CLAAS Südostbayern GmbH

Condition: new, Year of construction: 2024, EVO 165 D (0010) GreenMech Trailer Chipper (0020) Powered by Kubota diesel engine, 25 HP / (0030) 18.4 kW (0040) 4-cylinder V 1505, 2300 rpm torque (0050) 90 Newton meters. (0060) Emission level Stage V - EU Stage 5 (0070) Feed opening 220 x 165 mm (0080) Heavy flywheel with 101 kg ensures (0090) stepless regulation (0100) of the speed of the horizontal (0110) feed rollers (0120) Discharge chute rotatable 280° (0130) Fuel tank and oil tank, each with 33 liters (0140) 4 disc chipper knives on the (0150) flywheel. (0160) Spare wheel 165/80/R13 as standard. (0170) Overload protection / No Stress control. (0180) Weight: 1000 kg, transport length: 3500 mm (0190) Width: 1515 mm, height: 2600 mm (0200) Sound power level LwA = 114 dB(A) (0210) Sound pressure level LpA = 94 dB(A) (0220) Powder coating in custom color (only RAL color tones) available at extra cost (0240) Optional: height-adjustable drawbar (0250) Illumination in the feed table (0260) Bio-oil - Panolin. Ffjdpfox R Nvcex Aa Rjt

Condition: used, Year of construction: 2023, SABO 45-A Classic used SABO lawn mower 45-A Classic Used goods special scheme. Sale is conducted pursuant to §25a German VAT Act – margin scheme. VAT not shown separately. Ffedpfx Aox R H Ddja Ret

Condition: new, Year of construction: 2023, SSP 450 D AUTOMATIC ECO Binderberger saw-splitter automation Fully automatic control Loading conveyor 4 m Short drawbar, unbraked axle Oil cooler, electric throttle adjustment Feeder stand 2 m Hydraulically foldable with wood rack Hydraulic preparation for cross conveyor installation Splitting cross 12-way Fedpfex R Hkqsx Aa Reft Extended drawbar

Condition: used, Please provide reference number upon request: 21931 Specifications: Year model uncertain Weight: 1785 kg 400 volts Ready for delivery Description:Trenchin SN 50 C lathe with some equipment.The lathe has seen little use and has been well maintained.Ready for delivery. Ffodpfx Aajx Anb Ss Rst Own weight: 1785 = More information = Please contact ATS Norway for more information

Year of construction: 2015, operating hours: 3,500 h, condition: used, Please provide reference number upon request: 21919 Specifications: Ffsdpoxz N Azsfx Aa Rot 2015 model Approx. 3,500 hours 119 kW Operating weight: 9,740 kg Undercarriage (see photos) Track width: approx. 50 cm Machine width: approx. 200 cm Prinoth M550 from 2019 Rear-view camera Good working lights Radio/CD Climate control/AC Description:Prime Tech self-propelled mulcher from 2015.The mulcher is in good working condition and has no known faults.It has approx. 3,500 operating hours.Can be delivered at short notice.See video! Hours: 3500 Own weight: 9740 Model: PT-175 dyrkningsfres SE VIDEO = More information = Serial number: 0xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2005, Equipment: cabin, had accident, ref: 250639 ! Damaged Equipment / Matériel accidenté / Verunglücktes Material ! Reference: 250639 Type: ROUND BALER Brand / Model: CASE RBX 452 Fsdpfsxyltysx Aa Rsft Year: 2005 ! Damaged equipment ! - Incident details: Rollover - Procedure: VEI (Vehicle Seriously Damaged) with expert assessment follow-up Damaged equipment sold as-is, sale to professionals or for export only. ! Please note: vehicles are sold without any guarantee, trade-in, exchange, refund, or claim after the sale!* Sale price excluding VAT. Delivery possible at additional cost to the sale price. More information and photos available on our website! Please make an appointment so we can welcome you under the best conditions! Our company specializes in buying and selling equipment and has a machinery yard of over 100,000 m2 south of Strasbourg. We stock over 350 items of equipment including construction machinery, material handling, agricultural equipment, trucks, passenger vehicles, and commercial vehicles, with inventory renewed every month. We look forward to welcoming you at 17 Route d’Eschau, 67400 ILLKIRCH-GRAFFENSTADEN. *Description subject to error Delivery time (in days): 1

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,100 h, Technical specifications: Year: 2023 Working hours: 1100 h Required tractor power: 150–330 HP Crane: M70F101 Palfinger Epsilon, 10.1 m reach Infeed opening: 1200 x 600 mm Drum diameter: 660 mm Drum type: Evolution with 5 knives Capacity: Up to 100 m³/h Infeed table width: 2000 mm Infeed conveyor width: 1200 mm Infeed conveyor length: 2200 mm Hydraulic discharge fan Screens + knives included in the package Condition: Ffedpfx Aoxwl N Noa Rot Fully working, no defects Ready for immediate operation Regularly maintained Additional information: PTO-driven Suitable for professional biomass companies, contractors and large-scale wood processing

Condition: new, Year of construction: 2023, OL 100N NEW OL 100N – Log Splitter Series "2019" 10 t splitting force – Electric 400 Volt Fsdoxvfm Sspfx Aa Rsft Drive system: 400 V Power: 3.5 kW / 4.8 HP Design: vertical Splitting length: 560 mm Splitting force: 10 t Dimensions: 1540x1300x850 mm Weight: 142 kg

Condition: new, Year of construction: 2025, GI 40 EZ 0010 GI40 EZ electric motor 5.5 kW + 2.2 kW / 400V / 32A and Fedpfoxu R Ewsx Aa Roft 0020 PTO drive 540 rpm 0030 Splitting force: 40 t 0040 Splitting length: 125 cm 0050 Standard two-hand operation 0060 Lifting basket 0070 Oil cooler 0080 Lighting according to road regulations. 0090 Splitting cross, 16-times welded 0100 Chainsaw and logging hook holder

Condition: new, Year of construction: 2025, GI 20 EZ SUPERSPEED 0010 GI20 EZ superspeed electric motor 5.5 kW + 2.2 kW / 400V / 32A 0020 + PTO drive shaft 540 rpm 0030 with chassis, with return and transport conveyor chain 0040 Splitting force: 20 t 0050 Splitting length: 125 cm 0060 Standard two-hand operation 0070 Lifting basket 0080 Four-way welded splitting cross 0090 Cable winch with remote, 750 kg pulling force, 35 m cable and grab tongs 0100 Oil cooler Ffjdpfx Aexu R E Doa Ret 0110 Chainsaw and cant hook holder 0120 Walterscheid PTO shaft BG4, 1010 mm

Condition: new, Year of construction: 2025, H12 Z SUPER SPEED 0010 Log splitter H12 Z superspeed, PTO 540 rpm 0020 Splitting force: 12 t 0030 Splitting length: 115 cm 0040 Speed Control Fedpfx Aaoxu R Hbe Roft 0050 Rotary table 0060 Mechanical log lifter 0070 Standard two-hand operation incl. wood clamping system

Condition: new, Year of construction: 2025, H10 Z ECOSPLIT 0010 Log splitter H10 Z ecosplit, PTO drive, 540 rpm 0020 Splitting force: 10 t Ffsdjxu R Hhjpfx Aa Rot 0030 Splitting length: 115 cm 0040 Mechanical log lifter

Condition: new, SP8 E 0010 New log splitter SP8 E, electric motor 4 kW / 400V / 16A 0020 Splitting force: 8 t 0030 Splitting length: 55 cm 0040 Log diameter: 40 cm 0050 With two-hand operation 0060 4-way splitting wedge 0070 Transport trolley Fedpfexu R E Rjx Aa Rsft 0080 Stepless height-adjustable splitting wedge

Year of construction: 2011, condition: used, Selling price: € 15.000, US$ 17.450 Ffodpfjxt Sv Isx Aa Rot

Condition: used, Year of construction: 2023, BIBER 3-21 PTO Eschlböck Wood Chipper Weight approx. 1080 kg Standard Features Maximum wood diameter: 21 cm Feed width: 24 cm Disc chipper with Chipping disc diameter: 93 cm 3 chipping knives, 28 mm, re-sharpenable Counter knife + 2 lateral counter knives (wear and angle protection), reversible/two-way usable Grinding wheel mounted on the machine Independent hydraulic circuit Hydraulic tank: 35 liters 2 hydraulically driven hardened feed rollers 2 hydraulic motors and parallel mounting Hydraulic oil level and temperature display Chipping length adjustment Chipping length: 1 to 3 cm, adjustable electro-hydraulically 2 x 3 exchangeable stop plates in the disc and post-shredding comb for precise wood chips Smart Control Operator-guided control with visualization of feed speed, adjustable chipping length, and overload automatic system, incl. hour meter (daily and total hours) Mode selection for desired chip quality Safety features for manual feeding 2 control strips and one stop strip, release buttons and emergency stop on both sides Discharge chute 270° continuously rotatable with adjustable discharge flap, operable from the ground Ffsdpjxpkz Ijfx Aa Rjt Discharge height from ground: 3250 mm Drive via PTO shaft (30 up to max. 80 kW) PTO speed: 540, 750, 1000 PTO shaft with overload and freewheel clutch 3-point linkage Finish RAL 3020 traffic red RAL 7015 slate grey - Ex works Prambachkirchen / Austria - The following documents are supplied: - Operating manual - Spare parts list - Declaration of conformity - Tool kit Lighting for 3-point linkage

Condition: used, Year of construction: 2023, -AUCTION MACHINE-- ab-auction Ffjdpfx Ajxpk Axja Rjt BIBER 6 ON CHASSIS ESCHLBÖCK WOOD CHIPPER Screen: 3 cm Single axle, 25 km/h, incl. lighting Top hitch Tire size: 10.0/75-15.3 10 PR Weight (standard version): 2,650 kg Standard equipment: Chipping system: Drum chipper Maximum wood diameter: up to 32 cm Feed opening: 32x49 cm Feed chain conveyor: 0.5 m long Feed table: Total length incl. foldable tray: 153.5 cm Feeding height: 73 cm Side feeding Drum with 4 quick-change blades Counter-blade (two-part, reversible) Drum diameter: 534 mm Easily changeable screens Chip length: 2, 3, 4 or 5 cm Comes standard with 1 installed screen for desired chip length Independent hydraulic circuit with 90 L hydraulic tank, incl. level and temperature indicator for hydraulic oil 1 hydraulically pre-pressing feed roller and 1 chain conveyor Continuously adjustable feed speed Safety features for manual loading 3-sided stop bar at the feed hopper Dual-sided release keypad and emergency stop Reverse function at control panel Sturdy transparent protective curtain Smart Control: Operator-guided control of feed speed incl. visualization, adjustable chip length, and overload protection (no stress), operating hours counter (daily and total) Discharge: 2 discharge augers Blower diameter over 1 m Discharge chute infinitely variable up to 280 degrees, with adjustable discharge flap operable from the ground Discharge height from ground: 355 cm Drive: via PTO (approx. 40 kW up to max 100 kW) PTO speed: 540 rpm Belt drive Drive shaft with overload and freewheel clutch Paint: RAL3020 Traffic Red The tractor must be equipped with a power socket (for forestry plug, 3-pin) to ensure interference-free power supply for the chipper. You can place bids on this machine online. The starting price is EUR 13,900.00 excl. VAT. Register for free and start bidding. Go to the auction here: ----- ----- Exciting Online Auction! Start bidding NOW! ab-auction

Condition: used, Husqvarna ride-on mower LTH 135 used Husqvarna ride-on mower LTH 135 Fjdpexpaaasfx Aa Roft in standard equipment Used items special regulation. The sale is carried out according to §25a VAT Act – margin scheme. VAT is not deductible/showable.

Condition: used, Please provide reference number upon request: 21529 Fjdpfx Aaoxm Tfdj Rsft Description: We have a Topcon fc 5000 and hiper sr w/charging, case and pole for sale. GPS has a top network and service agreement that can be transferred upon sale, according to the owner. Everything works as it should. Ready for delivery = More information = Serial number: 10641xxxx Please contact ATS Norway for more information

Condition: new, Year of construction: 2022, BOSCHERT SP 1030 Boschert laminated wood splitter SP 1030 in standard equipment, PTO drive max. log diameter approx. 80 cm, splitting pressure approx. 30 t splitting force at the blade over 50 t 25 km/h chassis with lighting Cutting edge horizontally fixed approx. 10 cm Cutting vertically adjustable approx. 8-14 cm Ffjdpfxjxmltte Aa Rst Wear-resistant splitting blade made of Hardox 400

Condition: new, Year of construction: 2023, SP8 E Binderberger short log splitter horizontal in standard equipment 8t splitting force 55cm splitting length Ffjdpfx Aaoxaqrhj Rst 40cm log diameter 2-hand operation 4-way splitting cross Splitting cross infinitely height-adjustable 4KW electric motor / 400V / 16A Forward speed: 9cm/sec. Reverse speed: 13cm/sec. Transport trolley Weight 225kg

Condition: new, Year of construction: 2023, X-SPALTER D Binderberger Log Splitter Diesel engine 18.9 kW Hatz 2-cylinder air-cooled Splitting force 16 t Ffjdpfxow Szauo Aa Rst Log length 20-50 cm Log diameter 15-80 cm, 3-10 cm 8-step adjustable Cycles/min 14 (with 33 cm log length) Hydraulic tank capacity 200 l Standard equipment: 2-stage splitting blade Oil cooler Weight: 3,200 kg Discharge conveyor: 400 cm long, 85 cm wide Optional accessories for X-Spalter E/Z/D: Hydraulic telescoping With continuously adjustable mechanical winch Height-adjustable Rotatable wireless cable winch, 35 m cable Optional accessories for X-Spalter D/E/Z: - 380 kg tractive force Unbraked axle, 25 km/h (Germany/Austria) Accessories for X-Spalter E/Z/D

Condition: new, SSP 450 E Binderberger saw-splitter automatic machine automatic electric motor 22+9 kW/40V/63A Fully automatic control Loading conveyor belt 4 m Short drawbar Non-braked axle Oil cooler Hydraulic 2 m feeding stand Fjdow Szanjpfx Aa Roft Stationary with wood storage Hydraulic preparation for cross conveyor mounting Splitting cross 2-4-8 way Hydraulic preparation for external cleaning unit with hydraulic flap

Condition: new, Year of construction: 2023, HXF 3302 Greentec Multi Carrier in standard configuration, additionally with: left-hand mounting, reach: 2500 mm, 45° collision protection, 110° head angle adjustment, weight: 200 kg Ffjdpfjw Sfrhjx Aa Ret

Condition: used, Year of construction: 2025, operating hours: 82 h, power: 27 kW (36.71 HP), ST6P/ (0010) 1,150-110 Först Wood Chipper Ffsdew Sa S Njpfx Aa Rst (0020) - 2-cylinder Briggs & Stratton engine (0030) Petrol engine (0040) - 2 cutting blades with (0050) quick-change bolts (0060) - Maintenance lock (0070) - Open-top chipping system (0080) - Feed roller opening 150 x 205 mm (0090) - Steel tooth rollers, control via (0100) electric IP69 sensor button (0110) - Monitoring system (0120) - No-stress system (0130) - Central lubrication system (0140) - One-piece engine hood with (0150) quick-release fastener (0160) - Spare wheel (0170) - Wheel chocks Annual warranty Ignition key, operating manual (0200) - TÜV certificate (0210) Demonstration unit

Condition: used, Year of construction: 2022, GFX-350 Trimble ISOBUS Terminal GFX 350 Terminal SN: 6203600396 7" touchscreen with enabled features: - Section Control Fjdpsw Iwtpefx Aa Rsft - Prescription Maps - ISOBUS - Parallel Driving InCab cable GPS receiver NAV500 SN: 6248456187 Speed determination is via the GPS antenna.