact Kurt Meurrens , ) for more information. Ijdozdxxkepfx Ah Roic

Condition: used, Year of construction: 2022, operating hours: 49 h, * 5821 - Vehicle ID for telephone inquiries * Nilfisk SC6500 / 1100C Ride-on Scrubber * Only 49 hours of operation! LIKE NEW!!! * Year of manufacture: 2022 * MSRP: approx. 48,900,- Euro Isdpfezdxwmjx Ah Rsic * The Nilfisk SC6500 ride-on scrubber is ideally suited for cleaning warehouses, large supermarkets, airports, parking lots, the food industry, and heavy industry. * The Nilfisk SC6500 has a cylindrical brush deck (roller brush head) with a 100cm working width. The machine offers a long operating time of up to 5 hours with a fully charged battery. * Productive: New, quiet AC drive with improved driving and working speed of 9 km/h. * Easy to maintain: New maintenance-free motor, high-quality gearbox, and yellow-marked maintenance points. * User-friendly: One-touch operation, color-coded keys and maintenance points. * Sustainable cleaning with the Ecoflex system: Complete control of water and detergent consumption with just one button. * Tank capacity: 265 l * Easy to handle: Optimized locking mechanism for the dirty water tank. * Better control and ergonomics: Optimized steering force and ergonomically adjustable steering column. * TECHNICAL DATA: * Operating voltage: 36V * Max. driving speed: 9 km/h * Dimensions (L x W x H): 1870x1210x1480mm * Brush speed: 630 RPM * Fresh/dirty water tank: 265l / 265l * Battery capacity: 480Ah * Shipping weight: approx. 1,320kg * Brush pressure: 38/54/90kg * Working width: 1000mm * Turning radius: 214cm * Max. gradient: 10.5-16% * Area performance theoretical/practical: 9000/6300 sqm * IP protection class IP3X * Flow rate fresh water pump min./max.: 3.1-9.4 L/min * Noise level: 70 dB(A) * Suction motor power: 560W - 3-stage * Drive power: 1,400W * Max. operating time: 5h * Brush motor: 2x1,120 W * Squeegee, width: 125cm * Number of brushes / brush type: 2 cylindrical * One-touch operation * Reverse alarm * Drain hose, crushable * Automatic lifting of the squeegee when reversing * "Break-away" squeegee suspension * Squeegee lips, 4-fold use * Roller brush deck * Ecoflex compatible * Squeegee * Delivery throughout the country possible on request! ----our email address: our service for you: - Procurement of short-term or customs license plates - Transfer / delivery throughout the EU - Customs clearance of vehicles to third countries If you have any questions in Russian, you can call the following number: WhatsApp just for Russian speakers: Whatsapp for English, German and other languages:

Condition: used, Year of construction: 2000, operating hours: 10,900 h, WhatsApp: _____ Willibald MZA 3500 / Shredder / Chipper / Crusher ? Manufacturer: Willibald ? Type: MZA 3500 ? Year of manufacture: 2000 ? Operating hours: 10,900 hours ? Engine: MAN D 2876, 6-cylinder diesel ? Power: 308 kW / 418 hp ? Inlet: 500 mm ? Number of axles: 2 tandem axles ? Braking system: Air pressure ? Number of hammers: 48 ? Rotor speed: 1300 rpm ? Tow hitch: 40 mm ? Fiberizing of organic material for composting, up to a diameter of 30 cm ? Shredding of old wood and waste wood, up to a diameter of 30 cm ? Total weight: 16,000 kg ? German machine ? Immediately ready for use _____ You can also receive the description in another language by email. ? Our services: ? ? - Export declaration, customs registration, yellow temporary license plates, red customs license plates. ? - Purchase of your used construction machinery or commercial vehicle. ? - We will help you with financing. ? - We offer you transport solutions. ? - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturday by appointment only). ? ? Our pool of machines is constantly changing and is always up-to-date on our website. ? ? ? ? We are also available by telephone. ? ? Sanisa GmbH ? Otto Hahn Straße 13 ? 35510 Butzbach ? ? Tel: ? Mobile: ? This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our general terms and conditions. Iijdpozdw S Njfx Ah Rjc

Condition: used, mileage: 14,800 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 09/2017, emission class: none, suspension: other, Year of construction: 2017, driver cabin: other, fuel: electricity, Control unit defective! We buy or take in trade: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional fee A visit is possible without prior registration: Mon - Fri: 08:00 to 17:00 Sat: 9:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: More information can be found on: We speak German / English / Russian / Italian / French / Spanish More Information Iiodpfezdvwqsx Ah Roc Sales only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Year of construction: 2019, condition: used, Please provide reference number upon request: 23639 Specifications: 2019 model Engine hours: 1700 hours Impact hours: 639 hours COP 1640+ Hammer Weight: 10,500 kg 116 kW Grinding equipment Safety cage Diesel heater Laser receiver Engine: Cummins QSB 4.5 Tier 4 final Winch Iijdpfx Ahjzdpkwj Rec Carousel Rod handling Coarse separator Central lubrication T38 Radio control Gas refueling equipment for accumulator Lights Ready for delivery Description: We have an Atlas Copco T30R-03 Flexiroc with COP 1640+ hammer, grinding equipment, and water mist for sale. The rig has some sensor faults on the angle gauge and position error on the hammer during rod changes. These sensors need to be replaced. Aside from this, the rig functions as it should. All services have been performed by Epiroc. Ready for delivery. Own weight: 10500 Engine hours: 1700 Model: FlexiRoc T30R-03 m/COP 1640+ hammer, slipe apparat og watermist = More information = Serial number: TGM18SED070078992 011xxxx Please contact ATS Norway for more information

Year of construction: 2021, condition: used, Please provide reference number upon request: 23647 Specifications: 2021 model 4 seats Refrigerator with microwave Toilet Isdpfx Aezdpkqsh Rsic Storage room with heating Panel heaters Ready for delivery Description: We have a 2021 Respo 420 trailer for sale. The trailer is in good condition and has been hardly used. Ready for delivery. = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2026, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Operable on bog areas, forest paths, tracks, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Side slope capability up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven ground ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear-view camera ? LED work lights Ijdpfxozdl R Te Ah Reic ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing system ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in bog and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to the extremely low ground pressure, the high payload and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, various mounting elements from Krings KS60 and TWF, immediately available. Iodpfszdl Ewjx Ah Reic Mobile:

Condition: new, functionality: fully functional, power: 25.74 kW (35.00 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,500 kg, suspension: hydraulics, Year of construction: 2026, Hydraulic Winch Brake, 5 Tons, OMAC F120.50 (T50.2) – Puller-Tensioner, 50 kN for Overhead Line Construction, OPGW, and Cable Laying Iiedpfx Ahszdfdnj Rsc For sale is a professional hydraulic winch brake, OMAC Italy F120.50 (T50.2), for overhead line construction, cable laying, network construction, catenary construction, and the installation of medium and high-voltage lines. The machine is designed for tensioning, braking, and pulling one or two conductors as well as OPGW / fiber optic cables. Thanks to the hydraulic circuit, the winch brake can operate with constant force – both in braking mode and in winching mode. This makes the machine ideally suited for controlled operations during the construction, modernization, and maintenance of overhead lines and energy infrastructure. The OMAC F120.50 is a robust solution for energy suppliers, network construction companies, overhead line construction companies, cable laying companies, railway technology companies, catenary construction companies, and specialized installation companies. Technical data: * Manufacturer: OMAC Italy * Model: F120.50 (T50.2) * Machine type: Hydraulic winch brake / puller-tensioner / cable winch * Application: Overhead line construction, OPGW, cable laying, catenary construction * Winches / drums: 2 × Ø 1500 mm * Maximum conductor / cable diameter: 1 × 36 mm * Max. braking force: 50 kN / approx. 5 tons * Min. braking force: 2 kN * Max. speed in braking mode: 5 km/h * Max. pulling force in winching mode: 50 kN / approx. 5 tons * Min. pulling force in winching mode: 2 kN * Max. speed in winching mode: 0.8 km/h * Weight: approx. 2500 kg * Dimensions: approx. 395 × 200 × 240 cm Equipment and advantages: * Hydraulic winch brake for tensioning one or two conductors or OPGW * Constant braking and pulling force even with varying working speeds * Motor for retraction power * Strain control device for low forces 2–20 kN, suitable for fiber optic / OPGW * Load cell reading system * Control panel with large color graphic display * USB port for data storage * Display of pulling force, speed, and cable length in real time * Adjustment of the maximum pulling force * Working time and data recording * Safe hydraulic brake * Rear cable guidance with nylon rollers * Chassis with solid axle, handbrake, and detachable drawbar for slow towing on the construction site * Mechanical front support and rear stabilizers * Anchoring and lifting accessories * Heat exchanger for oil cooling in the hydraulic circuit * Additional hydraulic circuit for controlling 1 or 2 reel stands * Grounding point Options depending on configuration: * Spring axle, air brake, drawbar, and lighting for road transport * PVC protective cover * Cable remote control 10 m * Radio remote control up to approx. 50 m * Automatic clamps for 2 conductors * Manual clamp for 2 conductors * Electronic recorder with accessories The OMAC F120.50 hydraulic winch brake is ideal for professional users looking for a powerful 50 kN machine for overhead line construction, OPGW installation, cable pulling, cable laying, and energy infrastructure. Technical advice, availability, and individual offers available upon request. Intra-community delivery net without VAT is possible with a valid VAT ID. Other versions available upon request.

Condition: used, Year of construction: 2019, operating hours: 3,097 h, Please contact Kurt Meurrens , ) for more information. Iiodpfx Aezdbiteh Rec

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,400 kg, power: 55 kW (74.78 HP), fuel type: diesel, gearing type: automatic, Overhead Line Construction Winch 80 kN OMAC Italy P80 – hydraulic cable pulling winch / rope winch for overhead line construction, catenary construction, line construction, network construction, and underground cable construction. The machine is designed for pulling steel cables and synthetic ropes during the installation of overhead lines, medium-voltage lines, high-voltage lines, catenary lines, underground cable routes, and infrastructure lines. The hydraulic drive with stepless speed control in both directions enables precise and controlled work on the construction site. Technical data: * Manufacturer: OMAC Italy * Model: F230.70 * Pulling force: 80 kN / approx. 8 tons * Diesel engine: 74 hp / 55 kW * Water cooling * Electrical system: 12 V / 24 V * Maximum pulling speed: 1.6 km/h * Maximum speed: 4.5 km/h * Trailer load at maximum speed: 28 kN * Winch heads: 2 × Ø 400 mm * Capstan grooves: 8 * Rope diameter: 18 mm * Connection diameter: 50 mm * Weight: approx. 2400 kg * Dimensions: approx. 320 × 195 × 200 cm Standard equipment includes a hydraulic brake, electronic pull force monitoring DEG 4.0 with a 7-inch color display and USB port, load cell reading system, pull force limitation, chassis with solid axle, hand brake, detachable drawbar, hydraulic rear stabilizers, manual front stabilizers, anchoring and lifting accessories, and a heat exchanger for oil cooling. Options depending on the equipment: cable remote control 10 m, radio remote control up to 100 m, automatic or manual rope clamp, hydraulic front stabilizers, printer, rope guide sheave 360°, equipment for low temperatures down to -30°C, chassis with sprung axle and overrun brake. Ideal for energy suppliers, network construction companies, overhead line construction, catenary construction, cable laying, underground cable construction, line construction, railway technology, and infrastructure projects. Robust 80 kN winch / cable pulling winch for professional use on construction sites. Iodpfxezc Uvds Ah Reic Intra-community delivery net without VAT is possible with a valid VAT ID. Application areas: Overhead line construction Catenary construction Energy supply Network construction Cable laying Underground cable construction Medium-voltage lines High-voltage lines Infrastructure projects Line construction Railway and overhead contact line construction

Condition: new, Year of construction: 2026, overall weight: 1,300 kg, fuel type: diesel, color: grey, Equipment: hydraulics, Universal Winch 50 kN OMAC Italy P50.U / F280.50 – hydraulic cable pulling winch for overhead line and underground cable construction For sale is a professional universal winch from OMAC Italy, model P50.U / F280.50, with a maximum pulling force of 50 kN, equivalent to approximately 5 tons. This machine is designed for demanding tasks in overhead line construction, underground cable construction, cable pulling, line construction, network construction, overhead contact line construction, and for use by energy suppliers. The hydraulic winch is particularly suitable for pulling a single steel cable or plastic cable during the installation of overhead lines, medium-voltage lines, high-voltage lines, underground cables, and infrastructure lines. The hydraulic drive allows the pulling speed to be continuously adjusted in both directions. This enables controlled, safe, and precise work on the construction site. The machine is equipped with two winch drums, Ø 325 mm, and is suitable for cables with a maximum diameter of 16 mm. The robust construction, the powerful diesel engine, and the hydraulic brake make this winch a reliable solution for professional users in the energy and cable industries. Key technical data: * Manufacturer: OMAC Italy * Model: P50.U / F280.50 * Machine type: Universal winch / hydraulic cable pulling winch / overhead line winch * Maximum pulling force: 50 kN / approx. 5 tons * Max. speed: 3.6 km/h * Drive: Diesel engine * Engine power: 48 hp / 36 kW * Winch drums: 2 × Ø 325 mm * Maximum cable diameter: 16 mm * Weight: approx. 1300 kg * Dimensions: approx. 215 × 160 × 155 cm * Continuously variable speed control in both directions * Hydraulic brake * Chassis with solid axle, tires, handbrake, and trailer coupling for slow towing * Hydraulic rear stabilizer * Manual front stabilizers * Equipment for anchoring and lifting * Heat exchanger for the hydraulic circuit Cable capacity: Ijdpfx Ajzc Ungeh Rjic * Ø 16 mm – approx. 850 m * Ø 14 mm – approx. 1100 m * Ø 12 mm – approx. 1500 m Application areas: * Overhead line construction * Underground cable construction * Cable laying * Network construction * Energy supply * Medium-voltage lines * High-voltage lines * Overhead contact line construction * Infrastructure and line construction * Pulling steel cables and plastic cables Optional equipment, depending on configuration: * Remote control with cable * Remote control with potentiometer for speed control * Radio remote control * Printer with accessories * System for setting and limiting the maximum pulling force * Hydraulic stabilizers on the pulling side * Motorized rubber track system * OMAC Link System with GPS positioning, remote monitoring, and remote diagnostics * Electronic data logger / pulling force recording with USB port The universal winch P50.U is an excellent solution for companies looking for a robust, compact, and powerful 50 kN cable pulling winch for professional use on construction sites. It combines high pulling force, easy operation, precise hydraulic control, and proven OMAC technology. Sales to commercial customers within the EU are possible at a net price without VAT, provided a valid VAT identification number is available, in accordance with intra-community trade regulations.

Condition: used, Year of construction: 2008, operating hours: 3,259 h, Equipment: all wheel drive, ASTRA ADT 30 | 6x6 | Cummins | 47,000 Kg | Dumper | Ijdpfx Ahozc T Ewe Reic ? Year of manufacture: 2008 ? Cummins diesel engine – 200 kW / 272 hp ? Operating hours: 3259 ? Articulated joint ? Automatic transmission ? All-wheel drive, 6x6 ? Unladen weight: 20,160 kg ? Payload: 27,000 kg ? Permissible total weight: 47,160 kg ? Volume: 17 m3 ? Front tires approx. 30% tread ? Middle tires approx. 30% tread ? Rear tires approx. 30% tread Axle 2 broken / wheel hub. Subject to changes and errors.