Harener Baumaschinenverleih

Condition: new, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrical / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (activated when reverse gear is engaged) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards Nwodjx Nli Njpfx Ahzjr * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation for lashing equipment; lashing capacity per lashing point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg fold-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 sockets per side in the outer frame for stakes 100 x 50 mm – stakes not included in the delivery * 30 mm anti-slip phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured with container locks, with lateral forklift pockets, center/center 800 mm (pocket width: 185 mm) * Max. drum diameter: 2,600 mm; max. drum width: 1,650 mm * Clear width between support arms: approx. 1,775 mm, with cross member * Max. drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with clamping closure for securing drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 set collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on support arms for customer-provided securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t GVWR possible * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex works Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) Nwsdpfx Ahex Ipb Hjzjr * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles Nwodsx Ipa Nepfx Ahzjr * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * 4 stake pockets per side (no stakes present), can also be used as lashing points * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t. * 6 pairs mechanical folding outriggers for 3 m overall width (not included in the rear slope) * Widening planks stored in the center of the loading area * Dipper stick tray over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the dipper stick tray) * Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 12/2026 * Sample image

Condition: used, overall weight: 3,500 kg, axle configuration: 1 axle, first registration: 09/1996, Year of construction: 1996, Equipment: crane, * Technical Specifications * Name: DENKA LIFT MK 25 * Clemens AB 25 meter Working height: 25.00 m / 200 kg Basket load capacity: 200 kg / 2 persons Slew range: 360° continuous Outreach: 11.40 m / 80 kg Outreach: 9.00 m / 200 kg Own weight: 2,450 kg Platform size: 0.70 x 1.40 m Passage width: 1.69 m Passage height: 2.11 m Overall length: 9.07 m Minimum length: 8.30 m * Outrigger footprint: 3.90 x 3.90 m * Features - 24V battery drive with built-in automatic charger - Hydraulic quick outrigger system - Second control panel on chassis - 230 V socket and tool tray in platform - Jib arm with rotating platform - Manual emergency operation - Safety system for outrigger legs and overload - Infinitely variable proportional control * Operating hours: Mon to Fri 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00 * Email: * Tel/ WhatsApp/ Viber: Alexandar Ilic Njdsxzw Hzspfx Ahzjwr * Tel/ WhatsApp/ Viber (English): Mladen Ilic

Condition: used, maximum load weight: 1,205 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 07/2005, next inspection (TÜV): 06/2027, loading space length: 3,650 mm, loading space width: 1,900 mm, Platform tipping trailer from municipal ownership Load area length: 3650 mm Load area width: 1900 mm 1st owner Next inspection: 06/2027 ----* additionally, foldable loading ramp * Permissible gross weight: 1500 kg * Unladen weight: 295 kg Nwsdpoxyvm Dofx Ahzer * Floor made of laminated panels * Base frame and superstructure galvanized Condition: normal and functional

Condition: new, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 3,750 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Exhibition Trailer Event Promotion HBA375 Please use 0566 for inquiries.* Permissible total weight: 1,500 kg * Internal dimensions: 375x220x230 cm * Chassis: single-axle high loader, steel/galvanized with 4 extendable support legs Nsdpfx Ahexw Dt Tjzswr * Tires: 10 inch * Reverse-automated brake and jockey wheel * 13-pin plug connector * Body: white, UV-resistant polyester sandwich panels, white painted profile strips * Walls and ceiling approx. 25 mm thick * Full-length fold-down flap on the right in the direction of travel * Folding aluminum steps with insertable handrails/railings on both sides; flag holders included Additional €39 gross for vehicle documents/COC. We will send these by registered mail after receiving a (down) payment or hand them over to you in person. Please arrange a viewing in advance, as this vehicle may be sold despite our large stock on site. You can call us to check if your desired trailer is available immediately—we are also happy to order new trailers with different details (dimensions, weight, equipment, etc.) to your specifications. Due to the large number of trailers in stock, errors may occur from time to time—please bear with us. All details and prices subject to error.

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal—no truck-side installation required * Landing gear (manual crank jack) at the front * External folding supports at the rear * 15-pin electrical connector * LED lighting system, 12/24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems * Plastic toolbox, approx. 858 x 500 x 500 mm, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter fenders * 50 mm softwood flooring * Bracket in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Rear stanchions bolted * Side panels with spring-assisted lifting mechanism * Perforated external frame, approx. 45 degrees bent, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; one 6.3 t lashing ring in each front and rear corner; front and rear cross members with various holes for 1.2 t lashing options Nwjdpfx Aoxvgrpohzer * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (retractable to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Side panels painted in RAL 2011 deep orange * Custom RAL color painting of the side panels available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: good (used), functionality: fully functional, machine/vehicle number: YGCD160XTF0017195, maximum load weight: 215 kg, first registration: 07/2015, next inspection (TÜV): 11/2027, total length: 6,155 mm, total width: 1,800 mm, total height: 2,300 mm, tire size: 195R14C 106N, color: red, Year of construction: 2015, operating hours: 2,588 h, Feel free to contact us for a detailed quote or to schedule a viewing appointment! Your HEMATEC Arbeitsbühnen GmbH // Official Germany representative for aerial platform manufacturers KLUBB, ISOLI, and DINO, with branches in Dresden, Vehlefanz (near Berlin), Göttingen, and Lauchheim. If you are interested in aerial work platforms, you are also welcome to contact us. Nwedexu D Rajpfx Ahzer

Condition: used, maximum load weight: 13,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2011, loading space length: 7,100 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 2,200 mm, Year of construction: 2011, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- * M&V NO2A21 * Turntable (Drehschemel) * SAF axles * Drum brakes * Suspension: air * Spare wheel * Axle load front/rear: 9,000 kg / 9,000 kg * Tyres front/rear: 245/70 R17.5 * Cargo space dimensions (LxW): 7,200 mm x 2,480 mm * Side panel height: 530 mm * Removable central stanchions * Lashing rails left and right Nwodpfx Ajxrxvxshzjr ----Technical data: * GVW: 18,000 kg * Unladen weight: 4,120 kg * Payload: 13,880 kg ----#German vehicle *1st owner# Financing/leasing/installment purchase available on request. ----Advertising/company logos on the vehicles may have been digitally removed from the images. ----Contact person via phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To make your appointment as pleasant as possible, please schedule a viewing in advance. ----Subject to errors, changes, and prior sale. All information without guarantee, especially regarding equipment and accessories.

Condition: used, maximum load weight: 14,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 3,100 mm, total width: 2,500 mm, total height: 2,155 mm, Year of construction: 2023, Equipment: ABS, Almost new platform trailer, year 2023, from 1st owner, loading edge height 0.90 cm, possibly with MAN platform trailer/flatbed from year 2019, only 498,000 km driven, 18.460 fully equipped. Price: 54,980.00 net. Sale only to dealers and commercial customers. No liability for typographical and listing errors. Njdpfx Ahjxq Uhhszswr All information provided without guarantee. Subject to prior sale.

Condition: new, machine/vehicle number: AHW MT3080, overall weight: 3,000 kg, loading space length: 3,080 mm, loading space width: 1,520 mm, ANHÄNGERWIRTZ, your online pick-up market for new trailers, offers top brand models ready for immediate pick-up! Over 850 new trailers in stock Over 100 used trailers permanently available More than 150 vehicle transporters – popular models with extensive accessory options in stock Non-binding example: Exhibition trailer ready for collection Brenderup Machine Transporter MT 3080 GD 308x152cm 3000kg, low loader with tandem axle, V-drawbar, loading ramp as rear gate with support leg 13-pin plastic connector, 14-inch tires Support wheel, 6 inside lashing rings / 400 daN Nwodpfxjxq Sbxo Ahzer Digger bucket resting area Non-slip fender covering and running board Hot-dip galvanized, high-quality, sturdy phenolic plywood floor Robust metal wheel chocks, position lighting Recessed lights Spare wheel, including holder below the bucket tray The largest range of transporters available immediately Sales and order acceptance by phone during the day, or 24/7 via our trailer shop All images and descriptions in this advertisement are protected by copyright – logos and brands by trademark law 10/25 39033

Condition: used, maximum load weight: 7,500 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 06/2020, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Overall length: 9,150 mm Loading length: approx. 7,300 mm Width: total width 2,550 mm / loading width approx. 2,480 mm Loading height: approx. 900 mm Further information: - Cargo space internal height: 2,700 mm - Fine-grain steel welded construction Nsdpfoxqvyfox Ahzowr - Outer frame slightly sloped with "Load-Lock profile" for attaching lashing straps - 2-speed landing gear at the front - Foldable rear supports - Steel underrun protection - Quarter-shell mudguards - Rear impact protection - Drawbar height adjustable via spindle - GFA axles with tapered roller bearings and S-cam brakes - Air suspension - 2-line compressed air brake system / raise-lower valve - Anti-slip phenolic resin flooring, approx. 30 mm thick, for high point loads - 2,580 mm high, steel corner posts in volume specification, release mechanism for side tarpaulin at the front wall, - 1 pair of sliding posts adjustable along the full length, with 4-way insert pockets and long pocket at the bottom - Rear corner posts in steel up to the lower edge of the roof, tarpaulin hangers with round tube and tarpaulin tensioning ratchet - Rear portal doors, double-winged with 2 internal locking bars each - Tarpaulin, fitted with welded horizontal and vertical belts; tensioning locks made of stainless steel - Fixed roof with tarpaulin and bows Tarpaulin may have advertising applied and/or be lettered. New tarpaulin available on request.

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) Nsdpfx Ajxptn Djhzewr * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: used, maximum load weight: 643 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 05/2025, next inspection (TÜV): 05/2027, total width: 1,960 mm, total height: 600 mm, Welcome to DreamCars Essen. In this listing, we are offering you a NEW!!!BARELY USED ----* First registration 05/2025 * TÜV/HU/AU valid until 05/2027 * 1 previous owner ----Vehicle Dimensions and Weight: Gross vehicle weight: 850 KG * Unladen weight: 207 KG * Payload: 643 KG * Overall length: 3250 MM * Overall width: 1960 MM * Overall height: 600 MM Nwodpoxpqg Refx Ahzjr ----Starting today, we also offer you the option to arrange financing or leasing with us. For more information on terms and conditions, please contact us via email or phone. ----Our offers and services for you: * Warranty up to 24 months available at extra cost * New TÜV inspection on request * Nationwide delivery possible at extra charge * Video/photo documentation can be sent via email or WhatsApp * Vehicle registration service available (export plates, temporary plates, etc.) * Trade-in or purchase of your used vehicle also possible * Want to retrofit or add special features to the vehicle? No problem * Free collection from train stations within a 20–30 KM radius ----Opening hours: Mon–Fri: 10:00 AM – 6:00 PM, Sat: 11:00 AM – 5:00 PM ----Visit us on our website: ----Subject to change, errors, and prior sale.

Condition: new, maximum load weight: 30,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no installation required on the truck side * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors to display total axle load per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin electrical connector * LED rear lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Closed single plastic mudguards at the front * Straight steel mudflap skirts at the rear, each with spray suppression (anti-spray) * Side underrun protection * Front superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made from high-strength fine-grain steel Nwedpfxoxmpydo Ahzsr * Deck over bogie platform from 50 mm and in low-bed platform from 60 mm softwood * Outer planks of the ramps made from 50 mm hardwood * Load securing package comprising: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform; on each side, front and rear, 1 pair of 13.4 t lashing rings on the outer frame; 1 pair of 10 t lashing rings per side, hinged and lowerable, loadable in all directions and recessed into the outer frame; bolted 5 t lashing rings to the outer frame of the wheel recesses (2 each at the front wheel recess, 1 each at the rear); 2 pairs of 6.4 t lashing rings at the sides in the excavator boom holder * 11 pairs of folding outriggers for 3 m total width (except for rear bevel) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for steel widening planks mounted crossways to the loading surface in front of the first rear axle * Excavator boom holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulic extendable ramp tip approx. 4,650 x 720 mm * Hydraulic side ramp shift * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded loading height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop supports and drive-on ramps hot-dip galvanized * Axles, air tanks and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Available from week 14/2026 * Sample images

Condition: new, maximum load weight: 9,840 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available upon request. Chassis: * Steel welded construction with welded longitudinal beams and perforated Z-cross members * Tight cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two insertion pockets for one loading ramp each located below the loading floor, with closing plate in the rear end frame Front Support: * Support winch with single-side operation Drawbar Equipment: * Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN * Height adjustment +/- 150 mm Rear Support: * Two adjustable drop legs Running Gear: * 2 x 7 t air suspension axle assembly, make: SAF * Drum brakes approx. 300 x 150 mm * Wheel connection 10-hole, center-bolted for single tires * Total air suspension lift approx. 180 mm, of which lift approx. 150 mm and lower approx. 30 mm * Control via hand lever with latching function Tyres: * 4 x 285/70 R 19.5 – manufacturer at our discretion * On 8.25 x 19.5 steel rims, manufacturer at our discretion Splash Protection: * PVC mudguards in front of and behind the axles * In accordance with EU regulations with rear mudflaps Load Securing: * In the outer frame, a lashing rail for tension belts every approx. 200 mm, lashing force approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, lashing force approx. 8,000 daN * Stake pockets for insert stakes 80/50 * 3 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets transverse to the loading area, evenly distributed Brake System: * Air brake system according to EU regulations with EBS and a red/yellow coupling head each on the connection plate at the drawbar * As a connection to the towing vehicle, a double-coil with 1 coupling head red/yellow and 1 duomatic coupling * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor inlaid in the outer frame * Wheel arch area with sheet metal covering * Floor capacity: forklift driveable up to approx. 5 tons Container Locks: * Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452-1 * Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452 Lighting: * Lighting system according to EU regulations, 24 Volt * Multi-chamber rear lights, license plate lights, side marker lights, and contour marker lights at the rear * Connection plate at the drawbar including connecting cable with 15-pin and 2 x 7-pin plugs Nedpfxjxc Axxs Ahzewr Accessories included: * 1 plug-in rotating beacon at the rear with registration for continuous light * Additionally, with switch: 2 LED reversing lights at the rear on lamp bracket, operated via reverse gear * Side and rear welded forklift bump stops * 1 stainless steel toolbox each left and right behind the axles * 6 x 25 cm side boards (3 per side) and front/rear wall made of anodized aluminum hollow sections, approx. 600 mm high * Side boards foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm) * Sideboard/stake magazine at the front on the front wall * 1 additional mounting plate including parking sockets for air/electricity/EBS Painting: * Chassis hot-dip galvanized * Side boards RAL 9010 Pure White * Hubs KTL-Black * Rear underrun guard RAL 9010 White * Rims RAL 9006 Silver * Vario

Condition: new, overall weight: 3,500 kg, loading space length: 6,200 mm, loading space width: 2,100 mm, tire size: 13, Year of construction: 2025, ANHÄNGERWIRTZ, the pick-up marketplace for your new trailer, offers top brand-name models! Over 850 new trailers in stock Over 130 used trailers constantly available. Nwodpfx Ahjxcytgszjr Non-binding example: Variant Machinery Transporter Variant Multi-transporter 3563 UX 620x210x30cm, 3800kg, braked tandem flatbed with low chassis, 13" wheels, tilting platform with manual hydraulic pump, 30cm foldable aluminium side walls, continuous 90cm high loading ramp with lifting aid, tie-down rings to DIN standard in chassis edge, automatic jockey wheel, modern LED lighting..... Also available in various lengths and configurations. Our Trailershop offers you the unique Roadster at a fair price with short-term availability. New vehicle, invoice with VAT shown, warranty from a specialist dealer with 35 years of experience. Copyright on images, text, and logos 11.2025 VDK-3563UX30BLACK

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera ? drum brakes Nwjdpfx Ahexb Ig Sozjr ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 15,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2007, ? Ballast platform ? 50 mm towing eye ? 5 x lashing eyes ? Drum brake ? Leaf spring suspension ? Support legs ? BPW axles Nwedpew Sqi Esfx Ahzsr All information is provided without guarantee / subject to prior sale.

Condition: used, maximum load weight: 15,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1994, Platform for ballast weights 50 mm towing eye 4 lashing eyes Nsdpew Sqilefx Ahzswr Drum brake Leaf spring suspension Support legs SAF axles All information is subject to change without notice. Subject to prior sale.

Condition: used, maximum load weight: 14,170 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 6,530 mm, loading space width: 2,540 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 18,000 kg Unladen weight: 3,830 kg Payload: 14,170 kg Overall length: 8,550 mm Loading length: 6,530 mm Width: total width 2,550 mm / loading width 2,540 mm Loading height: approx. 1,000 mm Further information - Hardwood floor with Omega profiles - Side walls present - Twin tires - BPW axles - Lashing rings - LED reversing lights Nwsdpfx Ahew N A Eyozjr

Condition: used, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 08/2026, suspension: other, color: silver, gearing type: other, driver cabin: other, emission class: none, Almost-new, used trailers from our extensive rental fleet! 9934386 Used turntable trailer from Unsinn Fahrzeugtechnik with 3 axles, Manufacturer: Unsinn, Model: UD-3 8424-35-13, Platform dimensions: 8460 x 2440 x 350 mm (LxWxH), Permissible gross weight: 3500 kg, Unladen weight: 1410 kg, Payload: 2090 kg (payload may vary depending on configuration and equipment), Low loading height thanks to 195/50 R13 C tires, 3-axle chassis provides exceptional running smoothness, Unique, torsion-resistant longitudinal beam chassis for safe driving performance, Hollow section construction, fully welded and hot-dip galvanized, 16 robust lashing recesses integrated into the side frame (8 per side), 10 additional lashing eyes beneath the loading area, All-around drop-down aluminium sideboards, Sideboards and corner stanchions can be removed without tools, Internal, long-stroke metal locks, Anti-slip, multi-bonded screen-printed plywood floor, 18 mm thick, Adjustable stabilizer spring for the drawbar, 13-pin plug, marker lights, First registration: 21.07.2025, Includes vehicle documentation. Optional extras and accessories for this trailer include: Mounted spare wheel, load securing net including net hooks installed on sideboard, retractable loading ramps. We are happy to show you how you can conveniently finance your new trailer in affordable monthly installments and provide you with a customized financing offer. We have more than 2,000 trailers in stock at all times. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard delivery. Due to ongoing product development, images and technical data may vary slightly. Subject to errors and changes! Njdpfxew H Dd Ts Ahzjwr

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2024, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear Nwjdpjwyhzpjfx Ahzjr * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: used, maximum load weight: 15,950 kg, overall weight: 20,500 kg, axle configuration: 2 axles, first registration: 10/2018, next inspection (TÜV): 05/2026, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. - SAF axles - Technical axle load: 10,000 kg each - Air suspension with lift and lower valve - Brake system with EBS - Tyres: 265/55 R19.5 - Ramp holder - Mechanically adjustable drawbar for length, 6 x approx. 100 mm - 40 mm towing eye, interchangeable for 50 mm - 3 pairs of stanchion pockets in the outer frame - 4 rows of stanchion pockets crosswise to the loading area - Widenable container locks for 1x20' - Rear extension - Side boards - 4 x stainless steel toolboxes - Single-color paint finish in RAL 3002 carmine red Njdpfx Ahewtv Hmszswr

Condition: used, maximum load weight: 4,930 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 03/2022, loading space length: 4,100 mm, loading space width: 1,990 mm, total width: 2,545 mm, total height: 2,850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 ---Please refer to the pictures for equipment and condition. ---The vehicle is in unprepared (original) condition! Nationwide delivery available at extra cost. Errors and prior sale reserved. We are happy to accept your vehicle as a trade-in. Financing / leasing also possible without down payment! Nwsdpfxjwtvvnj Ahzsr Do you still have questions? We are happy to advise you!