Lowbed

Humbaur Humbaur 3-Achser Tieflader Parabelfederung, 12-24V-LED+Zink+Warnp.

Overall weight: 30,000 kg, maximum load weight: 23,500 kg, axe configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: Chjktjvw * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 24,000 kg, axe configuration: 3 axles, first registration: 02/2008, Condition: used, Humbaur low loader 3 axle - Pre-fitting for widening - Unladen weight 6,920 kg - Tüv and SP expired - SAF axles Dppijz - Tires : 285 / 75 R 17,5 - Drum brakes Subject to errors and prior sale . Internal vehicle number : 9898

Overall weight: 30,000 kg, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM Bgcad8Wlcf => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 21,000 kg, maximum load weight: 16,400 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist R7Brt ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Empty load weight: 11,000 kg, maximum load weight: 25,000 kg, axe configuration: 3 axles, first registration: 08/2022, next inspection (TÜV): 10/2022, suspension: air-lift, color: light grey, tire size: 235/75r17.5, Year of construction: 2023, Condition: new, Equipment: ABS, Low bed suitable for 3 axle vehicles Cyisowljw

Overall weight: 30,000 kg, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: full air, tire size: 235/75 r17,5 zoll, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: P2Qp9 Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 3,500 kg, empty load weight: 700 kg, maximum load weight: 2,800 kg, loading space length: 3,050 mm, loading space width: 1,700 mm, loading space height: 500 mm, first registration: 01/2011, Year of construction: 2011, Condition: used, Construction machinery trailers: Bttpfks0 - Gourdon - Type: GPA350 - Year of construction 2011 - towing eye - overrun braked - fully galvanized - Folding aluminum ramps, 180cm x 30cm with support - max. load per ramp: 1,785kg; max. total load (2 ramps): 3,570kg - track each 305cm x 50cm - open width (center of trailer): 67cm - Total width inside: 170cm Total trailer dimensions: 536cm x 234cm - Unladen weight: 700kg; permissible GG: 3,500kg - Height-adjustable drawbar - Spare wheel - Lashing eyes - Tandem axle - Loading height: 50cm; loading height in wheel recess: 43cm - Wheel recess distance: center - center: 215cm; wheel recess length 30cm each - Trailer from 1st hand - MULTIPLE MODELS IN STOCK You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Overall weight: 1,900 kg, maximum load weight: 14,500 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing Cp0Uerdhjh * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 24,000 kg, empty load weight: 5,680 kg, maximum load weight: 18,320 kg, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air-lift, tire size: 205/65 r17,5, Year of construction: 2023, Condition: new, Equipment: ABS, Three-axle trailers BPW low-loader axles Electric air suspension with 2 ride heights Lowering function for safe loading Brake system according to EC guidelines with 2S/2M Drawbar with drawbar eye d=50 mm Raising and lowering of the drawbar 8 pairs of lashing rings 10 tons sunk into the drop deck 6 pairs of lashing points 2 to above wheel cut-out 5 pairs of lashing/stake pockets 3 tons for 90x50 mm stakes 50 mm softwood decking Hot-dip galvanized chassis frame Folding side collision protection Hdtl7Td Stake pocket package in the outer frame One-piece hot-dip galvanized drive-on ramps laterally movable Direct-acting vertical spring jacks

Overall weight: 40,000 kg, maximum load weight: 31,300 kg, axe configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, Gross vehicle weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized in an immersion bath Bogie frame hot-dip galvanized in an immersion bath Drive-on ramps hot-dip galvanized in an immersion bath Air suspension with manual rear HECK lowering SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 16-ply Drop deck length approx. 7160 mm Trough for excavator stick support, approx. 3000 mm x 730 mm x 180 mm in the rear low bed area 4 pairs of lashing rings 10 to. sunk into the drop deck 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. in the low bed outer frame 3 pairs of lashing eyes 6 to. on the outer frame 4 pairs of stanchion pockets in the outer frame High bed 4 pairs of stanchion pockets in the low bed outer frame 3-meter widening package with folding boom without slope 4 x warning signs with lighting Rotating beacon at the rear Storage compartment under the cargo bed 2 storage compartments with hinged lid in the high platform Hydraulic ramp jacks 1-section ramps approx. 3150 x 750 mm Softwood flooring for cargo bed and ramps Cp0Uhg7Z7Q 40,000 kg GVW only with exceptional approval according to §70 ∗Storage vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 13,000 kg, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, axe configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks Cp0Ub2Iuu8 * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 21,000 kg, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, axe configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air/air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm Cnbodj2Wyv * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 21,000 kg, maximum load weight: 16,200 kg, axe configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Cp0T8I0Res --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 48,000 kg, maximum load weight: 38,000 kg, axe configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, HUMBAUR 3-axle low loader semi-trailer with offset loading area, Typ. HTS30K-V44+ --- INCLUSIVE lift axle INCLUSIVE self-steering axle with SAF air suspension INCLUSIVE 3-meter package INCLUSIVE stowage box under cargo bed INCLUSIVE TIM/WABCO Smart Board for axle load display INCLUSIVE Hot-dip galvanized chassis INCLUSIVE ALU drop sides and stowage box to the semi-trailer platform INCLUSIVE stake pockets and lashing ring package INCLUSIVE excavator trough Equipment: V44+ * Gross vehicle weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized * SAF air suspension unit including lifting and lowering * INCLUSIVE hot-dip galvanized chassis * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * LED lighting system * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Drop deck length approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * Excavator trough * 2" kingpin can be offset by 340 mm for 2+3-axle SPM * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Ramp rail at the offset to the gooseneck * 3 pairs of lashing rings 6 tons sunk into the raised bed Gf2Hnj9 * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the low bed outer frame * 3-meter widening package with folding boom, wooden planks * Sheet steel toolbox under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Warning package with lighting * Rotating beacon at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Softwood flooring on ramps, low loading & semi-trailer platform * Spring lifting gear to the ramps * COC papers * 48,000 kg GVW only with special permit according to §70 * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Example pictures - equipment may vary ! ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 48,000 kg, maximum load weight: 37,460 kg, axe configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, HUMBAUR 3-axle wheel well low loader semi-trailer with offset loading area, Typ. HTS30K- wheel recesses --- INCLUDING lift axle & self-steering axle with SAF air suspension INCLUSIVE rubber coverings on ramp and rear slope INCLUSIVE ALU drop sides and tool box on the high platform INCLUSIVE 3-meter package INCLUSIVE excavator trough INCLUSIVE large hydraulic package (hydr. ramp lift, hydr. side shift & hydr. rear support) Equipment: V41 * Permissible total weight 48,000 kg * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible surface finish in RAL * SAF air suspension unit including lifting and lowering * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * Excavator stick support approx. 3,000 mm long * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Length of drop deck approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * 2" kingpin can be offset by 340 mm for 2+3 axle SZM * Wheel recess depth 390 mm at the front and 320 mm at the rear for various wheelbases * Wheel recess extension parts with hardwood covers * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Spare wheel holder for bulkhead incl. e-wheel * 3 pairs of lashing rings 6 tons sunk into the high bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 5 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the outer frame low bed * 3 pairs of lashing eyes 6 to. in the excavator stick support * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted as a storage compartment for wooden planks on the side under the cargo bed * Warning package with lighting * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Rubber covering on ALU panels on ramp and ramp slope * Softwood flooring on low loading & semi-trailer platform * Hydraulic ramp lifters * Hydraulic side shift D0Z9Mm * Hydraulic rear support * COC papers * 40,000 kg GVW only with special permit according to §70 * 1 pair of ALU ramps to the high plateau * 1 pair of galvanized load guide rails * Gallows suspension for supply lines * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 * ECE plate at the rear ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 11,900 kg, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, axe configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-over with ramp shaft, Typ. HBT 106224 BE (planks can be pushed in) INCLUDING side walls made of aluminium, anodized INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,400 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,140 x 2,550 x 1,400 mm Cp0Ua8Vdy2 * Aluminium drop sides, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Lockable mounting shaft for optional aluminum ramps in the chassis frame * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * BPW axles * 6 pcs. 6 t lashing rings countersunk * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Lockable pick-up shaft * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 11,900 kg, maximum load weight: 9,500 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS Cp0Uj3Ymrz --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 10,500 kg, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, axe configuration: 2 axles, loading space length: 5,040 mm, loading space width: 2,420 mm, first registration: 02/2022, suspension: steel, tire size: 235/75R17,5 140J, wheelbase: 990 mm, color: other, Condition: used, gearing type: other, front tire size: 235/75R17,5 140J, rear tire size: 235/75R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, surcharge for ramps: 800 ¤ , , Vehicle is sold and offered on commission, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ckqgqvglcg

Overall weight: 1,000 kg, axe configuration: 1 axle, maximum load weight: 789 kg, empty load weight: 211 kg, tire size: 13 zoll, loading space width: 1,365 mm, loading space length: 2,095 mm, loading space height: 70 mm, Condition: new, - Price incl. letter and VAT. - Vehicle equipment: 13-pin plug, 10 lashing eyes for load securing, 3 stand rails with bracket mounted, 1 loading ramp integrated in the plank shaft. - Collection in Frankfurt am Main. - With COC papers and EC certificate Subject to prior sale, changes, errors, mistakes and price changes. WESTFALIA-EICHMANN - We LIVE trailers! Your trailer specialist in the Rhine-Main area We look forward to seeing you! Ider238Vg This is WESTFALIA-EICHMANN: Trailers, spare parts, bike racks, roof boxes, workshop service and and and... visit us in our sales store or on our homepage We always have over 200 trailers in stock - from unbraked to braked, from single-axle, tandem, box, vehicle transporter to dropside etc. Even special solutions are no problem for us! Furthermore, with over 80 rental trailers, we have one of the largest fleets in the Rhine-Main area. There is sure to be something for your transportation problem! We have over 80,000 different trailer spare parts and accessories in our well-stocked warehouse. With us, your car and trailer are in the right hands! Coupling assembly, trailer repairs, inspections, TÜV approval, axle repairs, etc. Talk to us! We will be happy to help you!

Overall weight: 3,500 kg, maximum load weight: 2,600 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Condition: new, Humbaur three-way tipper HTK 3500.31 electrically tiltable permissible total weight: 3,500kg Internal box dimensions: 314x175x35cm (LxWxH) Equipment: * electrically tiltable with emergency hand pump * Rear swinging tailgate * Integrated ramp shafts * Chassis and tipper body welded and hot-dip galvanized Dqmjhx * 2mm galvanized steel floor * 6 lashing eyes embedded in the loading area (800 kg per eye) * Aluminum drop sides 350 mm foldable and removable all round * Automatic support wheel * Lighting protected in the underride guard * 3-stage telescopic cylinder * 195/50 R13C tires * Braked with automatic reverse drive * 13-pin plug with reversing light * Maintenance-free rubber spring axles with independent suspension Accessories subject to surcharge: * 100 km/h conversion for 250,- Euro incl. VAT * Grid attachment (60 cm) for 1,299 euros incl. VAT * Aluminum attachment walls for 949,- Euro incl. VAT * Set of crankable rear supports for 250 euros incl. VAT * Aluminum ramps (2,800 kg load capacity/pair) for 795 euros incl. VAT * High tarpaulin and bows on request Sales, advice and collection in Zell by appointment. Please note that due to the current shortage of materials at the suppliers, the offer prices for trailers, accessories and construction components may currently vary due to material surcharges. Subject to prior sale and errors excepted. Please ask for availability and final prices. Constantly large selection of new car trailers of the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Can also be ordered online. We are happy to provide you with our transfer license plate for 20 euros for home transport. Delivery within Germany possible for an extra charge!

Overall weight: 750 kg, maximum load weight: 630 kg, axe configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,095 mm, Year of construction: 2024, Condition: new, Humbaur Steely Series 1000 NEW 2024 2nd choice 1-axle box trailer Total weight: 750kg Unladen weight: 120 kg Payload: 630 kg Overall dimensions: 2960mm x 1545mm x 805mm Interior dimensions: 2050mm x 1095mm x 300mm Loading height: 495mm 13 inch tires 100 km/h Hot-dip galvanized V-drawbar with cross brace Tension locks on the tailgate Four tie-down rings fixed to the side walls Optional: - Tarpaulin bows -Side wall attachment -flat tarpaulin -support wheel -Net TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 Ckdlz00Iim always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 48,000 kg, maximum load weight: 36,870 kg, axe configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 870 mm, Year of construction: 2023, Condition: new, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, WhatsApp HUMBAUR low-loader semi-trailer 3-axle HTS GermanNEW vehicle with absolutely full equipment: Frame: Solid welded construction made of high-strength fine-grained steel Stretched cross members for maximum stability Chassis frame hot-dip galvanized 2? kingpin can be offset by 340 mm for 2+3-axle SZM Floor with 50 mm hardwood covering Wheel cut-outs above the rear wheels Steel mudguards with anti-spray system Climbing rails at the rear on the ramp ?maximum safety during loading and unloading 3x10t SAF low-loader axles with closed S-cam brakes Air suspension unit including lifting and lowering WABCO SmartBoard Spring-loaded parking brake WABCO EBS brake system in accordance with EC directives Lashing rings 6 t recessed in the high bed 3 pairs of lashing rings 3 t in the raised bed outer frame 5 pairs of lashing rings 10 t recessed in the low bed 6 pairs of lashing points 3 t in the low bed outer frame One-piece hot-dip galvanized access ramps with solid rubber coating Can be moved sideways hydraulically Hydraulic direct-acting lifting cylinders Secured by turnbuckle and counter stop Folding side collision protection 2 wheel chocks with holder 15-pin socket LED multi-chamber lights in 24 V, shock-resistant and dampened, protected in the underride guard Retroreflective contour markings in accordance with ECE Directive R 48 white at the sides, red at the rear Spare wheel + spare wheel holder at the front on the bulkhead EG+Duomatic coupling Lift and self-steering axle Removable rotating beacon Working lights E2Kape2Wv Additional reversing lights Wheel recesses front and rear Aluminum drive-on ramps to the raised bed Trough for excavator stick storage Overwidth warning package with warning signs Electrical system and rotating beacon Load securing rails for tracked vehicles Additional lashing eyes in the low bed in the high bed and in the outer frame Rubber coating on ramps and loading area Various stake pockets Frame with preparation for container locking Storage boxes front and center 3 m widening Hydraulic ramp jacks, support legs and side shift Aluminum drop sides for high bed Aluminum storage compartment on high bed SK height 1250-1300 mm K height CONDITION ABSOLUTELY NEW VEHICLE without initial registration Condition according to age + mileage VERY GOOD! "EC Declaration of Conformity COC" or "EC Individual Approval" EUROPE-WIDE TRANSPORT AND DELIVERY POSSIBLE All information without guarantee! ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polski, Romania, Russia, English, All information without guarantee!

Overall weight: 3,500 kg, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, axe configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur HTK 3500.31 Three-way tipper Car trailer Age: New (year of production: 2024) 2 years general inspection from the date of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: approx. 6 weeks after receipt of order (non-binding) Financing possible via our partner banks! Technical data Permissible total weight: 3,500kg Unladen weight: approx. 1,010kg Payload: approx. 2,490kg Number of axles: 2 Load compartment length: 3,130mm Load compartment width: 1,740mm Load compartment height: 400mm Brake type: Braked, overrun brake Dqkvwv Chassis: High loader (wheels under body), rubber suspension axles Electrics: 12V, 13-pin plug Tire size: 195/50 R13 Features Tipping function via hydraulic pump (electric / electric pump) Emergency hydraulic pump (mechanical / hand pump) Ramp shafts Steel floor plate Fuhrmann profile drop sides made of galvanized sheet steel Drop sides foldable and removable Rear dropside as flap or swing flap Automatic support wheel Lashing eyes Welded and galvanized frame V-drawbar AL-KO or Knott axles and brake system Accessories (subject to surcharge) 100km/h certificate incl. retrofitting 4x wheel shock absorbers Aluminum ramps Silver / Black aluminum rims Parking supports Trailer net Trailer lock Bluetooth receiver for electric pump H-frame Height-adjustable drawbar Wheel set 185 R14C Spare wheel 195/50 R13 incl. holder Tractor connection for hydraulic pump Tensioning strap Steel dropside attachment 40cm (Fuhrmann profile) Vehicle delivery throughout Germany Registration throughout Germany Transfer license plate (valid for 5 days) Please note Weight specifications may vary depending on equipment, errors, prior sale and changes reserved! Condition, drivability: roadworthy, warranty: vehicle warranty from the manufacturer

Overall weight: 10,000 kg, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, axe configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, first registration: 08/2011, suspension: steel, tire size: 235 / 75 R 17,5, color: other, Condition: used, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Dqlr0B

Overall weight: 3,000 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Condition: new, Humbaur three-way tipper HTK 3000.31 electrically tiltable permissible total weight: 3,000kg Internal box dimensions: 314x175x35cm (LxWxH) Equipment: * electrically tiltable with emergency hand pump * Rear swinging tailgate * Integrated ramp shafts * Chassis and tipper body welded and hot-dip galvanized * 2mm galvanized steel floor * 6 lashing eyes embedded in the loading area (800 kg per eye) * Aluminum drop sides 350 mm foldable and removable all round * Automatic support wheel * Lighting protected in the underride guard * 3-stage telescopic cylinder * 195/50 R13C tires * Braked with automatic reverse drive * 13-pin plug with reversing light * Maintenance-free rubber spring axles with independent suspension Accessories subject to surcharge: * 100 km/h conversion for 250,- Euro incl. VAT * Grid attachment (60 cm) for 1,299 euros incl. VAT * Aluminum attachment walls for 949,- Euro incl. VAT * Set of crankable rear supports for 250 euros incl. VAT Dqmja2 * Aluminum ramps (2,800 kg load capacity/pair) for 795 euros incl. VAT * High tarpaulin and bows on request Sales, advice and collection in Zell by appointment. Please note that due to the current shortage of materials at the suppliers, the offer prices for trailers, accessories and construction components may currently vary due to material surcharges. Subject to prior sale and errors excepted. Please ask for availability and final prices. Constantly large selection of new car trailers of the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Can also be ordered online. We are happy to provide you with our transfer license plate for 20 euros for home transport. Delivery within Germany possible for an extra charge!