Handelsonderneming D Hoogeveen

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steerable with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard control box mounted on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: Csdpfey Ngzyjx Aaxjgt * Side underrun protection * Landing gear at the front and mechanical swing supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel holder under the chassis, right side ----Low-loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white) foldable and detachable on the saddle platform sides * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 mechanical folding extensions to 3 m overall width (but not on the rear slope) (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel packages front and rear ----Load securing (lashing package): * On the saddle platform: 2 x 6.3 t lashings each, and 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings on each side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing eyes each side, plus 1 lashing ring at the rear in the excavator arm tray * 2 x container locks immediately after the step in the low-bed platform ----Excavator arm tray: * Continuous excavator arm tray from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically width-adjustable) * 4-way valve block for future customer retrofitting of hydraulic ramp shift * The outer plank of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope * Rubber on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 liters up to 120 l/min) ----Loading dimensions: * Load area on saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gear, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle * Sample images ----Delivery time: * tba

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, left rear ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low-loader deck: * Saddle platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminum boards (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear board – 150 mm high, slotted in * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low bed with 60 mm wooden planks * Tread plate over the axles ----Widening: * 8 x mechanical folding extensions to 3 meters total width, not on the rear slope (widening planks available, stored on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lasi package): * On the saddle platform, 2 x 6.3 t lashing points each, as well as 3 x 5 t lashing bars each on the outside frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, pivotable and lowerable, integrated into the outside frame * On each side, 2 x 6.4 t lashing eyes and one lashing point in the excavator arm trough at the rear * 2 x container locks directly after the gooseneck in the low bed platform ----Excavator arm trough: * Excavator arm trough starting from the end of the last fixed axle, over the steering axle up to the rear cross member, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable in width) * 4-way control block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope * Rubber mat on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l up to 120 l/min) ----Load dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen about 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) Codpfxjy Ngz Hs Aaxjgt ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Example images may show equipment not included with the offered vehicle * Sample images ----Delivery time: * tba

Condition: used, maximum load weight: 38,050 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, loading space length: 13,190 mm, loading space width: 3,150 mm, loading space height: 890 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2018, Equipment: ABS, Kaessbohrer LB3E low-bed semi-trailer with hydraulic ramps First registration BPW Eco Plus axles Lifting axle Drum brakes with ABS and EBS Air suspension Tyres: 245/70 R17.5 35/40% Gross weight: 48,000 kg, unladen weight: 9,950 kg, payload: 38,050 kg Gooseneck length: 3.95 m Low-bed length: 9.24 m Width: 2.55 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps with lateral shift Csdjy Ngapopfx Aaxsgt Rear supports Lashing rings Stanchion pockets Subject to errors/mistakes and prior sale

Condition: used, maximum load weight: 28,000 kg, overall weight: 38,500 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 03/2027, loading space length: 13,480 mm, loading space width: 2,540 mm, Equipment: ABS, * 9008 - Vehicle ID for telephone inquiries * Low-bed semi-trailer, type: MTS-3 Cgedpfx Aaey I Iahsxjt * Special low-bed semi-trailer for transport of work platforms with fold-down rear section * ABS, EBS, BPW Eco Plus axles, twin tires, air suspension with raise/lower function, 1st axle liftable, 3rd axle friction-steered with additional steering * Gooseneck, front wall, lashing rings, storage boxes * 24 V electric pump via NATO socket * Electric winch * Radio remote control for winch and hydraulics * Rear loading platform hydraulically foldable up and down, ramp hydraulically extendable * Hydraulically liftable ramp at the neck * Grating floor over the entire loading area * Technical gross weight: 41,500 kg * Tires 1st axle: 235/75R17.5 ( 6 / 8 / 11 / 11 mm ) * Tires 2nd axle: 235/75R17.5 ( 9 / 9 / 9 / 9 mm ) * Tires 3rd axle: 235/75R17.5 ( 11 / 11 / 9 / 9 mm ) ----Our email address:     Our service for you:       - Procurement of short-term or export license plates       - Transport / delivery throughout the EU       - Customs clearance for vehicles exported to third countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * Whatsapp for English, German, and other languages:

Condition: excellent (used), functionality: fully functional, empty load weight: 12,560 kg, maximum load weight: 45,940 kg, overall weight: 58,500 kg, axle configuration: > 3 axles, color: red, Year of construction: 2024, Equipment: ABS, Langendorf low-bed semi-trailer / 2024 / 46 t load cap / 2 units Cgedpfoy Iyr Asx Aaxjt Year 2024 Technical data GVM 58500 kg Weight 12560 kg Load capacity 45940 kg Load meter 4 SAF axles ABS AGS Air suspension Technical and visual condition is excellent 2 identical units available

Condition: excellent (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 26,500 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 9,600 mm, suspension: air, Year of construction: 2017, Bodex NN3J low-bed semi-trailer Year 2017 Technical data GVM 35500 kg Weight 9000 kg Load capacity 26,500 kg Dimensions Upper deck length 535 cm Main deck length 960 cm Length of hydraulic ramps 265 cm Side panels height 60 cm Cgedpfey Iyrvox Aaxot 3 axles Air suspension Spare tire holder Tire size 235/75 R17.5 Technical and visual condition is excellent

Condition: excellent (used), functionality: fully functional, empty load weight: 12,560 kg, maximum load weight: 45,940 kg, overall weight: 58,500 kg, axle configuration: > 3 axles, suspension: air, color: red, Year of construction: 2024, Equipment: ABS, Langendorf low-bed semi-trailer / 2024 / 46 t load cap / 2 units Year 2024 Technical data GVM 58500 kg Weight 12560 kg Load capacity 45940 kg Load meter 4 SAF axles ABS AGS Air suspension Technical and visual condition is excellent 2 identical units available Csdpsy Iyrpsfx Aaxjgt

Condition: new, functionality: fully functional, empty load weight: 11,170 kg, maximum load weight: 38,830 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, loading space height: 875 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 1,350 mm, color: red, Year of construction: 2025, BRAND-NEW Kässbohrer LB3E low-bed semi-trailer / 2025 / 4 axles 1st registration 27.03.2025 Mileage 0 km Low-bed semi -trailer Weight 11170 kg Load capacity 38830 kg Platform length 924 cm Total length 1319 cm Platform height 87.5 cm Total width of the platform 255 cm Permitted platform width 3.15 m 4 SAF axles Lifted axle 2 rear axles steered Drum brakes Tire size 245/70 R 17.5 Folding ramp Ramp length 275 cm Special permissions based on decision No. TDT-ODS-277/25 (Transport Technical Inspection) Cgedpjy Iyriefx Aaxst Air suspension Permissible width of the vehicle 3.15 m GVM 58000 kg Permissible axle load 1-10000 kg 2 – 10000 kg 3 – 10000 kg 4 – 10000 kg We offer 4 brand-new Kässbohrer 3-axle low trailers and 2 brand-new Kässbohrer 4-axle low trailers

Condition: used, functionality: unexamined, color: green, FOR SALE: SAHN low loader – 4 axle BROSHUIS 4AOU-16-40. Manufacturer: Broshuis Year of manufacture: 2007 Csdey Iw Stopfx Aaxsgt Rear axle steering Available at short notice EXW 27793 Wildeshausen

Condition: used, empty load weight: 7,420 kg, maximum load weight: 37,580 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 07/2019, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 56 x lashing eyes, loading area length high bed approx. 3,850 mm, loading area length low bed approx. 9,600 mm, loading height 880 mm, 4 x center stanchions, 8 x stanchion pockets in the outer frame, surcharge for aluminium ramps: 900 ¤ , , Vehicle is sold on order, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Codpfey Irzpox Aaxsgt

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgodpfx Aey Irwqeaxjt

Condition: used, maximum load weight: 49,900 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 01/2020, next inspection (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single-extendable load platform, wheel recess, with rear bevel and loading ramps Dimension B: 11,300 mm Unladen weight: 15,100 kg STZ-L gooseneck - Robust steel welded construction - Formed load platform: 3,900 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) - 5th wheel plate with ball bearing slewing ring and interchangeable 2" king pin, with adjustable steering wedge - Mechanical landing legs at the front Load platform - Single-telescoping, designed as an outer-inner tube construction with a 300 mm fixed front deck section - 300 mm sliding table on the inner tube, adjustable and lockable - Extension stage locking via spring-applied cylinder and conical locking pin - 1 pair of wheel recesses after the 1st axle, depth 410 mm Chassis - 4-axle, air-suspended chassis - 1st axle liftable and steered in the forward direction - SAF axle assemblies, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic brake rod adjusters (AGS) - Standard raise/lower valve for lowering to min. 805 mm or raising to max. 1,050 mm - Loading height: 860 mm - Excavator arm recess: 3,850 mm long, 750 mm wide - Wheel recess after gooseneck: 410 mm deep - Wheel recess after the 1st axle: 410 mm deep Vehicle rear - "Bevelled" design at 500 mm - Short rear overhang: 1,240 mm measured from the center of the last axle - Hydraulic rear supports Loading ramps - 2-piece ramps, length: 2,855 mm / 1,415 mm, width: 890 mm - Hydraulically adjustable ramps Braking system - 2-line full air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic brake rod adjusters (AGS) - Parking brake via spring-applied cylinders - Anti-lock braking system (ABS) Special equipment Cgedpfxjy Iq Tdo Aaxet - Wheel recess - Excavator arm recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical data Gooseneck Load platform (LxW): 3,900 x 2,480 mm 1,000 mm Wirtgen slope Fifth wheel height when loaded: 1,250 mm Load platform Load platform (LxW): 8,800 x 2,550 mm Telescoping extension: 2,800 mm Stepwise extension to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered in forward direction 2nd-4th axle hydromechanically force-steered (dual-circuit steering) Radio remote control Electric power unit

Condition: used, maximum load weight: 56,200 kg, overall weight: 69,800 kg, axle configuration: > 3 axles, first registration: 10/2021, loading space length: 12,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,625 mm, Year of construction: 2021, Equipment: ABS, FYAMONVILLE 4 (2+2)-axle MULTIMAX low-loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, one owner 4.1m telescopic, fully hydraulic ramps and supports, wheel recesses, extendable width, ALLOY WHEELS FULLY EQUIPPED!!! Gooseneck: Gooseneck SNT design approx. 3.7m, slope approx. 1,000 mm x 10° Loading platform: Extendable loading platform, length approx. 8.8m, slope approx. 500 mm x 10° Excavator stick recess approx. 2490x750x210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward Axles and suspension: 4x BPW axles 12t, 2 fixed, 2 trailing self-steering axles Electromagnetic reverse lock Reverse gear + manual Air suspension raise & lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN or PIRELLI Load Index: 143/141J (144/144F), spare wheel NEW 16x ALLOY WHEELS, POWDER COATED WABCO braking system, EBS-E EU regulations 24-volt lighting system ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets 24N, 24S & 15-pin PAINTWORK Standard HRM metallisation of the outer frame Complete steel construction shot-blasted, ARC-GALVANIZED with ZINACOR 850 (zinc 85% - aluminum 15%) hot-finished Steel structure: Steel qualities: * S355J2+N/S355MC (yield strength 355MPa) * S690QL/S700MC (yield strength 690MPa) * Welders certified per DIN-EN 287-1 * MAG welding process according to EN ISO 4063 * Protective gas M21 according to EN ISO 14175 Accessories: Removable front wall made of steel, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic operations Codpfey Iq Arex Aaxsgt * Spare wheel holder on the front wall * Attachment holes for screw-in lashing rings * The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Fastening hole at the rear upper area of the outer beams * 1 pair of screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood covering * 1 pair of removable aluminium side boards, aluminium rear board approx. 400 mm high, anodised * 2'' kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * 4 wheel chocks with holders * Mounting for aluminium approach ramps * JOST mechanical landing legs with 2-speed gearbox and crank * Continuous loading platform, hardwood floor approx. 50 mm thick, interrupted between the axles * Securing the loading platform with conically welded locking profiles, 250 mm incl. pre-tensioning plate * Slotted holes at the front of the loading platform for suspended and repositionable bridging elements * 1 intermediate table with stepped loading platform, approx. 300 mm wide for the extension tube * Front and rear with slotted holes for suspended or repositionable bridging elements * Removable cover level with the loading platform * Extensions extendable by approx. 230 mm each side * 1 pair of permanently installed open wheel recesses up to the extension, approx. 700 x 410 mm, in the loading platform before the 1st axle * Covers for the wheel recesses longitudinally divided, with wooden support, exterior with plug-in locks * Wheel recesses with sheet metal covering and 15 x 15 mm square climbing strips every approx. 200 mm * Between the 2nd and 3rd axle in the platform a pair of permanently installed wheel recesses * Rubber floor "Super Grip" 25 mm and 5 mm steel floor as additional reinf

Condition: used, maximum load weight: 69,060 kg, overall weight: 84,000 kg, axle configuration: > 3 axles, first registration: 06/2013, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire stock of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. - Chassis made of high-quality QSTE fine-grained steel, with central frame, non-telescopic Cgodpfxey Ikbhe Aaxot - Lashing rings, lashing force approx. 100 kN per ring, foldable - 4 pairs of stake pockets in the area of the loading brackets, approx. 80 x 80 mm - Hydraulic supports (electro-hydraulic) - 6 x 11,000 kg (technical), SAF axles - Air suspension - 1st axle steered (leading axle), 2nd axle fixed - 3rd to 6th axles forced steering - Tridec steering system - Additional steering - NATO socket - 1st axle liftable - Tires 265/70R19.5 - 3.5 inch kingpin, exchangeable - Wabco ABS/EBS braking system - Steel front wall, approx. 400 mm high - 2 drop sides on the gooseneck - Single-color paint finish in RAL 3000 red

Condition: used, empty load weight: 11,130 kg, maximum load weight: 36,870 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 235/75 R 17,5 140J, color: other, gearing type: other, front tire size: 235/75 R 17,5 140J, rear tire size: 235/75 R 17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 4 x wheel recesses with covers, lashing rings, electro-hydraulic pump for ramps and supports, -- Printing errors, inaccuracies, and changes reserved, sample images --, More data at: !, More details: ! Csdjy Igvhjpfx Aaxsgt

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, high bed length approx. 3,500 mm, low bed length approx. 8,800 mm, loading height approx. 900 mm, for 2-axle and 3-axle tractor units, front wall approx. 800 mm high, 16 stake pockets in the outer frame, 32 lashing eyes, ramp approx. 3,100 mm long, ramps for driving over the gooseneck, -- misprints, errors, and changes excepted, sample images --, More data under: !, More Details: ! Cgodpfoy Igwrjx Aaxst

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-sprung with lift axle, axle load gauge, high bed length approx. 3,500 mm, low bed length approx. 8,800 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle tractor units, front wall approx. 800 mm high, 16 stake pockets in the outer frame, 32 lashing rings, ramp approx. 4,200 mm long (2-part), hydraulic ramp displacement, ramps driveable across the gooseneck. -- Subject to errors, omissions and changes, sample images -- More data at: !, More Details: ! Csdpfxjy Igwxe Aaxegt

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,140 mm, length low bed approx. 8,600 mm, loading height approx. 900 mm, for 2-axle and 3-axle tractor unit, front wall approx. 1,600 mm high, 18 x stake pockets in outer frame, 3 x cross stake rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for aluminum ramps, Price: 1,900 ¤, , Spare wheel, Price: 300 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Csdpfsy Igw Eex Aaxsgt

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cjdpfx Aaoy Igxcsxegt

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Csdpfx Ajy Igxijaxsgt

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, KRONE Cool Liner Type: SD 27 eL4-S EC type approval no.: e1*2018/858*00180 Unladen weight: 8,230 kg Body length (internal): 13,310 mm Body width (internal): approx. 2,460 mm Internal height: 2,630 mm SAF axles, air suspension and disc brakes Intradisc, ET120 1st axle is a lift axle. Fully automatic electronic axle lift system, load-dependent. 2x spare wheel holders left and right 1x pallet storage box, closed, for 36 Euro pallets 1x tool box, plastic, max. surface load 50 kg, external dimensions approx. 650x490x450 mm Braking system according to ECE Regulation 13 (including vehicle stabilization function) 4 vertical distance profiles (100 mm) fitted to the inside of the front wall for optimum airflow Crash plate bolted to inside of the front wall 4 KRONE LED ceiling lights Door contact switch for interior lighting Refrigeration unit Carrier Vector 1550 S, diesel/electric Temperature recorder make: Carrier, type: DataCold 600 T, incl. printer, 2 sensors KRONE Telematics KSC ProPlus Cool 1 - Location monitoring - Error messages from brake system - Operating data - Door monitoring - Temperature monitoring - Refrigeration unit monitoring - Coupling status - Various WiFi applications Ex works price Lübtheen Errors and prior sale excepted. Codpfx Aey Ifi Tjaxjgt

Condition: used, maximum load weight: 29,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2019, total width: 2,550 mm, total height: 3,020 mm, Equipment: ABS, Kässbohrer low-loader semi-trailer with 3 axles and 2 ramps Equipment: + 1st axle liftable + 2nd and 3rd steering axles + 2x hydraulic 300 mm loading ramps + 2x supports + Extendable by 4 meters + Removable wheel recesses for machines up to 3.40 m + BPW axles + Air suspension + ABS Cgsdpfx Aey H Tfmeaxst We are also happy to assist you with financing/leasing options through our partners. All information provided without guarantee. Subject to errors and prior sale.

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Cedpfx Ajy H A Rxeaxogt

Condition: like new (used), functionality: fully functional, empty load weight: 14,900 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2025, color: red, Year of construction: 2025, The trailer is being sold in combination with the Volvo FH16-750. The vehicle can be extended by up to 4.05 m. It is equipped with a long material support as well as two hydraulic loading ramps. Cgodpoy H Agajfx Aaxjt

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2024, Visit our website, where you will find our complete vehicle inventory with many more photos and information available in multiple languages. Cgedpfx Ajy Hzt Soaxst SEL 8515 Möslein STO 3 Lift axle / Steering axle Austrian registration First registration: 21.05.2024 Gross vehicle weight (kg): 42,000 Permitted weight (kg): 39,000 Unladen weight (kg): 8,220 VIN: W09MTS0480SM396 TIRES AND AXLES: Tires: 245/70 R 17.5 Axle configuration: 3 BPW axles 3rd axle: Steering axle 1st axle: Lift axle Air suspension Disc brakes VEHICLE DOCUMENTATION: Documentation from Austria M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Whilst every effort has been made to ensure the accuracy of the information provided, we cannot accept responsibility for any errors or omissions. We kindly ask our customers to refer to the available photos. The measurements indicated are approximate values. Our vehicles are sold as seen, in their current condition. We invite customers to visit our company to personally inspect the vehicle. We also offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer requires new batteries, we are available to provide pricing information.