Waldeck Krane GmbH & Co.KG

Condition: used, mileage: 39,000 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2010, first registration: 09/2010, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, compressor, crane, electronic stability program (ESP), soot filter, MAN TGS 26.440 with Hydrodrive (front axle driven) and large MKG HMK 601 HP a4KL assembly crane with 4 thrusts up to approx. 34m high (custom-made, otherwise approx. 6m shorter) and with a hand extension approx. 39m high possible!!Net on Ebay: 154500.00,-¤!!The HMK 601 is a very strong crane and is equipped with a 4000 KG cable winch (two-strand 8000KG possible) and can be driven very precisely using the high seat or radio remote control (cross lever control) with all crane functions such as engine start/stop. The 3-axle vehicle is very manoeuvrable due to the short wheelbase and the steered rear axle, which is great for use on tight construction sites. For top stability, the rear supports can be moved and retracted again after work, which means the vehicle remains nice and short for trailer operation!!Working with supports not extended on one side, for example on The street side is also not a problem, you can easily set it on the slewing ring with a recognition via a roller switch to the respective blocked side!! The MAN has a Rockinger build with compressed air connections and is also great for trailer operation. This assembly crane is great for carpenters, timber construction, roofers and hall builders and you have a very strong assembly crane on a short chassis!! And MAN has only driven 39,000 km and the MKG crane has only been in use for around 3,700 hours!! We only sell according to our terms and conditions, which can be viewed under purchase offer coming soon!! Drfpg9

Condition: used, mileage: 49,900 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 08/2012, color: white, number of seats: 2, Year of construction: 2012, Equipment: ABS, crane, MAN TGL 8.180 with Böcker AK 35/3000 SPS from 1 ton: 115,900 euros on eBay! The crane has a maximum lifting height of around 36 m and lifts approx. 6 m - 2,000 kg, approx. 14 m - 1,000 kg, approx. 18 m - 700 kg, approx. 23 m - 450 kg, approx. 27 m - 250 kg! These load capacities are simply great for a 7.5 ton truck of this size crane. All work movements can be carried out twice/simultaneously and can be precisely controlled with a very handy radio remote control. The max. pulling force of the winch is 1,500 kg on the 1st rope layer, single strand, 2 strands with retracted boom 3,000 kg in the close range. With the 35/3000, each support can extend individually, regardless of how far from the vehicle. Depending on the support width, the crane calculates the max. load in the work area so that stability is always guaranteed, ideal on tight construction sites! The vehicle is optimal for carpenters, roofers, solar installers, etc. The truck and crane are in good condition. If you wish, we will be happy to send you a load diagram by fax or email. Please see our terms and conditions for further crane offers. Our hire purchase offer: Term 72 months, purchase rate 1500.00 €, residual value e prices net. Drdoef

Condition: used, mileage: 44,000 km, power: 260 kW (353.50 HP), overall weight: 19,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, first registration: 01/2016, total width: 2,500 mm, total height: 4,000 mm, Equipment: ABS, crane, electronic stability program (ESP), soot filter, Top Mercedes Antos 1835 with hook unwinder (14000KG) and roll-off platform with Fassi F-275A2.25E-Dynamic, cable winch and fly-jib and radio remote control with all crane functions such as engine start/stop to Ebay: 249800.00,-¤!!In addition, there is a permanently attached lifting basket on the crane for assembly work!!The Mercedes has a total vehicle length of 7.90M!!Container or platform length can be driven up to approx. 6.80m, the container platform also has a large storage box for material and tools built into the platform!!This vehicle is ideal for assembly work for all construction trades and you can pull containers and loading platforms onto the vehicle with the unwinder and also use it as a tipper!!!This unique vehicle replaces 3-4 vehicles in one and is almost in new condition!!The Mercedes has 3 seats in the Driver's cab and is equipped with an automatic gearbox and is great to drive with. Mercedes has very good features such as air conditioning and reversing camera. There will hardly be a second vehicle with this equipment and is therefore unique! We only sell according to our terms and conditions, which can be viewed under where you can also find other crane trucks on offer. The hire purchase offer will follow shortly! Brlvbjcxvo

Condition: used, mileage: 66,000 km, power: 300 kW (407.89 HP), overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Year of construction: 2009, first registration: 07/2009, next inspection (TÜV): 08/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, crane, electronic stability program (ESP), soot filter, Mercedes 2641 with large MKG assembly crane type: MKG HMK 701 a2-a3 with a lifting height of 39m!!!!!and with two handpieces 46m is possible!!!!Net on Ebay: 192600.00,-¤!!This is the largest thing that can be installed on a three-axle vehicle. The assembly crane can also be converted into a lifting platform, which is very rare for this crane size. The truck is equipped with a reversing camera and is a very good assembly crane that can be used by carpenters, woodworkers and roofers and will probably rarely reach its limits!!!The high bending edge (eaves) is approx. 24m!!All crane functions are operated by the HBC radio remote control, which is very precise and quiet. The cable winch has 4000 KG pulling force on the 1st cable layer (high-speed cable winch from Zollern) and can pull 8000 KG with the pulley 2 Pull firmly!!! The crane truck has a ball bearing continuous slewing mechanism with an automatic control pump with load sensing control (various crane functions can be operated at the same time), mobile counterweight, gas supply, crane support plates 39m high and 8m reach 2000 KG, at 29m high and 13m reach 2050 Kg, 26m high and 23m reach 1000 KG!!! At 20m high and 28m reach 700 KG!!! The vehicle can be used immediately and has all the necessary approvals. The truck is currently registered as a self-propelled work machine and is therefore completely tax-free, toll-free, exempt from environmental zones, no speed test!!! The vehicle can, however, be registered as a truck with trailer operation without any problems (the vehicle is 10m long), and you could also tow a decent trailer with it, it has Euro 5!! The truck is equipped with an automatic transmission and is therefore completely Easy to use, even for less experienced drivers (tradesmen are not long-distance drivers). We only sell according to our terms and conditions, which can be viewed at - our hire purchase offer will follow shortly!! Dras97

Condition: used, mileage: 210,000 km, power: 353 kW (479.95 HP), overall weight: 32,000 kg, fuel type: diesel, color: silver, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro4, first registration: 05/2009, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN TGS 35.480 8x4 tractor unit with Palfinger assembly crane!!! Equipped with a heavy-duty class Palfinger crane, type: PK 85002 F with Fly-JiB PJ 170, 7-way main arm and 6-way extendable on the Fly-Jib, hydraulic hoe height approx. 35m!!Net on eBay: 229,500.00 EUR!!The MAN has an inclined support at the front (very expensive to build), can rotate 360 degrees, the platform length is 3.60 m, the payload is 5300 kg!!The truck and crane have always been serviced and are in excellent condition!! The MAN is equipped with a Rockinger compressed air connection for trailer operation and the vehicle can be used for all material transport such as timber framing, wooden walls. The Palfinger crane is operated via radio remote control (cross lever control) with all crane functions such as engine/start stop etc. The crane can be operated precisely and very sensitively. The vehicle is ideal for use for carpentry, timber construction, hall construction and assembly work as the crane has real power. We would be happy to send you a load diagram by email! The MAN still has Austrian registration and can be re-registered there without any problems and the vehicle will receive a full inspection for Germany. § Sales only in accordance with our terms and conditions, which can be viewed under where you can also find other crane offers. Our hire purchase offer: coming soon!! Bkwisu7Wcg

Condition: used, mileage: 10,900 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, color: silver, first registration: 06/2020, total width: 2,150 mm, total height: 3,130 mm, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, bathroom, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Top La Strada EB with the strong 6 cylinders in new condition rzeug has a dark gray / black leather interior and electric lifting supports aluminum rims are with wheel spacers and all-season tires La Strada is thus super on the road and with the automatic is like S-Class e stationary air conditioning is also installed have the vehicle eigenlich only used for traveling because we have no camper lenfahrzeug, non-smokers and no pets!!! Pictures, equipment, etc. we can send you on request with pleasure.TÜV and inspection have come completely new at Mercedes-Benz. Dqwtlp

Condition: used, mileage: 98,000 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 09/2008, next inspection (TÜV): 01/2025, color: blue, number of seats: 2, Year of construction: 2008, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Mercedes 818 with Böcker AK 32/1500 crane has a max. lifting height of approx. 32m and lifts approx. 7.5m-1500kg, approx. 13m-1000kg, approx. 17.5m-700kg, approx. 23m-450kg, approx. 27m-250 kg!! These load capacities are simply great for a 7.5 ton truck, this crane size. Net on eBay: 86500.00,-¤!! All work movements can be carried out twice/simultaneously, and can be controlled precisely with a very handy radio remote control. The crane is equipped with a work basket (with 230V connection for angle grinder, drill, etc.) with which the crane can be converted into a fully-fledged aerial work platform for 2 people in no time. The maximum pulling force of the winch is 1500kg on the first rope layer. With the 32/1500, each support can be extended individually, no matter how far from the vehicle. Depending on the support width, the crane calculates the maximum load in the work area so that stability is always guaranteed, ideal on tight construction sites! The vehicle is optimal for carpenters, roofers, solar installers, etc. The truck and crane are in a well-maintained trestle crane and the Mercedes are very well looked after and there is no backlog of repairs as a lot has been done in the last 2-3 years (invoices available). If you wish, we will be happy to send you a load diagram by fax or email. Sales can only be viewed in accordance with our terms and conditions, where you can also find other crane offers. Our hire purchase offer: Term 54 months, purchase rate 1400.00, residual value and net prices. Dqwtlz

Condition: used, mileage: 111,000 km, power: 324 kW (440.52 HP), overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, brakes: retarder, emission class: euro6, Year of construction: 2016, first registration: 01/2016, total width: 2,500 mm, total height: 3,900 mm, Equipment: ABS, crane, electronic stability program (ESP), soot filter, MAN TGS 26.440 6x4 with Palfinger assembly crane from a first hand!!! Palfinger crane in the heavy-duty class, equipped with a PJ 125E fly jib, 6-fold main boom and 6-fold extendable on the fly jib, hydraulic hook height approx. 33m, optionally available with 2x mechanical extensions approx. 37m! Net on eBay: €262,800.00!! The MAN has inclined outriggers at the front (special construction), can rotate 360 degrees, and has outrigger monitoring. Depending on the outrigger width, the crane automatically limits the maximum load!! The truck and crane have always been serviced and are in excellent condition. The MAN is equipped with a Rockinger tow bar with compressed air connections for trailer operation. The Palfinger crane is operated via radio remote control (cross lever control) with all crane functions such as engine/start/stop etc. The crane can be operated precisely and very sensitively. The crane is equipped with a personnel safety mode, P-fold (automatic folding/unfolding), automatic rope tracking (crane rope can always stay in place right up to the tip, short setup time) and other extras. The vehicle is ideal for carpentry, timber construction, hall construction and assembly work as the crane is really powerful. We would be happy to send you a load diagram by email. Sales exclusively subject to our terms and conditions, which can be viewed under where you can also find other crane offers. Our hire purchase offer: Term 72 months Purchase rate 3300.00 ¤, Residual value 30 e Net prices. Qpp2W2Kt8

Condition: used, mileage: 421,000 km, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, loading space width: 2,500 mm, loading space length: 3,800 mm, Year of construction: 2011, first registration: 08/2011, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Scania G480 tractor unit with large Palfinger PK 42002 Performance with cable winch and fly jib, 6-fold extension on the main boom 3-fold on the jib (2 handpieces are still possible then the crane reaches a maximum hook height of approx. 35m! Net on eBay: 159900.00,-¤!! Radio remote control with cross lever control from which all crane functions are operated! The MAN has an auxiliary platform above the fifth wheel plate with a length of approx. 3.80m! The truck is equipped with jaw couplings with compressed air connections for trailer operation. The crane has 4-fold support and is therefore very stable and the crane can also work above the driver's cab with the ball-bearing endless slewing mechanism. There are sufficient storage boxes on the vehicle. The truck has a large long-distance driver's cab with everything you need. A diagram for the Palfinger crane can be emailed to you on request. Scania with The assembly crane is ideal for carpentry and roofing, hall construction, timber construction, and steel construction, and can tow all trailers for material transport. The Scania still has registration for Austria, where it can also be registered as such, and for Germany, the Scania receives a full inspection in accordance with §21. We sell exclusively subject to our terms and conditions, which can be viewed at, where you can also find other crane offers. Our hire-purchase offer: 54-month term, purchase rate of €2,490.00. Residual value 30%. All prices are net. Dqwtmd

Condition: used, mileage: 25,000 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 05/2014, color: white, number of seats: 2, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, crane, electronic stability program (ESP), MAN TGL 8.180 with Böcker AK 35/3000 SPS from 1. Ebay Net: 129,500.00 €!! The crane has a max. hook height of approx. 36m and lifts approx. 6m-2000kg, approx. 14m-1000kg, approx. 18m-700kg, approx. 23m-450kg, approx. 27m-250kg!! These load capacities are simply great for a 7.5 tonne truck of this crane size. All work movements can be carried out twice/simultaneously and can be controlled precisely with a very handy radio remote control. The max. pulling force of the winch is 1500kg on the 1st rope layer, single strand, 2 strands with retracted boom 3000kg in the close range. With the 35/3000, each support can extend individually, regardless of how far from the vehicle. Depending on the support width, the crane calculates the max. load in the work area so that stability is always guaranteed, ideal on tight construction sites! The truck is equipped for trailer operation and has a ball head trailer coupling. The vehicle is optimal for carpenters, roofers, solar installers, etc. The truck and crane are in good condition. If you wish, we will be happy to send you a load diagram by fax or email. Our terms and conditions can be viewed at: where you can also find other crane offers. Our hire purchase offer: Term 72 months Purchase rate 1850.00 € Residual value Net prices. Qpsvd3Ce3