Lowbed

Humbaur HBTZ 196524 BS abgeschrägt

Overall weight: 13,600 kg, Empty load weight: 3,600 kg, Maximum load weight: 10,000 kg, Axe configuration: 2 axles, Loading space length: 6,250 mm, Loading space width: 2,450 mm, Loading space height: 400 mm, Suspension: steel, Tire size: 235/75 r17,5 zoll, Wheelbase: 990 mm, Year of construction: 2024, Condition: new, Equipment: Abs, HUMBAUR construction machinery transporter tandem overloader LOADING AREA SLOPING AT THE REAR HBT 116224BS / Hot-dip galvanized / Aluminium drop sides Hot-dip galvanized chassis frame Anodized aluminium drop sides Equipment: -Tandem low loader (construction machinery material transporter) -Sloping loading area at the rear -Permissible total weight 11,900 kg -Payload approx. 9,010 kg -Loading area approx. 6200 x 2460 mm -bridge floor made of approx. 40 mm softwood planks -Aluminium drop sides 400 mm high, anodized -Reinforced 25 t geared support winch with load and fast gear -Fixed drawbar -Coupling height approx. 750 - 1000 mm -3 pairs of recessed 3 t lashing rings (3000 daN) -6 pairs of recessed 1 t lashing points (1000 daN) in the outer frame -2 telescopic folding supports at the rear of the vehicle -ABS 2-circuit air brake system 1-part drive-on ramps, hot-dip galvanized, approx. 2400 mm long and approx. 520 mm wide, with galvanized STEEL GRID COVERING -mudguards -Anti-spray system -Ø 40 mm DIN towing eye -Aluminum side collision protection Drive-on angle only approx. 16° -Loading height unloaded only approx. 920 mm Optionally available for an extra charge: B3Jvjtzh3I -Plastic tool box under the loading area -Additional price: 290,- Euro plus VAT => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 21,000 kg, Maximum load weight: 16,400 kg, Axe configuration: 2 axles, Loading space length: 7,200 mm, Loading space width: 2,540 mm, Suspension: full air, Tire size: 235/75 r17,5, Condition: new, Equipment: Abs, Trailer Coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle R7Brt * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 19,000 kg, Maximum load weight: 14,440 kg, Axe configuration: 2 axles, Loading space length: 7,200 mm, Loading space width: 2,460 mm, Loading space height: 400 mm, First registration: 06/2024, Condition: used, Equipment: Abs, HUMBAUR HBTZ 197224 BS-Premium beveled tandem !!!RENT!!! * 19.000 kg tech. GG, 18.000 kg ZGG * German vehicle * Mint condition * Payload 14,440 kg * Towing eye 50 mm * Wheelbase 1,400 mm * Aluminum drop sides 400 mm * Loading height approx. 870 mm * Drawbar length approx. 1,800 mm * Coupling height cca 750 - 1,050 mm * Drive-on angle cca 13° * SAF axles * Air suspension * Raise and lower air control * Drum brakes * Sloping rear * Telescopic folding supports at the rear Gmsx0Oqkx * Gear support winch 12 tons load and fast gear * Ramp length 3,100 mm * Ramp width 760 mm * Air connections with red and yellow coupling head * Galvanized drawbar continuously adjustable in height * 15-pin power connection * ABS connection * Loading area L/W/H/ 7,200 mm, 2,450 mm, 400 mm * Front wall galvanized steel pluggable 400 mm * Softwood floor 40 mm * 4 pairs of lashing rings 8,000 daN per lashing ring * 8 pairs of lashing rings 1,000 daN per lashing ring * Ramp lifter 1 spring mechanism per ramp * Ramp safety device with turnbuckle Subject to prior sale and errors excepted! Sale exclusively according to our AGB`s Important note ? Important information: Despite careful checking of all details in our offer, it can happen that errors creep in. Some of these are caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent guaranteed properties.

Overall weight: 11,900 kg, Axe configuration: 2 axles, Loading space volume: 6 m³, Loading space length: 6,200 mm, Loading space width: 2,450 mm, Loading space height: 400 mm, Condition: new, Total width: 2,550 mm, Total height: 3,260 mm, Equipment: Abs, Humbaur HBT 106224 BS Basic sloping---- * Technical data: * Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm * Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm * Permissible total weight: 11,900 kg * Payload: approx. 9,100 kg * Wheelbase: 990 mm * Tires: 235/75 R17.5 inch * Loading height: approx. 920 mm * Drawbar length: approx. 1800 mm * Coupling height: approx. 750-1000 mm * Drive-on angle: approx. 16° * Screed length: approx. 2600 mm * Plank width: approx. 540 mm * 3 pairs of lashing rings, 3000 kg per lashing point * Lashing rings recessed in the bridge floor * 7 pairs of lashing rings, 1000 kg per lashing point * Lashing rings in the outer frame---- * Standard equipment: Fhc9Zwxc * Axles * Axles from renowned manufacturers * Suspension * Low-maintenance parabolic suspension with load compensation * Tires * Tires of the manufacturer's choice on steel rims * Brake system * ABS braking system in accordance with ECE directive with ALB function * ABS plug-in connection ISO 7638 * Spindle parking brake * 2 interchangeable coupling heads red/yellow ISO 1728 * Drawbar * Drawbar with DIN screw drawbar eye Ø 40mm, galvanized, infinitely adjustable via crank handle * Electrical system * 24V lighting system with multi-chamber rear lights and LED side marker lights * 15-pin connector plug for lighting * Frame * Solid, welded and hot-dip galvanized frame * Sloping rear area, 12° incline * Floor * Floor covering made from 40 mm softwood planks * Side walls * Side walls made of anodized aluminium * Can be folded down at the sides and removed * Galvanized corner stanchions, pluggable at the front and rear * Ramps * 2 folding steel ramps, 1-piece, galvanized, can be moved sideways * 1 gas pressure spring per ramp * Ramp safety catch on rear stanchion * Ramp decking made of galvanized grating * Support * Reinforced 12 t gear support winch with load and fast gear * 2 telescopic folding supports on the left and right at the rear of the vehicle * Equipment * Steel mudguards with anti-spray mats * Side collision protection up to the 1st axle, foldable * 2 wheel chocks with holder * Contour markings on the sides and rear * Space for two-line license plate on the left-hand ramp We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Overall weight: 21,000 kg, Empty load weight: 4,800 kg, Maximum load weight: 16,200 kg, Loading space length: 6,540 mm, Loading space width: 2,540 mm, Loading space height: 870 mm, Suspension: air, Tire size: 235/75 r 17,5, Year of construction: 2024, Condition: new, Equipment: Abs, Air suspension with lifting and lowering function SAF low-loader axles Twin tires 235/75 R 17.5 EBS electronic braking system 6 10 t lashing rings recessed in the floor 14 2 t lashing rings in the outer frame Geared support winch with load and fast gear Rear support : 2 folding supports on the chassis frame Drive-on ramps approx. 3100 mm long and approx. 750 mm wide laterally movable Bridge floor with wooden decking and steel tear plate above the wheels Wooden decking in the access ramps Spring ramp jacks Cjxr8E0G23 Aluminum drop sides with central stanchions Hot-dip galvanized steel end wall Infinitely height-adjustable drawbar Coupling height approx. 800 - 1000 mm Din towing eye d= 50 mm Loading area slanted at the rear Mudguards with anti-spray system Extras available on request at any time Collection ex works or delivery Price per KM 2,90 Euro

Overall weight: 21,000 kg, Empty load weight: 4,600 kg, Maximum load weight: 166,400 kg, Axe configuration: 2 axles, Loading space length: 6,500 mm, Loading space width: 2,540 mm, Loading space height: 3,710 mm, Suspension: air/air, Tire size: 235/75 r17,5, Condition: new, Equipment: Abs, Trailer Coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- Cnbodj2Wyv --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 13,600 kg, Empty load weight: 3,900 kg, Maximum load weight: 9,700 kg, Axe configuration: 2 axles, Loading space length: 7,280 mm, Loading space width: 2,450 mm, Suspension: air, Tire size: 205/65 r17,5, Wheelbase: 1,270 mm, Year of construction: 2023, Condition: new, Equipment: Abs, Trailer Coupling, HBTZ 197224 BS Tandem beveled 400 mm aluminum drop sides Rear loading area beveled Loading height 870 mm Axles from renowned manufacturers Air-sprung ABS Height-adjustable drawbar One-piece spring ramps Cqelmhhm 3 pairs of 10 to lashing points 8 pairs of 2 to lashing points Completely galvanized Tires 205/65 R 17.5

Overall weight: 21,000 kg, Maximum load weight: 16,200 kg, Axe configuration: 2 axles, Loading space length: 7,250 mm, Loading space width: 2,540 mm, Suspension: full air, Tire size: 235/75 r17,5, Condition: new, Equipment: Abs, Trailer Coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead Cp0T8I0Res * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 21,000 kg, Empty load weight: 5,010 kg, Maximum load weight: 15,990 kg, Axe configuration: 2 axles, Loading space length: 7,200 mm, Loading space width: 2,550 mm, First registration: 09/2019, Suspension: air-lift, Tire size: 235 / 75 R 17,5, Color: other, Condition: used, Gearing type: other, Front tire size: 235 / 75 R 17,5, Rear tire size: 235 / 75 R 17,5, Driver cabin: other, Emission class: none, Fuel: biodiesel, Equipment: Abs, Compressed Air Brake, Chassis: hot-dip galvanized, 20 x lashing eyes, 10 x stake pockets, loading height: 900 mm, , Vehicle is sold on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Beiyt2A

Overall weight: 11,900 kg, Empty load weight: 2,500 kg, Maximum load weight: 9,400 kg, Axe configuration: 2 axles, Loading space length: 5,000 mm, Loading space width: 2,010 mm, Loading space height: 250 mm, Suspension: steel, Tire size: 235/75 r17,5 zoll, Wheelbase: 990 mm, Year of construction: 2024, Condition: new, Equipment: Abs, Construction machinery tandem low-loader HS 115020BS FIRE-CONDITIONED Equipment: -Permissible total weight 11,900 kg -Payload approx. 9,410 kg -Loading area approx. 5000 x 2010 mm Drive-on ramps with grating, hot-dip galvanized -Fixed drawbar -Reinforced 25 t geared support winch with load and fast gear (no support wheel!) -2 pairs of recessed 6 t lashing rings (in the corners) Curhcyl -5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) -2 folding supports at the rear of the vehicle -ABS brake system -steel mudguards, hot-dip galvanized -bridge floor made of wooden decking -Chassis frame incl. body hot-dip galvanized => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 13,000 kg, Empty load weight: 2,800 kg, Maximum load weight: 10,200 kg, Axe configuration: 2 axles, Loading space length: 6,200 mm, Loading space width: 2,460 mm, Loading space height: 3,260 mm, Tire size: 245/70 r17,5, Condition: new, Equipment: Abs, Tail-Lift, Trailer Coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Cp0Ub2Iuu8 ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 11,900 kg, Maximum load weight: 8,575 kg, Axe configuration: 2 axles, Loading space length: 6,000 mm, Loading space width: 2,000 mm, First registration: 05/2020, Condition: used, Equipment: Abs, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! Interior dimensions: 600 cm long Gpdjuk 201 com wide Ramps 250 cm long Milling machine transport Rinsing drilling rig transport or also other GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to make you a LEASING-MIET BUY or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Overall weight: 11,900 kg, Loading space volume: 2 m³, Loading space length: 5,000 mm, Loading space width: 2,010 mm, Loading space height: 250 mm, Condition: new, Total width: 2,550 mm, Total height: 3,200 mm, Equipment: Abs, Humbaur HS 105020 BS Tandem low loader Basic---- * Technical data: * Internal dimensions: approx. 5,000 mm x 2,010 mm x 250 mm * Overall dimensions: approx. 7,160 mm x 2,550 mm x 3,200 mm * Permissible total weight: 11,900 kg * Payload: approx. 9,450 kg * Wheelbase: 990 mm * Tires: 235/75 R 17.5 inch * Loading height: approx. 700 mm * Drawbar length: approx. 1,800 mm * Coupling height: approx. 700-950 mm * Drive-on angle: approx. 15° * Screed length: approx. 2,600 mm * Plank width: approx. 540 mm * 2 pairs of lashing rings, 3,000 kg per lashing point * Lashing rings recessed in the bridge floor * 6 pairs of lashing rings, 1,000 kg per lashing point Buwussaaog * Lashing rings in the outer frame---- * Standard equipment: * Axles * Axles from renowned manufacturers * Suspension * Maintenance-free parabolic suspension with load compensation * Tires * Tires of the manufacturer's choice on steel rims * Brake system * ABS braking system in accordance with ECE directive with ALB function * ABS plug-in connection ISO 7638 * Spindle parking brake * 2 interchangeable coupling heads red/yellow ISO 1728 * Drawbar * Drawbar with DIN screw drawbar eye Ø 40 mm, galvanized, infinitely adjustable via crank handle * Electrical system * 24 volt lighting system with multi-chamber rear lights and LED side marker lights * 15-pin connector plug for lighting * Frame * Solid, welded chassis frame, hot-dip galvanized * Low design, loading area straight between the wheels * Fixed, hot-dip galvanized front and side walls * Plug-in corner stanchions at the rear * Floor * 40 mm softwood floor covering * Support * Reinforced 12 t geared support winch with load and fast gear * 2x outriggers on the frame, foldable and telescopic * Ramps * 2 folding steel ramps, galvanized, laterally movable * Ramp decking made of galvanized grating * Ramp lifter 1 gas pressure spring per ramp * Ramp safety device on rear stanchion * Equipment * Galvanized steel mudguards with anti-spray mats, * Rigidly attached side collision protection, from the start of the bridge to the 1st axle * Contour marking on the sides and rear * 2 wheel chocks with holder * Space for two-line license plate We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Overall weight: 13,600 kg, Maximum load weight: 9,900 kg, Axe configuration: 2 axles, Loading space length: 6,280 mm, Loading space width: 2,450 mm, Loading space height: 400 mm, Year of construction: 2024, Condition: new, Total width: 2,550 mm, Total height: 3,000 mm, Equipment: Abs, Humbaur HBTZ 136224 * Tandem low loader * Twin tires * New * Aluminum drop sides * Spare wheel * Year of construction 2024 * Perm. total weight: 13600 kg * Unladen weight approx. 3700 kg * Payload: 9900 kg * Drawbar load: 1000 kg * Overall dimensions: 8350 mm x 2550 mm x 3000 mm * Internal bridge dimensions: 6280 mm x 2450 mm * Dropside height: approx. 400 mm * Loading height unloaded: 850 mm * Drawbar length: approx. 1800 mm * Coupling height: approx. 600 - 800 mm * Length and width of ramp: approx. 2400 mm x 520 mm * Approx. 15° ramp angle * 24 V lighting system * 15-pin connector plug for lighting * 3 pairs of lashing points 6 t recessed in the bridge floor * 7 pairs of lashing points 2 t outer frame * Reinforced 12 t geared support winch with load and fast gear * Telescopic folding supports left and right * 2 folding steel ramps, can be moved sideways * 1 gas pressure spring per ramp Nqarnbu2T7 * Ramp safety device on rear stanchion * Steel mudguards * Folding side collision protection * 2 wheel chocks with holder ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired!!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. For new vehicles, additional costs for vehicle documents and freight may be incurred. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger Schnee GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 21,000 kg, Empty load weight: 5,010 kg, Maximum load weight: 15,990 kg, Axe configuration: 2 axles, Loading space length: 7,200 mm, Loading space width: 2,550 mm, First registration: 09/2019, Suspension: air-lift, Tire size: 235 / 75 R 17,5, Color: other, Condition: used, Gearing type: other, Front tire size: 235 / 75 R 17,5, Rear tire size: 235 / 75 R 17,5, Driver cabin: other, Emission class: none, Fuel: biodiesel, Equipment: Abs, Compressed Air Brake, Chassis: hot-dip galvanized, 20 x lashing eyes, 10 x stake pockets, loading height: 900 mm, , Vehicle is sold on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ukxqvasps2

Overall weight: 6,500 kg, Maximum load weight: 4,900 kg, Axe configuration: 2 axles, Loading space length: 4,000 mm, Loading space width: 2,000 mm, Loading space height: 330 mm, Year of construction: 2022, Condition: new, Total width: 2,540 mm, Total height: 630 mm, Equipment: Abs, Tail-Lift, WhatsApp HUMBAUR HS 654020 BS Tandem low loader Technical data: Internal dimensions: approx. 4,000 mm x 2,000 mm x 330 mm Overall dimensions: approx. 6,070 mm x 2,540 mm x 2,850 mm Permissible total weight: 6,500 kg Payload: approx. 4,900 kg Wheelbase: 850 mm Tires: 215/75 R17.5 inch Loading height: approx. 630 mm Drawbar length: approx. 1800 mm Coupling height: approx. 700-850 mm Drive-on angle: approx. 15° Screed length: approx. 2250 mm Plank width: approx. 400 mm 2 pairs of lashing rings, 3000 kg per lashing point Lashing rings recessed in the bridge floor 5 pairs of lashing rings, 1000 kg per lashing point Lashing rings in the outer frame Axles from renowned manufacturers Suspension Torsion spring units from well-known manufacturers Tires Tires of the manufacturer's choice Brake system ABS braking system in accordance with ECE directive with ALB function ABS plug-in connection ISO 7638 Spindle parking brake 2 interchangeable coupling heads red/yellow ISO 1728 Towing device Drawbar with DIN screw drawbar eye Ø 40mm, galvanized, infinitely adjustable via crank handle Electrical system 24V lighting system with multi-chamber rear lights and LED side marker lights 15-pin connector plug for lighting Frame Solid, welded chassis frame, hot-dip galvanized Low design, loading area straight between the wheels Fixed, hot-dip galvanized front and side walls Corner stanchions can be plugged in at the rear Floor Floor covering made of 40 mm softwood flooring Support Heavy-duty automatic support wheel 2x support on the frame, foldable and telescopic Ramps 2 foldable aluminum ramps, laterally movable Ramp safety device on rear stanchion Steel mudguards with anti-spray mats Rigid side collision protection, from the start of the bridge to the 1st axle Contour markings at the side and rear 2 wheel chocks with holder TÜV individual approval/data confirmation NEW VEHICLE Europe-wide transportation possible ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF Czech,Polski: MARIAN Cfhg22Ma32 WhatsApp: Wir sprechen,folgende Sprachen/we speak: German, Czech,Polski, Romania, Russia, English,

Overall weight: 11,900 kg, Maximum load weight: 9,500 kg, Axe configuration: 2 axles, Loading space length: 5,000 mm, Loading space width: 2,010 mm, Loading space height: 250 mm, Tire size: 235/75 r17,5, Condition: new, Equipment: Abs, Trailer Coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. Cp0Uj3Ymrz ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 11,900 kg, Empty load weight: 2,550 kg, Maximum load weight: 9,350 kg, Operation weight: 1,000 kg, Axe configuration: 2 axles, Loading space length: 5,000 mm, Loading space width: 2,010 mm, Loading space height: 350 mm, Tire size: 235/75 R17,5, Ground clearance: 700 mm, Color: orange, Year of construction: 2023, Condition: new, Functionality: fully functional, Machine/vehicle number: 1136622, Equipment: Tail-Lift, Trailer Coupling, Double axle truck trailer for transporting machinery Humbaur brand Model HS 105020 BS RAL orange 2011 Trailer with soft wooden slatted floor, treated for strength and durability Outer wheels, with lowered floor - loading angle approximately 16° Pair of 540 mm gridded rear loading ramps, adjustable in width and can be fixed to the flatbed With galvanized 40 mm diameter eyelet 15-pin plug With toolbox mounted on the front External dimensions 7150x2550x3250 mm Internal dimensions 5000x2010x350 mm Docking height 765 - 965 mm R8Wtvu9Ghx Height of loading platform 700 mm Equipped with: - 2 pairs of load retaining rings recessed in the cargo bed, traction force 3000 kg each - 6 pairs of load securing rings recessed in the outer frame, traction force 1000 kg each - Pair of telescopic supports fixed on the frame, foldable In prompt delivery Viale Italia, 171 Conegliano (TV) - Berton

Overall weight: 6,500 kg, Axe configuration: 2 axles, Loading space length: 4,000 mm, Loading space width: 2,000 mm, Loading space height: 330 mm, Condition: new, Total width: 2,540 mm, Total height: 2,850 mm, Equipment: Abs, Humbaur HS 654020 BS Tandem low loader ---- * Internal dimensions: approx. 4,000 mm x 2,000 mm x 330 mm * Overall dimensions: approx. 6,060 mm x 2,540 mm x 2,850 mm * Permissible total weight: 6,500 kg * Payload: approx. 4,900 kg * Wheelbase: 850 mm * Tires: 215/75 R17.5 inch * Loading height: approx. 630 mm * Drawbar length: approx. 1,800 mm * Coupling height: approx. 700-850 mm * Drive-on angle: approx. 15° * Screed length: approx. 2,250 mm * Plank width: approx. 400 mm * 2 pairs of lashing rings, 3,000 kg per lashing point * Lashing rings recessed in the bridge floor * 5 pairs of lashing rings, 1,000 kg per lashing point * Lashing rings in the outer frame---- * Standard equipment: * Axles * from renowned manufacturers * Suspension * Torsion spring units from well-known manufacturers * Tires Fydday2Vx * Tires of the manufacturer's choice * Brake system * ABS braking system according to ECE directive with ALB function * ABS plug-in connection ISO 7638 * Spindle parking brake * 2 interchangeable red/yellow clutch heads to ISO 1728 * Pulling device * Drawbar with DIN screw drawbar eye Ø40 mm, galvanized, infinitely adjustable via crank handle * Electrical system * 24V lighting system with multi-chamber rear lights and LED side marker lights * 15-pin connector plug for lighting * Frame * Solid, welded chassis frame, hot-dip galvanized * Low design, loading area straight between the wheels * Fixed, hot-dip galvanized front and side walls * Corner stanchions can be inserted at the rear * Floor * 40 mm softwood floor covering * Support: heavy-duty automatic support wheel * 2x support on the frame, foldable and telescopic * Ramps * 2 foldable aluminum ramps, laterally movable * Ramp safety device on rear stanchion * Equipment * Steel mudguards with anti-spray mats * Rigid side collision protection, from the start of the bridge to the 1st axle * Contour markings white at the sides and red at the rear * 2 wheel chocks with holder * Space for single-line license plate We can make you a leasing or financing offer on request. Mr. Seidel (Tel. will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes and prior sale reserved !!!

Overall weight: 21,000 kg, Maximum load weight: 16,200 kg, Axe configuration: 2 axles, Loading space length: 7,250 mm, Loading space width: 2,540 mm, Loading space height: 870 mm, Year of construction: 2024, Condition: new, Total width: 2,550 mm, Total height: 3,710 mm, Equipment: Abs, Humbaur HBTZ 217224 BS * New vehicle * Tandem low loader * Galvanized * Air suspension * Lift axle * Construction machinery transporter * Year of construction 2024 Bkmepmllro * Total weight: 21000kg * Unladen weight: 4800kg * Payload: 16200kg * Overall dimensions: 9400mm x 2550mm x 3710mm * Interior dimensions: 7250mm x 2540mm * Loading height: 870mm * Tires: 12-ply 235/75 R17.5 * Drive-on angle 13 degrees * Galvanized drawbar * Twin tires as standard * 15-pin connector plug * Reinforced lashing points * 12 t gear support winch * Galvanized steel ramps * EBS brake system with stability program * 24 V lighting system (multi-chamber rear lights) * Solid, welded and hot-dip galvanized frame * Softwood floor covering * Steel mudguards * 2 wheel chocks * Tool box Optional accessories available on request! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND ADDITIONAL PAYMENT POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 !!! always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger Schnee GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Year of construction: 2023, Condition: used, Humbaur tandem low loader with standard equipment Technical data: Interior dimensions: approx. 5,000 mm x 2,010 mm x 250 mm Overall dimensions: approx. 7,160 mm x 2,550 mm x 3,200 mm Permissible total weight: 10,500 kg Payload: approx. 8,050 kg Wheelbase: 990 mm Tires: 235/75 R 17.5 inch Loading height: approx. 700 mm Drawbar length: approx. 1800 mm Coupling height: approx. 700-950 mm Drive-on angle: approx. 15° Bn7X3C2X3Y8 Screed length: approx. 2600 mm Plank width: approx. 540 mm 2 pairs of lashing rings, 3000 kg per lashing point Lashing rings recessed in the bridge floor 6 pairs of lashing rings, 1000 kg per lashing point Lashing rings in the outer frame Standard equipment: Axles Axles from renowned manufacturers; Suspension: Maintenance-free parabolic suspension with load compensation; Tires: Tires of the manufacturer's choice on steel rims; Brake system: ABS brake system according to ECE directive, with ALB function; ABS plug-in connection ISO 7638; Spindle parking brake; 2 interchangeable clutch heads red/yellow ISO 1728; Towing device: Drawbar with DIN screw drawbar eye Ø 40 mm, galvanized, infinitely adjustable via crank; Electrical system: 24 volt lighting system with multi-chamber rear lights and LED side marker lights; 15-pin connector plug for lighting; Frame: Solid, welded chassis frame chassis frame, hot-dip galvanized; Low design, loading area straight between the wheels; Fixed, hot-dip galvanized front and side walls; Corner stanchions can be plugged in at the rear; Floor: Floor covering made of 40 mm softwood flooring; Support: Reinforced 12 t geared support winch with load and fast gear; 2 x outriggers on the frame, foldable and telescopic; Ramp decking made of galvanized grating; Ramp lifter 1 gas pressure spring per ramp; Ramp safety device on rear stanchion; Equipment Galvanized steel mudguards with anti-spray mats; Side collision protection rigidly attached, from the start of the bridge to the 1st axle; Contour markings at the sides and rear; 2 wheel chocks with holder; Space for two-line license plate;

Overall weight: 11,900 kg, Empty load weight: 2,550 kg, Maximum load weight: 9,350 kg, Operation weight: 1,000 kg, Axe configuration: 2 axles, Loading space length: 5,000 mm, Loading space width: 2,010 mm, Loading space height: 350 mm, Tire size: 235/75 R17,5, Ground clearance: 700 mm, Color: orange, Year of construction: 2023, Condition: new, Functionality: fully functional, Machine/vehicle number: 1157628, Equipment: Tail-Lift, Trailer Coupling, Double-axle truck trailer for transporting machinery Humbaur brand Model HS 105020 BS RAL orange 2011 Trailer with soft wooden slatted floor, treated for strength and durability Exterior wheels, with lowered floor - loading angle approximately 16° Pair of 540 mm gridded rear loading ramps, adjustable in width and can be fixed to the flatbed With galvanized 40 mm diameter eyelet 15-pin plug External dimensions 7150x2550x3250 mm Internal dimensions 5000x2010x350 mm Docking height 765 - 965 mm Height of loading platform 700 mm Equipped with: - 2 pairs of load retaining rings recessed in the cargo bed, traction force 3000 kg each - 6 pairs of load securing rings recessed in the outer frame, traction force 1000 kg each R8Wnfbievr - Pair of telescopic supports fixed on the frame, foldable - With gas lift pistons In prompt delivery Viale Italia, 171 Conegliano (TV) - Berton

Overall weight: 6,500 kg, Maximum load weight: 4,900 kg, Axe configuration: 2 axles, Loading space length: 6,200 mm, Loading space width: 2,540 mm, Loading space height: 2,860 mm, Year of construction: 2024, Condition: new, Total width: 2,540 mm, Total height: 2,860 mm, Equipment: Abs, Humbaur HS 654020 BS * Tree slope transporter * NEW 2024 * Construction machinery tandem low loader bolted * HOT-DIP GALVANIZED * Permissible total weight: 6500 kg * Unladen weight: 1600 * Payload: approx. 4900 kg * Loading area: approx. 4000 x 2000 mm * External dimensions: approx. 6200 mm x 2540 mm x 2860 mm * Drive-on ramps with expanded metal decking, hot-dip galvanized * 15° drive-on angle * Infinitely height-adjustable drawbar * Automatic support wheel * 2 wheel chocks * 2 pairs of 3 t lashing rings (in the corners) * 5 pairs of recessed lashing brackets in the outer frame * 2 support legs on the ramps * 2-circuit compressed air ABS brake system * Sheet steel mudguards * Holder for the electrical and compressed air connections on the drawbar * Bridge floor made of softwood planks * Chassis frame incl. superstructure hot-dip galvanized * 215/75 R17.5 tires * Infinitely height-adjustable drawbar (different coupling heights) * Low loading and construction height * Safe loading and unloading * Non-slip profiled grid ramp covering * Low tare weight and therefore high payload Iexlscm9S ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 over 500 trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 6,500 kg, Maximum load weight: 4,850 kg, Axe configuration: 2 axles, Loading space length: 4,500 mm, Loading space width: 2,000 mm, Loading space height: 630 mm, Year of construction: 2024, Condition: new, Total width: 2,540 mm, Total height: 2,860 mm, Equipment: Abs, Humbaur HS 654520 BS * Heavy-duty trailer * Tandem low loader * Construction machinery transporter ??NEW VEHICLE? * Year of construction 2024 * HOT-DIP GALVANIZED Gnnkv0 * Permissible total weight: 6500 kg * Unladen weight: 1650 kg * Payload: 4850kg * Internal dimensions: 4500mm x 2000mm x 630mm * Overall dimensions: 6700mm x 2540mm x 2860mm * 15° drive-on angle * Infinitely height-adjustable drawbar * Automatic support wheel * 2 wheel chocks * 2 pairs of 3t lashing rings (in the corners) * 5 pairs of recessed lashing brackets in the outer frame * 2 support legs on the ramps * 2-circuit air ABS brake system * Sheet steel mudguards * Holder for the electrical and compressed air connections on the drawbar * Bridge floor made of softwood planks * Chassis frame incl. body hot-dip galvanized * 215/75 R17.5 tires * Infinitely height-adjustable drawbar (different coupling heights) * Low loading and construction height * Safe loading and unloading * Non-slip profiled grid ramp covering * Low tare weight and therefore high payload Optional accessories possible! ??price varies depending on equipment!?? ???We would be happy to put together an individual offer for you!?? ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 9.00 to 17.00, Saturday 9.00 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax:

Overall weight: 11,900 kg, Maximum load weight: 8,560 kg, Axe configuration: 2 axles, Loading space length: 6,000 mm, Loading space width: 2,010 mm, Loading space height: 705 mm, Year of construction: 2024, Condition: new, Total width: 2,550 mm, Total height: 3,300 mm, Equipment: Abs, Humbaur HS 106020 BS tiller transporter Construction machinery transporter * New vehicle * Construction machinery transport trailer * Transport trailer * Milling machine transport * NEW * Year of construction 2024 * Total weight 11900kg * Payload 8560 kg * Unladen weight:3340kg * Overall dimensions: 8420 mm x 2550 mm x 3300 mm * Interior dimensions 6000 mm x 2010 mm x 705 mm * Tires: 235/75 R17.5 Bceqr0P200 * Welded side wall/frame construction made of sheet steel * Bolted V-drawbar, hot-dip galvanized * 15-pin plug and reversing light * Hot-dip galvanized upright steel ramps, * Each ramp with anti-slip grating and integrated support feet * Lashing rings mounted in the outer frame 8 pieces (4 pairs), tensile force 1000 kg per lashing ring * Reinforced 12 to. Gear support winch with load and fast gear, left in direction of travel * Spindle parking brake * Steel floor * Support for tiller neck * LED lighting * 950 mm grid ramps * Leaf springs * Height-adjustable drawbar ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The data given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 9.00 to 17.00, Saturday 9.00 to 14.00 always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Phone: Fax: