Lowbed construction machinery

Humbaur 5-ACHS-TIEFLADER HTD 50 V49 Basic Plus

Overall weight: 30,000 kg, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: full air, tire size: 235/75 r17,5 zoll, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps P2Qp9 Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 40,000 kg, empty load weight: 8,650 kg, maximum load weight: 31,350 kg, axe configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_2022 Technical data: Internal dimensions: approx. 9,220 mm x 2,540 mm x 0 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Gross vehicle weight: 24,000 kg Payload: approx. 15,350 kg Tires: 235/75R17.5 inch Loading height: approx. 900 mm Drawbar length: approx. 1500 mm Coupling height: approx. 820-1000 mm Drive-on angle: approx. 10° Screed length: approx. 3150 mm Screed width: approx. 750 mm Permissible total weight of special equipment: 40,000 kg Payload special gen.: approx. 31,350 kg Drop deck length: approx. 6,610 mm Overall dimensions (LxWxH): 11200 Total weight (technical): approx. 44,000 kg Technical axle load: approx. 11,000 kg 4 pairs of lashing points, 10,000 kg per lashing point Lashing rings in drop deck, recessed 3 pairs of lashing points, 10,000 kg per lashing point 4 pairs of lashing points, 2,000 kg per lashing point Via wheel cut-out 3rd and 4th axle Cotho3P Lashing points in drop deck outer frame Standard equipment: Axles Low loader axles from renowned manufacturers Tires Tires of the manufacturer's choice Suspension Air suspension unit including lifting and lowering acting on rear axle unit Brake system Brake system in accordance with EC directives with EBS 4S/3M in multi-voltage version (12-24V), Spring-applied parking brake incl. 2 test connections pulled outwards for brake/modulator and bellows pressure Electrical system LED lighting with flashing function for side marker lights, Multi-voltage (12-24V) Bogie Solid welded construction with low-maintenance ball bearing slewing ring Draw gear Cranked drawbar with drawbar eye Ø 50 mm low-maintenance silent bushes including height adjustment for drawbar Frame Solid welded construction made of high-strength fine-grained steel Stretched cross members for maximum stability Wheel recesses at the front (top length approx. 2500 mm - depth approx. 410 mm) and rear (top length approx. 1470 mm) rear (top length approx. 1470 mm - depth approx. 370 mm); without wheel recess cover; Excavator trough (length 1650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with 2010 wheelbase, front corners chamfered, Climbing rails at the rear on the drive-on slope for maximum safety during loading and unloading Floor 50 mm softwood flooring (painted/impregnated) Ramps One-piece hot-dip galvanized drive-on ramps (3150mm x 750mm) with 50 mm softwood decking (painted/impregnated), laterally adjustable direct-acting vertical spring lifters for easy operation Optimum securing with turnbuckle and counter stop Finishing Hot-dip galvanized chassis frame Support 2 folding supports at the rear left and right at the rear of the vehicle Equipment Folding side collision protection, front semi-circular mudguards made of plastic - rear straight steel mudguards with anti-spray, 2 wheel chocks with holder; contour marking in accordance with ECE Directive R48 => UVM. => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. 0911/830504 DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 30,000 kg, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS Bgcad8Wlcf => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 40,000 kg, empty load weight: 8,700 kg, maximum load weight: 31,300 kg, axe configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: full air, tire size: 235/75 r17,5 zoll, Year of construction: 2023, Condition: used, Equipment: ABS, center pivot plate, 4-AXLE LOW-LOADER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOW-LOADER AXLES => LASHING RING PACKAGE => flat outer frame for additional accessories => CLIMBING RAILS IN THE REAR AREA OF THE DRIVE-UP SLOPE => 6 LASHING POINTS IN THE EXCAVATOR TROUGH IN THE REAR AREA => LONG 1-PART DRIVE-ON RAMPS => FLAT DRIVE-ON ANGLE Perm. total weight 40,000 kg B8O3Udsnjv Payload approx. 31,350 kg Chassis frame hot-dip galvanized in an immersion bath Bogie frame hot-dip galvanized in an immersion bath Drive-on ramps hot-dip galvanized in an immersion bath Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 16-ply Drop deck length approx. 7160 mm Trough for excavator stick support, approx. 3000 mm x 730 mm x 180 mm in the rear low bed area 4 pairs of lashing rings 10 to. sunk into the drop deck 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. in the outer frame of the low bed 3 pairs of lashing eyes 6 to. on the outer frame 4 pairs of stanchion pockets in the outer frame High bed 4 pairs of stanchion pockets in the low bed outer frame 3-meter widening package with folding boom without slope 4 x warning signs with lighting Rotating beacon at the rear LARGE STEEL STORAGE BOX under the cargo bed 2 storage compartments with hinged lid in the high platform Hydraulic ramp jacks 1-section ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with exceptional approval according to §70 => Freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 10,000 kg, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, axe configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, first registration: 08/2011, suspension: steel, tire size: 235 / 75 R 17,5, color: other, Condition: used, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Dqlr0B

Overall weight: 10,500 kg, maximum load weight: 7,500 kg, axe configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,475 mm, Equipment: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of construction 2024 * Total weight: 10,500 kg * Payload: 7500 kg * Unladen weight: 3000 kg * Overall dimensions: 6960 x 2550 x 1475 * Bridge dimensions: 5035 x 2420 x 500 * Steel drop sides: 500 mm high * Infinitely height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electric and compressed air connections on the drawbar * Storage shaft with 2 aluminum drive-on ramps in the chassis frame * 8to loading ramps surcharge 1499,-¤ ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. E2Mo2Pa TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 40,000 kg, maximum load weight: 31,300 kg, axe configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, Gross vehicle weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized in an immersion bath Bogie frame hot-dip galvanized in an immersion bath Drive-on ramps hot-dip galvanized in an immersion bath Air suspension with manual rear HECK lowering SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 16-ply Drop deck length approx. 7160 mm Trough for excavator stick support, approx. 3000 mm x 730 mm x 180 mm in the rear low bed area 4 pairs of lashing rings 10 to. sunk into the drop deck 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. in the low bed outer frame 3 pairs of lashing eyes 6 to. on the outer frame 4 pairs of stanchion pockets in the outer frame High bed 4 pairs of stanchion pockets in the low bed outer frame 3-meter widening package with folding boom without slope 4 x warning signs with lighting Rotating beacon at the rear Storage compartment under the cargo bed Cp0Uhg7Z7Q 2 storage compartments with hinged lid in the high platform Hydraulic ramp jacks 1-section ramps approx. 3150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVW only with exceptional approval according to §70 ∗Storage vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 24,000 kg, axe configuration: 3 axles, first registration: 02/2008, Condition: used, Humbaur low loader 3 axle - Pre-fitting for widening Dppijz - Unladen weight 6,920 kg - Tüv and SP expired - SAF axles - Tires : 285 / 75 R 17,5 - Drum brakes Subject to errors and prior sale . Internal vehicle number : 9898

Overall weight: 2,500 kg, empty load weight: 1,040 kg, maximum load weight: 1,600 kg, axe configuration: 2 axles, loading space volume: 10.3 m³, loading space length: 3,185 mm, loading space width: 1,730 mm, loading space height: 1,885 mm, color: white, Condition: new, construction height: 2,600 mm, working width: 2,275 mm, Manufacturer: Humbaur Type: Box trailer low loader HGK 35 32 18 - 21 PF60 Deluxe Perm. weight: 2500 kg Weight: 2500 kg Payload: 1600 kg Unladen weight: 900 kg Box dimensions: 3185 x 1730 x 1885 mm Tires: 14 inch Loading height: 600 mm - V-drawbar hot-dip galvanized - 13-pin plug and reversing light, interior light - Side walls made of PurFerro sandwich panels 30 mm thick, top layers of steel, painted white - Lockable double-wing rear door - Stainless steel hinges - Govi or other manufacturer's refrigeration unit - 4 telescopic crank supports swivel - Fully automatic jockey wheel Price includes Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, box, fully automatic jockey wheel, marker lights, hot-dip galvanized V-drawbar, braked, incl. warranty, 13-pin plug and Guarantee, 13-pin plug and reversing light, Interior light, Side walls made of PurFerro sandwich panels 30 mm thick, Top layers of steel, painted white, Lockable double-wing rear door, Stainless steel hinges, Govi cooling unit or other manufacturer, 4 swivel telescopic crank supports Easjcnd

Overall weight: 10,000 kg, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, axe configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, first registration: 08/2011, suspension: steel, tire size: 235 / 75 R 17,5, color: other, Condition: used, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Ukxpxg37Cr

Overall weight: 40,000 kg, maximum load weight: 31,180 kg, axe configuration: > 3 axles, loading space length: 9,710 mm, loading space width: 2,542 mm, first registration: 01/2019, Condition: used, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Low loader can be widened to: 3,000 mm, galvanized, folding widenings, hydr. drive-on ramps laterally movable (LxW) 3000x750 mm, hydr. rear support, steel wooden plank floor, cranked drawbar fork, drawbar eye 50 mm, loading bed: 6,220 mm, high bed 2175 mm, storage box on high bed, front slope 490 mm, rear slope: 930 mm, loading height: approx. 900 mm, drive-on height: 700 mm, 8 x heavy-duty lashing rings per side, 8 x stanchion pockets per side, excavator trough, (LXB) 3260x800 mm, extendable warning signs, 1 rotating beacon, ABS, EBS, "SAF" axle(s), air suspension with lifting and lowering device, drum brake system, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Cpfzqthpio We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 10,500 kg, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, axe configuration: 2 axles, loading space length: 5,040 mm, loading space width: 2,420 mm, first registration: 02/2022, suspension: steel, tire size: 235/75R17,5 140J, wheelbase: 990 mm, color: other, Condition: used, gearing type: other, front tire size: 235/75R17,5 140J, rear tire size: 235/75R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, surcharge for ramps: 800 ¤ , , Vehicle is sold and offered on commission, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ckqgqvglcg

Overall weight: 1,000 kg, empty load weight: 215 kg, maximum load weight: 785 kg, axe configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,100 mm, loading space height: 500 mm, tire size: 13 zoll, Condition: new, - Price incl. letter and VAT. - Vehicle equipment: raised dropside 500mm, support wheel, 13-pin plug, reversing light, 2 pairs of lashing brackets, rear flap with recessed dropside locks. - Collection in Frankfurt am Main. - With COC papers and EC certificate Subject to prior sale, changes, errors, mistakes and price changes. WESTFALIA-EICHMANN - We LIVE trailers! Your trailer specialist in the Rhine-Main area We look forward to seeing you! This is WESTFALIA-EICHMANN: Trailers, spare parts, bike racks, roof boxes, workshop service and and and... visit us in our sales store or on our homepage We always have over 200 trailers in stock - from unbraked to braked, from single-axle, tandem, box, vehicle transporter to dropside, etc. Even special solutions are no problem for us! Furthermore, with over 80 rental trailers, we have one of the largest fleets in the Rhine-Main area. There is sure to be something for your transportation problem! We have over 80,000 different trailer spare parts and accessories in our well-stocked warehouse. With us, your car and trailer are in the right hands! Coupling assembly, trailer repairs, inspections, TÜV approval, axle repairs, etc. Huonvb9Lw Talk to us! We will be happy to help you!

Overall weight: 30,000 kg, maximum load weight: 23,600 kg, axe configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, * Humbaur HTD 308525 * New vehicle * Low loader * Year of construction 2024 * Total weight:30000kg * Unladen weight:6400kg * Payload:23600kg * Overall dimensions:10780mm x 2540mm x 3780mm * Interior dimensions:6500mm x 2520mm * Loading height:890mm * Tires:12-ply 235/75 R17,5 * Drive-on angle 10 degrees * Parabolic suspension or air suspension * 24V EBS brake system * 24V electrical system * Solid welded construction made of fine-grained steel * 4-fold warning sign * Rotating beacons Isvn7Xm * 3 pairs of 10-ton lashing rings recessed in the low bed * 2 pairs of lashing rings 10 tons sunk into the high bed * 4 pairs of lashing rings 3.0 tons on the outer frame * 4 pairs of lashing rings 2.0to over wheel cut-out * Floor made of 50mm softwood flooring * Chassis frame and bogie hot-dip galvanized in an immersion bath * One-piece hot-dip galvanized drive-on ramps * We would be happy to provide you with an individual offer * Several vehicles in stock * Also available in other sizes and weight classes ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 2,500 kg, empty load weight: 900 kg, maximum load weight: 1,600 kg, axe configuration: 2 axles, loading space length: 3,185 mm, loading space width: 1,730 mm, loading space height: 1,885 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Equipment: cooling unit, Humbaur HK 25 32 18 - 20 PF30 Basic Refrigerated trailer / refrigerated box Car trailer Age: New (year of production: 2024) 2 years main inspection from the date of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: Immediately (in stock)! Financing possible via our partner banks! Technical data Permissible total weight: 2,500kg Unladen weight: approx. 900kg Dpn8Rh Payload: approx. 1,600kg Number of axles: 2 Load compartment length: 3,185mm Load compartment width: 1,730mm Load compartment height: 1,885mm Brake type: Braked, overrun brake Chassis: Low loader (wheels next to body), rubber spring axle Electrics: 12V, 13-pin plug Tire size: 195/65 R15 Special equipment Connection cable for cooling unit Scuff plate 15cm Rear supports Standard equipment Cooling unit White exterior Lockable double folding doors incl. door retainer Handles Rain gutter Lashing rings can be moved flexibly in the frame profile Sandwich structure made of PurFerro 30 mm thick Pressure-sensitive floor panel Automatic support wheel Interior lighting Galvanized chassis Frame bolted and galvanized V-drawbar AL-KO or Knott axle and brake system Accessories (subject to surcharge) 100km/h certificate incl. retrofitting 4x wheel shock absorbers Airline rail Connection cable for cooling unit Rear supports Height-adjustable drawbar Insulated floor plate Inner height of body 208,50cm Long drawbar Omni-Step step Spare wheel incl. spare wheel holder Scuff plate 15cm or 30cm Slotted anchor rail Side door Door contact switch for interior lighting Trailer lock Tensioning strap Vehicle delivery throughout Germany Registration Germany-wide Transfer license plate (valid for 5 days) Please note Weight specifications may vary depending on equipment, errors, prior sale and changes reserved! Condition, drivability: roadworthy, warranty: vehicle warranty from the manufacturer

Overall weight: 19,000 kg, maximum load weight: 14,600 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air/air, tire size: 385/65 r22,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS Cp0Ukzl7N3 --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 1,000 kg, empty load weight: 212 kg, maximum load weight: 788 kg, axe configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,310 mm, loading space height: 685 mm, tire size: 13 zoll, Condition: new, - Price incl. letter and VAT. - Vehicle equipment: with wheel shock absorber for 100 km/h approval, raised dropside 500mm, wooden/aluminum cover, railing on wooden/aluminum cover 2050x1310mm and 2 crossbars for bicycle stand rails, width 1310mm. - Collection in Frankfurt am Main. - With COC papers and EC certificate. Subject to prior sale, changes, errors, mistakes and price changes. WESTFALIA-EICHMANN - We LIVE trailers! Your trailer specialist in the Rhine-Main area We look forward to seeing you! This is WESTFALIA-EICHMANN: Trailers, spare parts, bike racks, roof boxes, workshop service and and and... visit us in our sales store or on our homepage We always have over 200 trailers in stock - from unbraked to braked, from single-axle, tandem, box, vehicle transporter to dropside etc. Even special solutions are no problem for us! Furthermore, with over 80 rental trailers, we have one of the largest fleets in the Rhine-Main area. There is sure to be something for your transportation problem! We have over 80,000 different trailer spare parts and accessories in our well-stocked warehouse. Dvkop8R With us, your car and trailer are in the right hands! Coupling assembly, trailer repairs, inspections, TÜV approval, axle repairs, etc. Talk to us! We will be happy to help you!

Overall weight: 2,000 kg, empty load weight: 773 kg, maximum load weight: 1,227 kg, axe configuration: 2 axles, loading space length: 3,157 mm, loading space width: 1,654 mm, loading space height: 2,300 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur Equitos Alu Plus Black 2000 Horse trailer Car trailer Age: New (year of production: 2024) 2 years main inspection from the day of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: approx. 6 weeks after receipt of order (non-binding) Financing possible via our partner banks! Technical data Permissible total weight: 2,000kg Unladen weight: approx. 773kg Payload: approx. 1,227kg Number of axles: 2 Load compartment length: 3,157mm Load compartment width: 1,654mm Load compartment height: 2,300mm Brake type: Braked, overrun brake Chassis: Low loader (wheels next to body), rubber suspension axles Electrics: 12V, 13-pin plug Tire size: 175/70 R13 Special equipment Without Standard equipment EquiDrive® chassis incl. wheel shock absorbers (100 km/h approval) Aluminum BiComp floor 21mm (no wood - rot-proof) Rubber floor 8mm thick Dpn8Od Side step protection Body made of double-walled, anodized aluminium profiles Lockable tack room with saddle holder, bridle holder, mirror and net Rear support with lighting Access door with 3-point locking system Overrun flap with rubber tread strip Divided and height-adjustable breast and rear bars with panic release EquiLock® lockable partition wall Tinted vent windows in poly hood Poly hood in Black Metallic Interior lighting Hay net ring Wind deflector Automatic support wheel Galvanized frame V-drawbar AL-KO or Knott axles and brake system Accessories (subject to surcharge) Silver / Black aluminum rims Saddle rack for 2 saddles (outside) Swivel saddle rack for 1 saddle (outside) Skylight Foal grille Swivel and pivotable rear door Full-length stall bar for transporting foals Rubber step protection for tack room Side padding left and right Head partition for center partition PVC tarpaulin blind instead of wind deflector Front wear mat Rear wear mat Trailer lock Spare wheel 175/70 R13 incl. spare wheel holder Drive...

Overall weight: 7,500 kg, empty load weight: 2,250 kg, maximum load weight: 5,250 kg, axe configuration: 2 axles, loading space length: 6,070 mm, loading space width: 1,450 mm, loading space height: 2,200 mm, suspension: air/air, tire size: 215/75 r15,7, color: orange, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 7.5 to tandem three-way tipper with ramp shaft, Typ. HTK 754020 Premium --- --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAW TUBE INCLUDING HOT-DIP GALVANIZED TIPPER BODY including lockable ramp cover with lid (privacy screen) Bdqmf8Kt7Rp --- --- Equipment: * Permissible total weight 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body & chassis through complete hot-dip galvanizing * Side walls in RAL color of choice (galvanized for an additional charge) * Laser-welded quality steel drop sides, 400 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Solid front wall made of galvanized steel, plugged and removable * Infinitely height-adjustable drawbar for coupling heights unloaded approx. 560 - 900 mm * DIN screw drawbar eye Ø 40 mm * Heavy-duty automatic support wheel * 2 pieces of 3 to lashing rings recessed in the corners * 3 pairs of 1 to drop lashing brackets recessed in the outer frame * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 215/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally available for an extra charge: * 1 pair of ALU drive-on ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (tare weight approx. 31 kg/each) * Plastic toolbox mounted under the loading area * Galvanized side walls * 24 volt electro-hydraulic system with battery and remote control * Steel attachments etc. ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works - Gersthofen

Overall weight: 2,400 kg, empty load weight: 797 kg, maximum load weight: 1,603 kg, axe configuration: 2 axles, loading space length: 3,157 mm, loading space width: 1,654 mm, loading space height: 2,300 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur Equitos Alu Plus Black 2400 Horse trailer Car trailer Age: New (year of production: 2024) 2 years main inspection from the day of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: Immediately (in stock)! Financing possible via our partner banks! Technical data Permissible total weight: 2,400kg Unladen weight: approx. 797kg Payload: approx. 1,603kg Number of axles: 2 Cnhghyzygi Load compartment length: 3,157mm Load compartment width: 1,654mm Load compartment height: 2,300mm Brake type: Braked, overrun brake Chassis: Low loader (wheels next to body), rubber suspension axles Electrics: 12V, 13-pin plug Tire size: 195/65 R15 Special equipment Without Standard equipment EquiDrive® chassis incl. wheel shock absorbers (100 km/h approval) Aluminum BiComp floor 21mm (no wood - rot-proof) Rubber floor 8mm thick Side step protection Body made of double-walled, anodized aluminium profiles Lockable tack room with saddle holder, bridle holder, mirror and net Rear support with lighting Access door with 3-point locking system Overrun flap with rubber tread strip Divided and height-adjustable breast and rear bars with panic release EquiLock® lockable partition wall Tinted vent windows in poly hood Poly hood in Black Metallic Interior lighting Hay net ring Wind deflector Automatic support wheel Galvanized frame V-drawbar AL-KO or Knott axles and brake system Accessories (subject to surcharge) Silver / Black aluminum rims Saddle rack for 2 saddles (outside) Swivel saddle rack for 1 saddle (outside) Skylight Foal grille Swivel and pivotable rear door Full-length stall bar for transporting foals Rubber step protection for tack room Side padding left and right Head partition for center partition PVC tarpaulin blind instead of wind deflector Front wear mat Rear wear mat Trailer lock Spare wheel 195/65 R15 incl. spare wheel holder Vehicle delivery Germany-wide

Overall weight: 21,000 kg, maximum load weight: 16,400 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; R7Brt * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 1,900 kg, maximum load weight: 14,500 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: full air, tire size: 235/75 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function Cp0Uerdhjh * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 13,000 kg, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, axe configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath Cp0Ub2Iuu8 * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 30,000 kg, maximum load weight: 23,500 kg, axe configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Chjktjvw Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 30,000 kg, maximum load weight: 24,000 kg, axe configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 Chamqa3Y --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works