Used Other farm machinery for sale (608)

Condition: used, Year of construction: 2022, EC-STEER IC-LIGHT Lemken hoe, sliding frame Coljq H Aq Ajitbdnegt in standard equipment, additionally with: Three-point linkage cat. 2 IC-Light steering system (1x camera, joystick, terminal) Support wheel: 2x rubber 62x21 cm 4x parking support with height adjustment

Condition: used, Year of construction: 2014, on side rakes Celitbdouhr Dgenjgt

Condition: used, next inspection (TÜV): 03/2027, Chemo water barrel * 2800 liters * Barrel: oval made of glass fiber reinforced plastic GRP * Dimensions: 2760 x 1430 x 1308 mm * 1-axle * galvanized * TÜV 03/2027 * Support wheel * Vacuum pump * PTO * 80 km/h * 13-pin connector * Automatic heavy-duty support wheel * Drain hose * Filling hose * Overrun brake ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired !!! Cgolitenm Ap Esbdnst Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 9 a.m. to 5 p.m., Saturday 9 a.m. to 2 p.m. Over 500 new and used trailers always in stock!!! Legal notice: Pegasus Trailer LTD Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, Year of construction: 2024, operating hours: 300 h, working width: 10,700 mm, Number of rotors: 10 | Claas Volto 1100 T demonstration machine used from 2024 warranty until June 18, 2025 equipment: 10.70 m working width 10 rotors with 1.50 m diameter headland lifting, hydraulic impact cloth for edge spreading limitation, hydraulic swiveling Cgslitjv Aqqasbdnet lower link attachment cat. II | internal number: 11181002

Condition: used, Year of construction: 2020, working width: 1,800 mm, CARAT 1800 010 used Sauerburger side mulcher 020 Year of manufacture: 2020 030 Working width: 1.80 mtr 040 Hammer flail 050 Support roller 060 PTO shaft 070 Warning signs with lighting Used items special regulation. The sale is made in accordance with Section 25a of the VAT Act - differential taxation. VAT cannot be shown. Cgslitbsugpckjdnjt

Condition: used, Year of construction: 2020, used Reiter belt rake belts new/unused Original retrofit kit from Reiter Welded in by the manufacturer Cgslitboutuacodnst Pick up tines worn

Condition: new, next inspection (TÜV): 09/2025, * Horse treadmill * Roller treadmill * NEW * Overall dimensions: 3250mm x 1300mm x 1700mm * Electric motor * 380V * Front and rear flap * Chest and rear bars * Beck+Heun system * AutoStop with light barrier * Various speeds ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Trailers Cslitjmigy Dobdnjgt Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, Year of construction: 2021, working width: 10,700 mm, Number of rotors: 10 | Claas Volto 1100 T 1,500 hectares 10.70 m working width 10 rotary tedders with chassis hydraulically pivoting impact screen headland excavation Celitev Aqqmjbdnsgt lighting | Internal number: 11018752

Condition: new, Year of construction: 2023, working width: 3,000 mm, ZL 300 Moderntech push broom Cgsljtw Hw Asitbdnjt 3-point pick-up Pallet fork attachment Mounting on bucket possible Parking bracket right and left 7 rows of brushes

Condition: used, first registration: 10/2019, next inspection (TÜV): 03/2025, axle configuration: 2 axles, Water barrel Capacity: 2000 liters Tandem chassis Coupling drawbar eye Self-watering trough Turntable Cslijhlr Udetbdnogt ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00 o'clock, Saturday 8.30 to 14.00 o'clock over 500 trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, Year of construction: 2008, Weidemann Hofalder 3070 CX Year of manufacture 2008 9400 hours not used in the stable incl. shovel, pallet fork and broom Cjliov Aqt Ietbdnsgt 20 km/h lighting system hydraulic locking 3rd function | Internal number: 11268107

Condition: new, Year of construction: 2023, TWS 700 E Binderberger table tilting circular saw with standard equipment 5.5KW electric motor 400V 16A Cgoliterp Duxebdnst mechanical brake mechanically operated rocker transport trolley weight 215kg Accessories: Carbide saw blade, 700mm, 42 teeth

Condition: used, Year of construction: 2010, power: 6 kW (8.16 HP), Horse-Gym-2000 Horse treadmill * Horse treadmill * Plate treadmill * Horsetrainer * Electric motor * 380V * 5,5kW * Year of construction 2010 * Flap front & rear * Chest and rear bars * AutoStop with light barrier * Various adjustable speeds Overall dimensions: * approx. 3530mm (with closed flaps) x 1420mm (with up and down bars) x 2000mm * approx. 6170mm (with both flaps open) x 1500mm (with control cabinet) x 2000mm * Space requirement/footprint: LxWxH = approx. 10,000mm x 2,000mm x 3,000mm Weight: 1500kg S3 walking conveyor Innovative cutting-edge technology, maximum comfort, particularly low-noise and low-maintenance. The Standard Automatic model is ideal for training dressage, show jumping and driving horses. incl. two ramps * incl. full galvanization * incl. electric height adjustment * incl. digital display * incl. 9 programs with four running times each * incl. rear lifting aid * incl. up & down bar EQUIPMENT: Unique grass/forest floor technology Soil quality resembles that of a naturally grown grass/forest floor * Even and flat footing * For optimum movement of the horse Two-frame system with height adjustment With electric height adjustment up to 10° degrees * Galvanized steel construction frame * Robust two-frame system * Low maintenance Delayed start and soft stop Significantly increases safety * Jerk-free starting and braking * Emergency stop * Digital display Non-slip ramps Two extra-flat ramps for upward and downward travel * With non-slip floor covering * Constructed for easy access * Foldable Guide rails Even and flat footing * Safe walking * Protects against wear * Durable Shatterproof side panels Pleasant feeling of space * Break and impact resistant side walls * Protection against injuries * Easy to clean We can also offer you this treadmill in NEW! ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. Cjliovh Eggetbdnsgt We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 9.00 to 17.00, Saturday 9.00 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Trailers Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, Year of construction: 2024, Perfect RX-620 trailed double flail mower Cgsljv Aqrwoitbdnot 6.20 m working width 1000 rpm gearbox PTO shafts Tires 15.0 / 55-R17 from 150 HP power requirement 3,420 kg dead weight | Internal no.: 11212210

Condition: new, Year of construction: 2023, working width: 3,000 mm, ZL 300 LONG Moderntech push broom 3-point pick-up Pallet fork attachment Mounting on bucket possible Cgjlier H Etpstbdnet Parking bracket right and left 13 rows of brushes

Condition: used, Year of construction: 2023, working width: 13,000 mm, Number of rotors: 10 | used Claas Volto 1300 T Cslitbdjv Aqqgenogt Year of manufacture 2023 Used in 2024 Guarantee valid until June 28, 2025 Technical data and equipment: Working width 13.00 m 10 rotors with a diameter of 1.70 m Double feeler wheel Lower link attachment Cat. II Hydraulic headland lift Hydraulic swivel edge spreading cloth | Internal number: 11181001

Condition: new, Year of construction: 2023, working width: 6,000 mm, ORIGINAL HARVESTING 6.00 M Hatzenbichler original harrow Working width 6m with central tube frame hydraulically foldable height-adjustable ball-bearing support wheels field tines tine thickness 7mm tine length 450mm protected spring coil (no damage to the plant tips) central adjustment of the tines Celitstydbwebdnsgt (10-hole adjustment) movable harrow field (best ground adaptation) transport lock - using locking valve no rigidly locked side arms (best ground adaptation) ground-adaptable base frame with additional pressure from the pressure accumulator line spacing 2.5cm transport width 3m

Condition: used, Year of construction: 2009, working width: 14,000 mm, Krone Swadro 1400 Cgslitev Aqp Nobdnot Year of manufacture 2009 incl. control terminal incl. PTO shaft Single rotor lift Lower linkage attachment | Internal number: 11267061

Condition: used, Year of construction: 2019, TRANSPORT TROLLEY Claas cutterbar transport trolley in standard equipment Cslitbdsqk Rrhonjgt overrun brake 40 km/h Vario/Cerio/Maxflex for 7.50/ 7.70m

Condition: new, Year of construction: 2024, multifunctional side mulcher PERFECT ZW 240 Year of manufacture 2024, new machine technical data: 2.40 m working width 540 rpm 80 HP power requirement Cgjlitjv Aqrdobdnet 24 flails 0.9 kg can be used both as a side boom (through hydraulic side shift) and behind the machine incl. freewheel universal joint shaft | Internal no.: 11212324

Condition: used, Year of construction: 2015, working width: 7,700 mm, VOLTO 800 used Claas 6-rotor tedder Cgolitbdstwf Rzsnjt in standard equipment Rotor body with 7 tine arms each CKL damper system Permalink Tine loss protection MAX SPREAD crop flow concept Incl. PTO shaft

Condition: new, Year of construction: 2023, operating hours: 1 h, Schäffer 3650 with cabin Kubota diesel engine D1803 = 50 HP hydraulic tool locking technical data: lifting height (tool pivot point) 2,950 mm Cgelitbdsv Aquxenet tipping load straight, with pallet fork 1,267 - 1,580 kg empty weight 2,850 kg equipment: rear weight end plate hydraulic tool locking fast gear 20 km/h operating manual additional equipment wide axles including rear carriage case weight 100 kg TÜV certificate self-propelled work machine battery main switch towing device with bolts and lashing eyes tires 15 AS 6 hole | internal no.: 11141039

Condition: used, Year of construction: 2008, VOLTO 870 (10.5) used Claas tedder in standard equipment Cjlsupayyeitbdnjgt 8 rotors hydraulic impact cloth

Condition: new, Year of construction: 2023, operating hours: 1 h, Schäffer 3650 Farm loader Year of manufacture 2023 approx. 3 operating hours New machine Coliev Aqu Estbdnegt Technical data: Lifting height (tool pivot point) 2,950 mm Tipping load straight, with pallet fork 1,267 - 1,580 kg Empty weight 2,700 kg Equipment: Driver's canopy with restraint system Kubota engine D1803-CR with 28 kW / 38 HP Rear weight plate Fast gear 20 km/h Case weight 100 kg Battery main switch Towing device with bolt and lashing eye Tires 15.0/55-17 AS Tool holder SWH, with hydraulic locking | Internal no.: 11141044

Condition: new, Year of construction: 2024, Perfect rear mulcher KP-180 Year of manufacture 2024, new machine without use Cat I + II attachment 28 HP power requirement 465 kg dead weight 18 flails (0.9 kg) Cgslitbdsv Aqtnsnjt including PTO shaft | Internal no.: 11212945