Partenheimer GmbH & Co. KG

Condition: new, overall weight: 3,500 kg, empty load weight: 810 kg, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 370 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber spring tandem axle, each 1500 kg − Body width 1500 mm − Body length 2970 mm − Rigid ball coupling - ball center approx. 430 mm − 4x 185 R14C tires − 2x NATO fenders − Wheel shock absorbers for 100 km/h − Automatic support wheel − 2x galvanized wheel chocks − Exterior completely painted with 2K paint as desired − Industrial wooden floor 18 mm solid birch, screen-printed − Stainless steel net hooks in the side, head, and rear walls − Swing tailgate − 4 side lashings − Tipping device with hand pump, cylinder, and tilt bearing − Integrated 12V 13-pin lighting with interior light − TÜV certificate for New vehicle − Electric pump with battery installed under the loading area, in a splash-proof box with an emergency hand pump − 2x aluminum loading ramps − Railing cover made of aluminum teardrop plate Fslswk D Dushcdw Eeph Base frame made of 3 mm sheet steel with fully welded cross tubes, and the corner stanchions made of 60x60 mm are fully welded. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized and fully walkable.

Condition: new, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle, 750 kg − Body width 1.18 m − Body length 2.10 m − Rigid ball coupling − 2x 145/80R13 tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 8 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 15 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall Fslhcdwewk A Ncj Eeph − 2 drop legs in the rear − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Beam / H-frame Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted. Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.

Condition: new, overall weight: 1,500 kg, empty load weight: 500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 370 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber suspension axle with a load capacity of 1500 kg Fslewkq Dnohcdw Eeph − Body width: 1300 mm − Body length: 2500 mm − Rigid ball coupling - ball center approx. 430 mm − 2x 185 R14C tires − 2x NATO fenders − Railings on the head and side walls − Wheel shock absorbers for 100 km/h − Automatic support wheel − 2x galvanized wheel chocks − Exterior completely painted with a 2-component paint as desired − Industrial wooden floor made of 18 mm solid birch, screen-printed − Stainless steel net hooks on the side, head, and rear walls − Swing tailgate − 4 side lashings − Tipping device with hand pump, cylinder, and tilt bearing − Integrated 12V 13-pin lighting with interior light − TÜV certificate for new vehicle Base frame made of 3 mm sheet steel with fully welded cross tubes, and fully welded corner posts made of 60x60 mm steel. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized and fully walkable.

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 370 mm, Year of construction: 2025, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber suspension axle 1500 kg Felhcdwewkq Aqj Eoph − Body width 1.30 m − Body length 2.50 m − Rigid ball coupling − 2x 185 R14C tires − 2x NATO wings including aluminum steps − Side light panel - for more ground clearance − 2x plastic wheel chocks − 5 eyelets inside for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Painted in the customer's desired color according to the RAL catalog Base frame made of 3 mm galvanized sheet steel and cross-bolted with hat profiles, and the corner stanchions made of 50x50 are fully welded. Industrial plywood floor 18mm solid brike.

Condition: new, overall weight: 2,600 kg, empty load weight: 780 kg, loading space length: 2,700 mm, loading space width: 1,350 mm, loading space height: 370 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber spring tandem axle, each 1300 kg − Body width 1350 mm − Body length 2700 mm − Rigid ball coupling - ball center approx. 430 mm − 4x 185 R14C tires − 2x NATO fenders − Wheel shock absorbers for 100 km/h Fpelhswkqumecdw Eeh − Automatic support wheel − 2x galvanized wheel chocks − Exterior completely painted with 2K paint as desired − Industrial wooden floor 18 mm solid birch, screen-printed − Stainless steel net hooks in the side, head, and rear walls − Swing tailgate − 4 side lashings − Tipping device with hand pump, cylinder, and tilt bearing − Integrated 12V 13-pin lighting with interior light − TÜV certificate for New vehicle Base frame made of 3 mm sheet steel with fully welded cross tubes, and fully welded corner stanchions made of 60x60 mm steel. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized, and fully walkable.

Condition: new, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 370 mm, 100% Made in Germany Fpslhewkpxqjcdw Eoh Pre-order vehicle!!! Basic equipment: − Rubber suspension axle 1300 kg − Body width 1.25 m − Body length 2.50 m − Rigid ball coupling − 2x 185 R14C tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 5 internal eyelets for fastening − Side and head walls approximately 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed − Integrated 12V 13-pin lighting with interior light − TÜV certificate for new vehicles − Painted in the customer's desired color according to the RAL catalog Base frame as a tub made of 2.50 mm galvanized sheet steel and cross-bolted with hat profiles, and the corner stanchions made of 40x40 mm are fully welded. Industrial plywood floor made of 18 mm solid birch.

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 1,650 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber suspension axle 1500 kg − Body width 1.30 m − Body length 2.50 m − Rigid ball coupling − 2x 185 R14C tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 5 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Tarpaulin and bows − Painted in the customer's desired color according to the RAL catalog Fpelhcswkppijdw Eeh Base frame made of 3 mm galvanized sheet steel and cross-bolted with hat profiles, and the corner stanchions made of 50x50 are fully welded. 18mm solid briquette industrial plywood floor. Base frame in the form of a tray made of 3mm galvanized sheet steel and cross-bolted with hat profiles, and the corner posts made of 50x50 mm are fully welded. 18mm solid briquette industrial plywood floor.

Condition: new, 100% Made in Germany Order vehicle!!! Basic equipment: − Rubber spring tandem axle, each with a load capacity of 1500 kg − Body width 1800 mm − Body length 2700 mm − Body height 1100 mm − 5 x 10-inch tires − Wheel shock absorbers for 100 km/h − Automatic support wheel − 2 x wheel chocks − Exterior completely painted with 2-component paint − Industrial wooden floor made of 18 mm solid birch, screen-printed − 5 floor tie-down points on each long side of the frame − Integrated 12V 13-pin lighting with interior light − Spare tire holder − TÜV certificate for new vehicles Base frame made of steel profiles, welded and then hot-dip galvanized. The box body consists of a head and rear wall and is permanently attached to the base frame. The front and rear walls are each made of a screen-printed panel. The roof section is fixed and made of aluminum. Side flaps are 400 mm long and can be folded down and are made of aluminum. A hinged lid on each side can be locked and lifted. Fpelhcdewkh Spjw Eeh

Condition: new, overall weight: 750 kg, loading space length: 2,100 mm, loading space width: 1,180 mm, loading space height: 380 mm, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle, 750 kg − Body width 1.18 m − Body length 2.10 m − Rigid ball coupling − 2x 145/80R13 tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 8 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 15 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-down straps per side wall − 2 drop legs in the rear − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles Fslhcdewkhu Row Esph Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted. Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.

Condition: new, overall weight: 750 kg, loading space length: 2,100 mm, loading space width: 1,180 mm, loading space height: 800 mm, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle, 750 kg − Body width 1.18 m − Body length 2.10 m − Rigid ball coupling − 2x 145/80R13 tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 8 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 15 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-down straps per side wall − 2 drop legs in the rear − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles Fjlhswkgniocdw Eoph − Flatbed frame construction Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted. Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.

Condition: new, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle, 750 kg − Body width 1.18 m − Body length 2.10 m − Rigid ball coupling − 2x 145/80R13 tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 8 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 15 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-down straps per side wall − 2 drop legs in the rear − Integrated 12V 13-pin lighting with interior light Fjlhowkgg Socdw Esph − 100 km/h − TÜV certificate for new vehicles − Flatbed frame construction Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted. Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.

Condition: new, overall weight: 3,500 kg, loading space length: 2,800 mm, loading space width: 1,650 mm, loading space height: 1,550 mm, Year of construction: 2024, 100% Made in Germany New vehicle - available immediately!!! Basic equipment: − Rubber springs on the tandem axle, each with a load capacity of 1800 kg − Body width: 1650 mm − Body length: 2800 mm − Body height: 1550 mm Fjlhcjwkgfbedw Eeph − 5 x 12-inch tires − Wheel shock absorbers for 100 km/h − Automatic support wheel − 2 x wheel chocks − Exterior completely painted with a 2-component paint finish − Industrial wooden floor made of 18 mm solid birch, screen-printed − 5 floor tie-down points on each long side of the frame − Integrated 12V 13-pin lighting with interior light − Spare tire holder − TÜV certificate for new vehicles Base frame made of welded steel profiles and then hot-dip galvanized. The box body consists of a head and rear wall and is permanently attached to the base frame. The front and rear walls are each made of screen-printed panels. The roof section is fixed and made of aluminum. The side flaps are 400mm long and fold down and are removable and made of aluminum. A hinged lid with a lifting aid and for locking is located on each side.

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 370 mm, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle 1500 kg − Box width 1.30 m − Box length 2.50 m − Rigid ball coupling − 2x 185 R14C tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 5 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed Fpjlhcewkgaledw Eeh − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Paintwork --> see pictures Base frame made of 3 mm galvanized sheet steel and cross-bolted with hat profiles, and the corner stanchions made of 50x50 mm are fully welded. Industrial plywood floor made of 18 mm solid birch.

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 370 mm, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle 1500 kg − Box width 1.30 m − Box length 2.50 m − Rigid ball coupling − 2x 185 R14C tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 5 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Paintwork --> see pictures Fjlhcdwowkf Uzs Eeph Base frame made of 3 mm galvanized sheet steel and cross-bolted with hat profiles, and the corner stanchions made of 50x50 mm are fully welded. Industrial plywood floor made of 18 mm solid birch.

Condition: new, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, Year of construction: 2025, 100% Made in Germany New vehicle - available immediately!!! Standard equipment: − Rubber suspension axle 1500 kg − Box width 1.30 m − Box length 2.50 m Fpjlhcdwjwkf Ube Esh − Rigid ball coupling − 2x 185 R14C tires − 2x plastic fenders − Jockey wheel − 2x plastic wheel chocks − 5 internal eyelets for fastening − Side and head walls approx. 380 mm high − Industrial wooden floor made of 18 mm solid birch, screen-printed − 16 net hooks in the side, head, and rear walls − 2 tie-downs per side wall − Integrated 12V 13-pin lighting with interior light − 100 km/h − TÜV certificate for new vehicles − Paintwork --> see pictures Base frame made of 3 mm galvanized sheet steel and cross-screwed with hat profiles, and the corner stanchions made of 50x50 mm are fully welded. Industrial plywood floor made of 18 mm solid birch.

Condition: new, overall weight: 3,500 kg, empty load weight: 930 kg, loading space length: 2,970 mm, loading space width: 1,500 mm, loading space height: 800 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber spring tandem axle, each with a load capacity of 1800 kg − Body width: 1500 mm − Body length: 2970 mm − Rigid ball coupling - ball center approx. 430 mm − 4x 185 R14C tires − 2x NATO fenders − Wheel shock absorbers for 100 km/h − Automatic support wheel − 2x galvanized wheel chocks − Exterior completely painted with a 2-component paint as desired − Industrial wooden floor made of 18 mm solid birch, screen-printed − Stainless steel net hooks in the side, head, and rear walls − Swing tailgate − 4 side lashings − Tipping device with hand pump, cylinder, and tilt bearing − Integrated 12V 13-pin lighting with interior light − TÜV certificate for New vehicle Felhcowkf Rpjdw Esph − Four-part steel profile frame filled with corrugated mesh − Electric pump with battery installed under the loading area, in a splash-proof box with an emergency hand pump Base frame made of 3 mm sheet steel with fully welded cross tubes, and fully welded corner stanchions made of 60x60 mm steel. All parts are hot-dip galvanized. The floor is made of 18 mm solid briquette industrial plywood. The fenders are made of 2 mm sheet steel, hot-dip galvanized and fully walkable. Dry weight: 930 kg with corrugated mesh frame and electric pump

Condition: new, overall weight: 3,500 kg, empty load weight: 800 kg, maximum load weight: 2,700 kg, loading space length: 3,500 mm, loading space width: 1,700 mm, loading space height: 370 mm, 100% Made in Germany Pre-order vehicle!!! Basic equipment: − Rubber spring tandem axle, each with a load capacity of 1800 kg − Body width: 1700 mm − Body length: 3500 mm − Rigid ball coupling - ball center approx. 440 mm − 4x 185 R14C tires − 2x NATO fenders − Wheel shock absorbers for 100 km/h − Automatic jockey wheel − 2x galvanized wheel chocks − 60x30 slotted holes in the side and head walls for lashing − Exterior body completely painted with a 2K paint finish as desired − Industrial wooden floor made of 18 mm solid birch, screen-printed − 6 floor lashing points, each with a load capacity of 2000 kg − Integrated 12V 13-pin lighting with interior light − TÜV certificate for new vehicles Fslowkf Nrehcdw Eoph − Excavator bucket support − Painted in the customer's desired color according to the RAL catalog Options for an additional charge: − Ramp across the entire width − Spare wheel and complete wheel holder − Height-adjustable coupling Base frame made of 3 mm sheet steel with fully welded cross tubes, fully welded corner stanchions made of 60x60 mm steel, and the rear section is a welded construction. 2x loading ramps with grating filling. All parts are hot-dip galvanized. Ramps can be moved up to the middle of the trailer, and a lifting aid is included for easy lifting. Industrial plywood floor made of 18 mm solid briquette. Fenders made of 2 mm sheet steel, hot-dip galvanized, painted in the desired color, and riveted with aluminum checker plate - fully walkable.