Tipper- three-way

Humbaur HUMBAUR 7,5 to Tandem-Dreiseitenkipper mit Rampenschacht, Typ. HTK 754020 Premium

Overall weight: 19,000 kg, maximum load weight: 14,600 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air/air, tire size: 385/65 r22,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake Cp0Ukzl7N3 INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 18,000 kg, maximum load weight: 13,700 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, tire size: 435/50 r19,5, color: white, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 18.0 to tandem three-way tipper with ramp shaft, Typ. HTK 185024 Premium --- INCLUDING SAF air suspension with lifting & lowering function INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR including lockable ramp cover with lid (privacy screen) Equipment: * Permissible total weight 18,000 kg * Payload approx. 13,700 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,135 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,750 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides in the desired color (RAL 9010 pure white) or hot-dip galvanized * Laser-welded quality steel drop sides, 600 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking bolted on * Removable rear stanchions * Dropside lifting springs on the side drop sides * Drawbar with spindle infinitely height-adjustable for coupling heights unbel. approx. 840 - 1,100 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t geared support winch with load and fast gear * SAF air suspension with lift & lower function * 10 6 t lashing rings recessed * Lateral / rear tipping angle: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system * EBS brake system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 435/50 R19.5 tires * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Hckj2Fwne Your advantages: * Optimum corrosion protection through hot-dip galvanizing * Lower loading height thanks to the 435 tires * Safe loading and unloading thanks to telescopic folding supports at the rear * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t or 13 t/pair) with pin lock, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65-75 kg/each) * Plastic toolbox mounted under the loading area * LED rear lights 24 Volt or LED multi-voltage system for 12&24 Volt ∗Stock vehicle - available immediately ∗Subsequent sale reserved ∗Price ex works

Overall weight: 13,000 kg, maximum load weight: 9,700 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, tire size: 245/70 r17,5, color: orange, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem three-way tipper with ramp shaft, Typ. HTK 135024 Basic Discontinued model - SALE PRICE !!! INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES incl. lockable ramp cover with lid (privacy screen) TOP! As an option, we offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. * Simple & quick handling * No loose parts as with pin locks (risk of loss) * No need to drill holes in the rear carrier / floor panel Wteiznbn Features: * Permissible total weight 13,000 kg * Payload approx. 9,700 kg * Loading area approx. 5,030 x 2,420 mm * Loading height unloaded approx. 990 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,500 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides through complete hot-dip galvanizing * Laser-welded quality steel drop sides, 500 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Side wall lifting springs on the side walls * Solid front wall made of galvanized steel * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 950 mm * DIN screw-type drawbar eye Ø 40 mm * Reinforced 12 t geared support winch with load and fast gear * 10 pieces 3 tons lashing rings countersunk * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 245/70 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t or 10 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm * Plastic toolbox mounted under the loading area ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 7,500 kg, maximum load weight: 5,600 kg, axe configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, total width: 2,200 mm, total height: 1,400 mm, * Humbaur HTK 754020 * Three-way tipper Do03Sz * New vehicle * Tandem chassis * Year of construction: 2024 * Total weight: 7500kg * Unladen weight: 1900kg * Payload: 5600kg * Overall dimensions: 6040mm x 2200mm x 1400mm * Interior dimensions: 4000mm x 2030mm x 400mm * Loading height: 920mm * Steel drop sides can be folded down and removed at the sides and rear * Swinging rear dropside with central locking system * Height-adjustable drawbar approx. 590mm - 930mm * Torsion spring units and parabolic suspension * Integrated mounting shaft for drive-on ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4 mm sheet steel * 3 pairs of recessed lashing points * Compressed air brake with ALB / ABV ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 1,900 kg, maximum load weight: 14,500 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels Cp0Uerdhjh * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 7,500 kg, maximum load weight: 5,250 kg, axe configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, Year of construction: 2022, Condition: new, total width: 2,200 mm, total height: 1,450 mm, Equipment: ABS, On offer is a Humbaur HTK 754020 three-way tipper Premium Overall dimensions: approx. 6,070mm x 2,200mm x 1,450mm Rs70Yze00D Internal dimensions: 4,000mm x 2,030mm x 400mm 2 aluminum drive-on ramps with storage compartments Permissible total weight: 7,500 kg Payload: approx. 5,250 kg Wheelbase 9900mm Tires: 215/75/R17.5 inch Loading height approx. 920mm Drawbar length: approx. 1,900mm Coupling height: approx. 560 - 900mm 4 lashing points in the corners, 3,500 kg each 6 lashing points in longitudinal direction, 1,000 kg each ABS brake system Coupling heads red/yellow Towing eye 40mm LED rear lights Fold-down and removable steel drop sides 400mm Hinged, removable and swinging tailgate Removable bulkhead Hydraulic three-sided tipping mechanism Lift limiter and safety cable Hydraulic plug-in coupling SVK BG3 single-circuit connection Rigid side collision protection Mudguards on both axles with splash guard 2 wheel chocks Contact person: Erik Martin e- Errors and prior sale reserved

Overall weight: 3,500 kg, empty load weight: 972 kg, maximum load weight: 2,315 kg, axe configuration: 2 axles, loading space volume: 3.4 m³, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,460 mm, working width: 2,280 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3500.41 Perm. total weight: 3500 kg Weight: 3500 kg Payload: 2315 kg Empty weight: 1185 kg Box dimensions: 4100 x 2100 x 350 mm Tires: 13 inch Loading height: 760 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45, side 45 with 350 mm aluminium dropside attachment - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made from one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, completely removable - rear flap can be swivelled - 8 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. guarantee, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome plated tipping cylinder, hand pump, from 3000 kg perm. total weight electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 8 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Bjafmzf3Rb

Overall weight: 10,500 kg, maximum load weight: 7,500 kg, axe configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,475 mm, Equipment: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of construction 2024 * Total weight: 10,500 kg * Payload: 7500 kg * Unladen weight: 3000 kg * Overall dimensions: 6960 x 2550 x 1475 * Bridge dimensions: 5035 x 2420 x 500 * Steel drop sides: 500 mm high E2Mo2Pa * Infinitely height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electric and compressed air connections on the drawbar * Storage shaft with 2 aluminum drive-on ramps in the chassis frame * 8to loading ramps surcharge 1499,-¤ ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 21,000 kg, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, axe configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air/air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized Cnbodj2Wyv * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 21,000 kg, maximum load weight: 16,200 kg, axe configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle Cp0T8I0Res * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 14,400 kg, maximum load weight: 10,900 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, tire size: 285/70 r19,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 14.4 to tandem three-way tipper with ramp shaft and automatic tailgate release, Typ. HTK 145024 Basic --- --- INCLUDING AUTOMATIC TAILGATE RELEASE INCLUDING THROUGH-LOADING VERSION INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES incl. lockable ramp shaft with cover (privacy screen) --- --- TOP! As an option, we can offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. * Simple & quick handling * No loose parts as with pin locks (risk of loss) * No need to drill holes in the rear carrier / floor panel --- --- Equipment: * Permissible total weight 14,400 kg * Payload approx. 10,900 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,050 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,580 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides through complete hot-dip galvanizing * Laser-welded quality steel drop sides, 500 mm high * Side and rear drop sides can be folded down, removable and bolted to swing with central locking system * Rear wall with automatic rear dropside release * Galvanized and bolted rear stanchions * Dropside lifting springs on the side drop sides * Solid front wall made of galvanized steel, can be folded forward (through-loading system) * Drawbar with horizontal spindle infinitely height-adjustable for coupling heights of approx. 760 - 1,050 mm * DIN screw-type towing eye Ø 40 mm * Reinforced 12 t gear support winch with load and fast gear * 10 pieces 3 tons lashing rings countersunk * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * EBS braking system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * Tires 285/70 R19.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing in an immersion bath * Through-loading system with fold-down front wall * Rear wall with automatic unlocking when tipping backwards * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload 2Vowey Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65 kg/each) * Plastic toolbox mounted under the loading area ∗Storage vehicle - promptly available

Overall weight: 18,000 kg, maximum load weight: 13,800 kg, axe configuration: 2 axles, loading space length: 5,040 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,710 mm, Equipment: tail-lift, * Humbaur HTK 185024 * Tandem three-way tipper * New vehicle * Air suspension * Total weight: 18000kg * Unladen weight: 4200kg * Payload: 13800kg * Overall dimensions: 6950mm x 2550mm x 1710mm * Interior dimensions: 5040mm x 2420mm x 600mm * Coupling drawbar eye * Axles with drum brakes * Maintenance-free parabolic suspension for optimum load compensation * Air brake with release valve * Compressed air coupling heads (red/yellow) * Automatic anti-lock brake (ABV) * EBS brake system * Quality steel drop sides, can be folded down at the sides and rear, removable and swingable * 2 rear supports * Central locking * Removable bulkhead * Lashing points in bridge floor * Reinforced 12-tonne geared support winch with load and fast gear * Galvanized central tube infinitely adjustable via crank handle * Extra-wide single tires for low ground pressure * LED side marker lights * Motorized hydraulic three-sided tipping gear * Tires: 435/50 R19.5 * Screed chute * Side wall spring * Optional accessories possible * Price varies depending on equipment * We would be happy to put together an individual offer for you ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! Dpdw32 TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 21,000 kg, maximum load weight: 16,400 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle R7Brt INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 2,700 kg, empty load weight: 643 kg, maximum load weight: 2,025 kg, axe configuration: 2 axles, loading space volume: 1.6 m³, loading space length: 2,670 mm, loading space width: 1,500 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,260 mm, working width: 1,680 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 2700.27 Perm. total weight: 2700 kg Weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Box dimensions: 2670 x 1500 x 350 mm Tires: 13 inch Loading height: 725 mm Loading area hydraulically tiltable with hand pump Tipping angle rear 45 degrees, side 50 degrees - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made of one piece - 4-stage hard chrome-plated tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing light - Side walls made of powder-coated, galvanized sheet steel, cpl. 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - screed shaft as preparation for aluminum screeds for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, galvanized sheet steel, braked, incl. guarantee, V-drawbar hot-dip galvanized, chassis and tipper body hot-dip galvanized, tipper body made of steel, made from one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg perm. total weight electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, powder-coated drop sides, completely removable, rear flap can be swung, 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting T8G3Drw

Overall weight: 18,000 kg, maximum load weight: 13,600 kg, axe configuration: 2 axles, loading space volume: 7 m³, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2022, Condition: new, total width: 2,550 mm, total height: 1,140 mm, Equipment: ABS, WhatsAp HUMBAUR HTK 185024 Three-way tipper Premium NEW VEHICLE w.EZ Equipment: Technical data: Internal dimensions: approx. 5,030 mm x 2,420 mm x 600 mm Overall dimensions: approx. 7,000 mm x 2,550 mm x 1,750 mm Permissible total weight: 18,000 kg Payload: approx. 13,600 kg Wheelbase: 1310 mm Tires: 435/50 R19.5 inch Loading height: approx. 1,140 mm Drawbar length: approx. 1800 mm Coupling height: approx. 840-1100 mm Rear tipping angle: approx. 48° Lateral tipping angle: approx. 45° 5 pairs of lashing rings, 3000 kg per lashing point Lashing rings recessed in the bridge floor SAF axles Air suspension with shock absorbers, electronically controlled for tilt stabilization, Lifting and lowering function Wide tires 435/50 R19.5" Brake system EBS brake system with stability program in accordance with ECE directive Spring-loaded parking brake 2 interchangeable red/yellow front clutch heads ISO 1728 or DUOMATIC Dknersvb EBS plug-in connection ISO 7638 Note: Towing vehicle must be equipped with an ABS socket Towing device: Galvanized drawbar, DIN screw-type drawbar eye Ø 50 mm, infinitely adjustable crank winch Electrical system 24 volt lighting system with multi-chamber rear lights and LED side marker lights 15-pin connector plug for lighting Frame Solid, welded chassis frame, hot-dip galvanized Lockable storage shaft with plastic rollers for 2 optional drive-on ramps integrated in the frame integrated in the frame Bridge Bridge floor made of 4 mm fine-grained steel Reinforced bridge frame with V-shaped beams, hot-dip galvanized, (due to hot-dip galvanizing, an optical wave formation is possible) 4 ball tilting bearings with 2 non-interchangeable tilting bearing pins Laser-welded quality steel drop sides 600 mm high Drop sides can be folded down at the side and rear, removable and swinging with central locking Removable galvanized rear stanchions Dropside lifting springs on the side drop sides Solid steel bulkhead, removable Drop sides and bulkhead hot-dip galvanized Support Reinforced 12 t geared support winch with load and fast gear 2 telescopic folding supports on the left and right at the rear of the vehicle Hydraulics Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar) Five-stage hard chrome-plated cylinder with lift limiter and safety cables SVK BG3 hydraulic plug-in coupling as single-circuit connection Mudguards on front and rear axle with splash guard system 2 wheel chocks with holder Contour marking white on the sides, red at the rear Approval: COC paper NEW VEHICLE Europe-wide transportation possible ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF Czech,Polski: MARIAN WhatsApp: Wir sprechen,folgende Sprachen/we speak: German, Czech,Polski, Romania, Russia, English

Overall weight: 18,000 kg, maximum load weight: 13,400 kg, axe configuration: 2 axles, loading space length: 5,530 mm, loading space width: 2,420 mm, loading space height: 1,135 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,750 mm, Equipment: ABS, Humbaur HTK 185524 * Heavy duty trailer * Tandem three-way tipper ??NEW VEHICLE? * Year of construction 2024 Bbyvujvqhnp * Air suspension * Total weight: 18000kg * Unladen weight: 4600kg * Payload: 13400kg * Overall dimensions: 7500 x 2550 x 1750 * Interior dimensions: 5530 x 2420 x 1135 * Coupling drawbar eye * Axles with drum brakes * Maintenance-free parabolic suspension for optimum load equalization * Air brake with release valve * Compressed air coupling heads (red/yellow) * Automatic anti-lock brake (ABV) * EBS brake system * Quality steel drop sides, can be folded down at the sides and rear, removable and swingable * 2 rear supports * Central locking * Removable bulkhead * Lashing points in bridge floor * Reinforced 12-tonne geared support winch with load and fast gear * Galvanized central tube infinitely adjustable via crank handle * Extra-wide single tires for low ground pressure * LED side marker lights * Motorized hydraulic three-way tipping mechanism * Tipping angle (side/rear) 45 °/48 ° * Tires: 435/50 R19.5 * Screed shaft * Side wall spring Optional accessories possible! ??price varies depending on equipment!?? ???We would be happy to put together an individual offer for you!?? ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 9.00 to 17.00, Saturday 9.00 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 13,000 kg, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, axe configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved Cp0Ub2Iuu8 ∗Price ex works

Overall weight: 3,000 kg, empty load weight: 907 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, color: other, Condition: new, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear 42, side 50 with leaf grid attachment/steel grid attachment 600 mm high, 4-sided swinging - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made from one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, completely removable - rear flap can be swivelled - 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting D07Onq

Overall weight: 3,500 kg, maximum load weight: 2,490 kg, axe configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, total width: 1,910 mm, total height: 1,260 mm, * Humbaur HTK 3500.31 * Three-way tipper * New vehicle * Year of construction: 2024 * Total weight: 3500kg * Payload: 2550kg * Overall dimensions: 4500mm x 1900mm x 1260mm * Interior dimensions: 3140mm x 1750mm x 350mm * E-pump combined with emergency hand pump * Fuhrmann profile side walls made of galvanized sheet steel, completely removable * V-drawbar hot-dip galvanized * Steel tipper body, made from one piece * Chassis, tipper body and drop sides hot-dip galvanized * Humbaur multifunctional lighting * 13-pin plug and reversing light * Swinging rear flap * Tie-down rings mounted in the bridge floor, tensile force 800 kg per tie-down ring * Screed shaft as preparation for aluminum screeds for easy retrofitting * Support wheel incl 19% VAT ATTENTION !!!!! MUST READ!!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Ubjkxqbuwf Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 11,900 kg, maximum load weight: 9,210 kg, axe configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, loading space height: 450 mm, tire size: 235/75 R17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem three-way tipper, Typ. HTK 105024 DL --- --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDING HOT-DIP GALVANIZED TIPPER BODY & DROP SIDES --- --- TOP! As an option, we can offer you ALU docking ramps with our PATENTED LOCKING SYSTEM with a safety claw under the ramps. The locking mechanism is operated from the side, the claw engages in the standard rear carrier at the bottom, thus securing the ramp quickly and easily. * Simple & quick handling * No loose parts as with pin locks (risk of loss) * No need to drill holes in the rear carrier / floor panel --- --- Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,210 kg * Loading area approx. 5,070 x 2,420 mm * Loading height unloaded approx. 950 mm * Overall dimensions: LxWxH approx. 7,020 x 2,550 x 1,420 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides through complete hot-dip galvanizing * Laser-welded quality steel drop sides, 450 mm high * Side and rear drop sides can be folded down, removable and bolted to swing with central locking system * Galvanized and bolted rear stanchions * Side wall lifting springs on the side walls * Solid front wall made of galvanized steel * Drawbar with friction-locked height adjustment for coupling heights of approx. 660 - 890 mm * DIN screw drawbar eye Ø 40 mm * Reinforced 12 t gear support winch with load and fast gear * 8 pieces 3 tons lashing rings countersunk F37Eerb * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanizing * Rear wall with automatic unlocking when tipping backwards * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Ideal load securing options thanks to standard lashing options * The friction-locked height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) * Plastic toolbox mounted under the loading area * Lockable ramp shaft with cover (privacy screen) ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 3,000 kg, empty load weight: 907 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, first registration: 08/2023, next inspection (TÜV): 08/2025, color: other, Condition: used, construction height: 1,260 mm, working width: 1,930 mm, Equipment: second-hand vehicle warranty, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Payload: 2130 kg Empty weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area with hand pump and electric pump hydraulically tiltable Tipping angle rear 42, side 50 with leaf grid attachment / steel grid attachment 600 mm high, 4-sided oscillating Due to business closure, the trailer was bought back. It is in mint condition and has only been used approx. 3 times. - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made of one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg permissible total weight electric pump with hand pump - 13-pin plug and reversing light - Side walls made of aluminium 350 mm high, cpl. 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, V-drawbar hot-dip galvanized, tipper body made of steel, made from one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg perm. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Cnqcjppfvs

Overall weight: 3,500 kg, maximum load weight: 2,485 kg, axe configuration: 2 axles, loading space length: 3,630 mm, loading space width: 1,855 mm, loading space height: 350 mm, first registration: 02/2022, Year of construction: 2022, Condition: used, total width: 2,023 mm, total height: 1,251 mm, * Humbaur HTK 3500.37 * Three-way tipper * Tipper * Tandem high loader * Year of construction: 2022 * EZ: 22.02.2022 * HU: 09/2026 Hbax7X7Q * Total weight: 3500kg * Unladen weight: 1015kg * Payload: 2485kg * Overall dimensions: 5088mm x 2023mm x 1251mm * Interior dimensions: 3630mm x 1855mm x 350mm * Aluminum top 620mm * Rear supports * Removable steel drop sides * Swinging rear flap * Chassis and tipper body hot-dip galvanized * Steel tipper body * Electric pump combined with emergency hand pump * 8 tie-down rings mounted in the bridge floor * Tractive force 800 kg per tie ring * Pre-assembled plank shaft * Automatic support wheel * V-drawbar ATTENTION !!!!! MUST READ !!!!! The internal dimensions given are approximate. The seller is not liable for errors, input errors and data transmission errors. Subject to alterations and prior sale! Details are non-binding descriptions and do not represent guaranteed properties. This advertisement is only a preview of our vehicle and is not part of a purchase contract! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 11,900 kg, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, axe configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-over with ramp shaft, Typ. HBT 106224 BE (planks can be pushed in) INCLUDING side walls made of aluminium, anodized INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,400 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,140 x 2,550 x 1,400 mm * Aluminium drop sides, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Lockable mounting shaft for optional aluminum ramps in the chassis frame * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * BPW axles * 6 pcs. 6 t lashing rings countersunk Cp0Ua8Vdy2 * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Lockable pick-up shaft * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 2,500 kg, maximum load weight: 1,570 kg, axe configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 2,000 mm, Year of construction: 2024, Condition: new, total width: 2,318 mm, total height: 2,640 mm, * Humbaur HK 254018-20P * Tandem box trailer * Car trailer * Box trailer * New vehicle * Total weight: 2500kg * Unladen weight: 930 kg * Payload: 1570 kg * Overall dimensions: 5434mm x 2316mm x 2640mm * Interior dimensions: 4070 x 1810 x 2000 * Rear double doors * Stainless steel espagnolette lock and hinges * Door opening dimensions: 1685 x 1960 mm * 13-pin plug and reversing light * 18 mm thick floor panel * Side walls made of 18 mm thick plywood with GRP coating * 18 mm thick roof with GRP coating * Interior lighting * Stainless steel espagnolette lock and hinges * Automatic support wheel * V-drawbar Humbaur box trailers can be customized according to your wishes, with a wide range of accessories and equipment options available. The individual models are available in various weight classes and sizes, also with a Sandwich PurFerro body. We would be happy to provide you with an individual, non-binding offer. ATTENTION !!!!! BE SURE TO READ !!!!! Cl22Dlc7Yc We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 11,900 kg, maximum load weight: 9,500 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: Cp0Uj3Ymrz * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works