Lowbed

Humbaur Humbaur 3-Achs Auflieger LIA&NLA/verzinkt/3mPaket/Hydr.

Overall weight: 48,000 kg, maximum load weight: 37,460 kg, axe configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, HUMBAUR 3-axle wheel well low loader semi-trailer with offset loading area, Typ. HTS30K- wheel recesses --- INCLUDING lift axle & self-steering axle with SAF air suspension D0Z9Mm INCLUSIVE rubber coverings on ramp and rear slope INCLUSIVE ALU drop sides and tool box on the high platform INCLUSIVE 3-meter package INCLUSIVE excavator trough INCLUSIVE large hydraulic package (hydr. ramp lift, hydr. side shift & hydr. rear support) Equipment: V41 * Permissible total weight 48,000 kg * Payload approx. 37,460 kg * Chassis frame and ramps hot-dip galvanized * Visible surface finish in RAL * SAF air suspension unit including lifting and lowering * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * Excavator stick support approx. 3,000 mm long * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Length of drop deck approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * 2" kingpin can be offset by 340 mm for 2+3 axle SZM * Wheel recess depth 390 mm at the front and 320 mm at the rear for various wheelbases * Wheel recess extension parts with hardwood covers * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Spare wheel holder for bulkhead incl. e-wheel * 3 pairs of lashing rings 6 tons sunk into the high bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 5 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the outer frame low bed * 3 pairs of lashing eyes 6 to. in the excavator stick support * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted as a storage compartment for wooden planks on the side under the cargo bed * Warning package with lighting * Rotating beacon at the rear * 2x LED reversing lights at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Rubber covering on ALU panels on ramp and ramp slope * Softwood flooring on low loading & semi-trailer platform * Hydraulic ramp lifters * Hydraulic side shift * Hydraulic rear support * COC papers * 40,000 kg GVW only with special permit according to §70 * 1 pair of ALU ramps to the high plateau * 1 pair of galvanized load guide rails * Gallows suspension for supply lines * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 * ECE plate at the rear ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 30,000 kg, maximum load weight: 23,500 kg, axe configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized Chjktjvw * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Overall weight: 40,000 kg, maximum load weight: 31,300 kg, axe configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, Gross vehicle weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized in an immersion bath Bogie frame hot-dip galvanized in an immersion bath Drive-on ramps hot-dip galvanized in an immersion bath Air suspension with manual rear HECK lowering SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 16-ply Drop deck length approx. 7160 mm Trough for excavator stick support, approx. 3000 mm x 730 mm x 180 mm in the rear low bed area 4 pairs of lashing rings 10 to. sunk into the drop deck 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. in the low bed outer frame 3 pairs of lashing eyes 6 to. on the outer frame 4 pairs of stanchion pockets in the outer frame High bed 4 pairs of stanchion pockets in the low bed outer frame 3-meter widening package with folding boom without slope 4 x warning signs with lighting Cp0Uhg7Z7Q Rotating beacon at the rear Storage compartment under the cargo bed 2 storage compartments with hinged lid in the high platform Hydraulic ramp jacks 1-section ramps approx. 3150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVW only with exceptional approval according to §70 ∗Storage vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 16,000 kg, empty load weight: 4,710 kg, maximum load weight: 11,290 kg, axe configuration: 2 axles, loading space length: 5,530 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, suspension: steel, tire size: 435/50R19, Condition: new, Equipment: ABS, truck registration, | Humbaur tandem 3-sided tipper | height-adjustable drawbar with crank 840-1100 mm | frame galvanized, | hydraulic connections | dimensions loading area: L: 5.53m W: 2.55m height: 1.75m | rear support | leaf spring-loaded, | floor made of 4mm fine-grained steel, | 6 pairs of lashing rings each 3000kg lashing point, | SAF axle with drum brake | total weight: 18.000 kg, payload: 7.780kg | drawbar eye 50mm | tires: 435/50R19 | operating voltage 24V | errors excepted, subject to change and prior sale. Mx0Lvg

Overall weight: 30,000 kg, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: full air, tire size: 235/75 r17,5 zoll, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg P2Qp9 Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 30,000 kg, maximum load weight: 24,000 kg, axe configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Condition: new, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon Chamqa3Y --- Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 18,000 kg, empty load weight: 4,160 kg, maximum load weight: 13,840 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, first registration: 06/2024, suspension: air, tire size: 385/65R22,5, Condition: used, Equipment: truck registration, | Gravel 3-sided tipper | rigid drawbar | frame hot-dip galvanized, | hydraulic connections | dimensions loading area: L: 5.0m W: 2.42m height: 0.80m | side walls made of Hardox 800x2.5mm, oscillating | air suspension, | floor made of 4mm highly wear-resistant steel HB450, | body KTL and powder-coated, RAL9006 white aluminum | 6 pairs of lashing rings per 3000kg lashing point, | SAF axle with drum brake | total weight: 18.000 kg, payload: 13720kg | drawbar eye 50mm | tires: 385/65R22,5 | operating voltage 24V | errors excepted, subject to change and prior sale. Si83D

Overall weight: 30,000 kg, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, axe configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2024, Condition: new, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. Bgcad8Wlcf => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Overall weight: 18,000 kg, empty load weight: 4,280 kg, maximum load weight: 13,720 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22,5, Condition: new, Equipment: ABS, truck registration, | Gravel 3-sided tipper | rigid drawbar, roller tarpaulin | frame hot-dip galvanized, | hydraulic connections | dimensions loading area: L: 5.0m W: 2.42m height: 0.80m | side walls made of Hardox 800x2.5mm, oscillating | air suspension, | floor made of 4mm highly wear-resistant steel HB450, | body KTL and powder-coated, RAL9006 white aluminum | 6 pairs of lashing rings per 3000kg lashing point, | SAF axle with drum brake | total weight: 18.000 kg, payload: 13720kg | drawbar eye 50mm | tires: 385/65R22,5 | operating voltage 24V | errors excepted, subject to change and prior sale. Clymttag

Overall weight: 11,900 kg, empty load weight: 3,120 kg, maximum load weight: 7,780 kg, axe configuration: 2 axles, loading space length: 5,070 mm, loading space width: 2,420 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75 R17,5, Condition: new, Equipment: truck registration, | Humbaur tandem 3-sided tipper | height-adjustable drawbar with crank 660-900 mm | frame galvanized, | hydraulic connections | dimensions loading area: L: 5.03m W: 2.42m height: 0.50m | rear support | leaf spring-loaded, | floor made of 4mm fine-grained steel, | 5 pairs of lashing rings each 3000kg lashing point, | SMB axle with drum brake | total weight: 11.900 kg, payload Austria: 7,780kg | tires: 235/75R17.5 | operating voltage 24V | errors excepted, subject to change and prior sale. Cdeqltorwu

Overall weight: 40,000 kg, maximum load weight: 31,180 kg, axe configuration: > 3 axles, loading space length: 9,710 mm, loading space width: 2,542 mm, first registration: 01/2019, Condition: used, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Low loader can be widened to: 3,000 mm, galvanized, folding widenings, hydr. drive-on ramps laterally movable (LxW) 3000x750 mm, hydr. rear support, steel wooden plank floor, cranked drawbar fork, drawbar eye 50 mm, loading bed: 6,220 mm, high bed 2175 mm, storage box on high bed, front slope 490 mm, rear slope: 930 mm, loading height: approx. 900 mm, drive-on height: 700 mm, 8 x heavy-duty lashing rings per side, 8 x stanchion pockets per side, excavator trough, (LXB) 3260x800 mm, extendable warning signs, 1 rotating beacon, ABS, EBS, "SAF" axle(s), air suspension with lifting and lowering device, drum brake system, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Cpfzqthpio We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 1,000 kg, axe configuration: 1 axle, maximum load weight: 789 kg, empty load weight: 211 kg, tire size: 13 zoll, loading space width: 1,365 mm, loading space length: 2,095 mm, loading space height: 70 mm, Condition: new, - Price incl. letter and VAT. - Vehicle equipment: 13-pin plug, 10 lashing eyes for load securing, 3 stand rails with bracket mounted, 1 loading ramp integrated in the plank shaft. - Collection in Frankfurt am Main. Ider238Vg - With COC papers and EC certificate Subject to prior sale, changes, errors, mistakes and price changes. WESTFALIA-EICHMANN - We LIVE trailers! Your trailer specialist in the Rhine-Main area We look forward to seeing you! This is WESTFALIA-EICHMANN: Trailers, spare parts, bike racks, roof boxes, workshop service and and and... visit us in our sales store or on our homepage We always have over 200 trailers in stock - from unbraked to braked, from single-axle, tandem, box, vehicle transporter to dropside etc. Even special solutions are no problem for us! Furthermore, with over 80 rental trailers, we have one of the largest fleets in the Rhine-Main area. There is sure to be something for your transportation problem! We have over 80,000 different trailer spare parts and accessories in our well-stocked warehouse. With us, your car and trailer are in the right hands! Coupling assembly, trailer repairs, inspections, TÜV approval, axle repairs, etc. Talk to us! We will be happy to help you!

Overall weight: 3,500 kg, maximum load weight: 2,600 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Condition: new, Humbaur three-way tipper HTK 3500.31 electrically tiltable permissible total weight: 3,500kg Internal box dimensions: 314x175x35cm (LxWxH) Equipment: * electrically tiltable with emergency hand pump * Rear swinging tailgate * Integrated ramp shafts * Chassis and tipper body welded and hot-dip galvanized Dqmjhx * 2mm galvanized steel floor * 6 lashing eyes embedded in the loading area (800 kg per eye) * Aluminum drop sides 350 mm foldable and removable all round * Automatic support wheel * Lighting protected in the underride guard * 3-stage telescopic cylinder * 195/50 R13C tires * Braked with automatic reverse drive * 13-pin plug with reversing light * Maintenance-free rubber spring axles with independent suspension Accessories subject to surcharge: * 100 km/h conversion for 250,- Euro incl. VAT * Grid attachment (60 cm) for 1,299 euros incl. VAT * Aluminum attachment walls for 949,- Euro incl. VAT * Set of crankable rear supports for 250 euros incl. VAT * Aluminum ramps (2,800 kg load capacity/pair) for 795 euros incl. VAT * High tarpaulin and bows on request Sales, advice and collection in Zell by appointment. Please note that due to the current shortage of materials at the suppliers, the offer prices for trailers, accessories and construction components may currently vary due to material surcharges. Subject to prior sale and errors excepted. Please ask for availability and final prices. Constantly large selection of new car trailers of the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Can also be ordered online. We are happy to provide you with our transfer license plate for 20 euros for home transport. Delivery within Germany possible for an extra charge!

Overall weight: 750 kg, maximum load weight: 630 kg, axe configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,095 mm, Year of construction: 2024, Condition: new, Humbaur Steely Series 1000 NEW 2024 2nd choice 1-axle box trailer Total weight: 750kg Unladen weight: 120 kg Payload: 630 kg Overall dimensions: 2960mm x 1545mm x 805mm Interior dimensions: 2050mm x 1095mm x 300mm Loading height: 495mm 13 inch tires 100 km/h Hot-dip galvanized V-drawbar with cross brace Tension locks on the tailgate Four tie-down rings fixed to the side walls Optional: - Tarpaulin bows -Side wall attachment -flat tarpaulin -support wheel -Net TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Ckdlz00Iim Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Overall weight: 48,000 kg, maximum load weight: 36,870 kg, axe configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, loading space height: 870 mm, Year of construction: 2023, Condition: new, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, WhatsApp HUMBAUR low-loader semi-trailer 3-axle HTS GermanNEW vehicle with absolutely full equipment: Frame: Solid welded construction made of high-strength fine-grained steel Stretched cross members for maximum stability Chassis frame hot-dip galvanized 2? kingpin can be offset by 340 mm for 2+3-axle SZM Floor with 50 mm hardwood covering Wheel cut-outs above the rear wheels Steel mudguards with anti-spray system Climbing rails at the rear on the ramp ?maximum safety during loading and unloading 3x10t SAF low-loader axles with closed S-cam brakes Air suspension unit including lifting and lowering WABCO SmartBoard Spring-loaded parking brake WABCO EBS brake system in accordance with EC directives Lashing rings 6 t recessed in the high bed 3 pairs of lashing rings 3 t in the raised bed outer frame E2Kape2Wv 5 pairs of lashing rings 10 t recessed in the low bed 6 pairs of lashing points 3 t in the low bed outer frame One-piece hot-dip galvanized access ramps with solid rubber coating Can be moved sideways hydraulically Hydraulic direct-acting lifting cylinders Secured by turnbuckle and counter stop Folding side collision protection 2 wheel chocks with holder 15-pin socket LED multi-chamber lights in 24 V, shock-resistant and dampened, protected in the underride guard Retroreflective contour markings in accordance with ECE Directive R 48 white at the sides, red at the rear Spare wheel + spare wheel holder at the front on the bulkhead EG+Duomatic coupling Lift and self-steering axle Removable rotating beacon Working lights Additional reversing lights Wheel recesses front and rear Aluminum drive-on ramps to the raised bed Trough for excavator stick storage Overwidth warning package with warning signs Electrical system and rotating beacon Load securing rails for tracked vehicles Additional lashing eyes in the low bed in the high bed and in the outer frame Rubber coating on ramps and loading area Various stake pockets Frame with preparation for container locking Storage boxes front and center 3 m widening Hydraulic ramp jacks, support legs and side shift Aluminum drop sides for high bed Aluminum storage compartment on high bed SK height 1250-1300 mm K height CONDITION ABSOLUTELY NEW VEHICLE without initial registration Condition according to age + mileage VERY GOOD! "EC Declaration of Conformity COC" or "EC Individual Approval" EUROPE-WIDE TRANSPORT AND DELIVERY POSSIBLE All information without guarantee! ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polski, Romania, Russia, English, All information without guarantee!

Overall weight: 19,000 kg, maximum load weight: 14,950 kg, axe configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, first registration: 11/2024, Condition: used, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, * SAF axles * air-sprung * Drum brakes * Three side tipper * Chassis galvanized * Hardox steel body, KTL coated Dpo7Xl * Swivel drop sides with central locking * Left side wall can be folded down with spring support * Automatic rear wall release * 12 to support winch * 14,950 kg payload Price from Bernkastel-Kues

Overall weight: 3,500 kg, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, axe configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 400 mm, Year of construction: 2024, Condition: new, mileage: 50 km, gearing type: mechanical, energy efficiency: A, Humbaur HTK 3500.31 Three-way tipper Car trailer Age: New (year of production: 2024) 2 years general inspection from the date of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: approx. 6 weeks after receipt of order (non-binding) Financing possible via our partner banks! Technical data Permissible total weight: 3,500kg Unladen weight: approx. 1,010kg Payload: approx. 2,490kg Number of axles: 2 Load compartment length: 3,130mm Load compartment width: 1,740mm Load compartment height: 400mm Brake type: Braked, overrun brake Chassis: High loader (wheels under body), rubber suspension axles Electrics: 12V, 13-pin plug Tire size: 195/50 R13 Features Tipping function via hydraulic pump (electric / electric pump) Emergency hydraulic pump (mechanical / hand pump) Ramp shafts Steel floor plate Fuhrmann profile drop sides made of galvanized sheet steel Drop sides foldable and removable Rear dropside as flap or swing flap Automatic support wheel Lashing eyes Welded and galvanized frame V-drawbar AL-KO or Knott axles and brake system Accessories (subject to surcharge) 100km/h certificate incl. retrofitting 4x wheel shock absorbers Aluminum ramps Silver / Black aluminum rims Parking supports Trailer net Trailer lock Bluetooth receiver for electric pump H-frame Height-adjustable drawbar Wheel set 185 R14C Spare wheel 195/50 R13 incl. holder Tractor connection for hydraulic pump Tensioning strap Steel dropside attachment 40cm (Fuhrmann profile) Vehicle delivery throughout Germany Registration throughout Germany Transfer license plate (valid for 5 days) Please note Weight specifications may vary depending on equipment, errors, prior sale and changes reserved! Dqkvwv Condition, drivability: roadworthy, warranty: vehicle warranty from the manufacturer

Overall weight: 18,000 kg, maximum load weight: 14,510 kg, axe configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,485 mm, loading space height: 1,000 mm, suspension: air-lift, tire size: 385/65 r22,5, Condition: new, Equipment: ABS, center pivot plate, tail-lift, trailer coupling, HUMBAUR 18.0 to building material trailer with platform length 7,100 mm, Typ. HD 18.0 building material (PLUS) --- --- INCLUSIVE hot-dip galvanized chassis & bogie INCLUSIVE aluminium dropside superstructure, anodized INCLUSIVE galvanized Kinnegrip stanchions with dropside partition, transverse at the rear INCLUSIVE gas pressure lifters integrated in the side walls INCLUSIVE SAF air suspension disc brake Equipment: * Permissible total weight 18,000 kg * Payload approx. 14,510 kg * Welded chassis frame with stretched cross members in lightweight construction * Loading area approx. 7,100 x 2,480 mm * Unloaded loading height approx. 1,285 mm Ws2Kweip * Overall dimensions: LxWxH approx. 8,900 x 2,550 x 2,485 mm (B dimension 8,850 mm) * ALU drop sides 1,000 mm high, anodized, can be folded down at the sides and rear, galvanized Kinnegrip stanchions, transverse at the rear * ALU front wall 1,200 mm high, anodized * Folding steps on the inside of the rear wall * Gas pressure lifters integrated in the side walls * 9-ton SAF Intradisc disc brakes 430mm * SAF air suspension with 385/65R22.5" tires * Drawbar 2,000 mm long, height-adjustable for coupling heights of approx. 700 - 900 mm * 40 mm DIN towing eye * Perforated outer frame, hole spacing 125 mm, 57 pairs of lashing holes, 2000 daN each * 2-circuit air brake system * EBS braking system 24 Volt * Spring-loaded parking brake * Hot-dip galvanized chassis & bogie * Mudguards with spray protection mats * Electrical system: 15-pin 24 Volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Simple and easy handling of the drop sides thanks to the gas pressure lifters * Ideal load securing options thanks to standard lashing options * Height-adjustable towing fork enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Overall weight: 3,000 kg, maximum load weight: 2,130 kg, axe configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, Condition: new, Humbaur three-way tipper HTK 3000.31 electrically tiltable permissible total weight: 3,000kg Internal box dimensions: 314x175x35cm (LxWxH) Equipment: * electrically tiltable with emergency hand pump * Rear swinging tailgate * Integrated ramp shafts * Chassis and tipper body welded and hot-dip galvanized * 2mm galvanized steel floor * 6 lashing eyes embedded in the loading area (800 kg per eye) * Aluminum drop sides 350 mm foldable and removable all round * Automatic support wheel * Lighting protected in the underride guard * 3-stage telescopic cylinder * 195/50 R13C tires * Braked with automatic reverse drive * 13-pin plug with reversing light * Maintenance-free rubber spring axles with independent suspension Dqmja2 Accessories subject to surcharge: * 100 km/h conversion for 250,- Euro incl. VAT * Grid attachment (60 cm) for 1,299 euros incl. VAT * Aluminum attachment walls for 949,- Euro incl. VAT * Set of crankable rear supports for 250 euros incl. VAT * Aluminum ramps (2,800 kg load capacity/pair) for 795 euros incl. VAT * High tarpaulin and bows on request Sales, advice and collection in Zell by appointment. Please note that due to the current shortage of materials at the suppliers, the offer prices for trailers, accessories and construction components may currently vary due to material surcharges. Subject to prior sale and errors excepted. Please ask for availability and final prices. Constantly large selection of new car trailers of the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Can also be ordered online. We are happy to provide you with our transfer license plate for 20 euros for home transport. Delivery within Germany possible for an extra charge!

Overall weight: 19,000 kg, maximum load weight: 14,950 kg, axe configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, Condition: new, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, * SAF axles * air-sprung * Drum brakes * Three side tipper * Chassis galvanized * Hardox steel body, KTL coated * Swivel drop sides with central locking Cdjckhj3Am * Left side wall can be folded down with spring support * Automatic rear wall release * 12 to support winch * 14,950 kg payload Price from Bernkastel-Kues

Overall weight: 19,000 kg, maximum load weight: 14,600 kg, axe configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air/air, tire size: 385/65 r22,5, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice Cp0Ukzl7N3 * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Overall weight: 19,000 kg, maximum load weight: 14,950 kg, axe configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, Condition: new, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, * SAF axles Inkxp3P * air-sprung * Drum brakes * Three side tipper * Chassis galvanized * Hardox steel body, KTL coated in RAL 2009 traffic orange * Swivel drop sides with central locking * Left side wall can be folded down with spring support * Automatic rear wall release * 12 to support winch * 14,950 kg payload Price from Bernkastel-Kues

Overall weight: 7,500 kg, empty load weight: 2,250 kg, maximum load weight: 5,250 kg, axe configuration: 2 axles, loading space length: 6,070 mm, loading space width: 1,450 mm, loading space height: 2,200 mm, suspension: air/air, tire size: 215/75 r15,7, color: orange, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 7.5 to tandem three-way tipper with ramp shaft, Typ. HTK 754020 Premium --- Bdqmf8Kt7Rp --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAW TUBE INCLUDING HOT-DIP GALVANIZED TIPPER BODY including lockable ramp cover with lid (privacy screen) --- --- Equipment: * Permissible total weight 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body & chassis through complete hot-dip galvanizing * Side walls in RAL color of choice (galvanized for an additional charge) * Laser-welded quality steel drop sides, 400 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Solid front wall made of galvanized steel, plugged and removable * Infinitely height-adjustable drawbar for coupling heights unloaded approx. 560 - 900 mm * DIN screw drawbar eye Ø 40 mm * Heavy-duty automatic support wheel * 2 pieces of 3 to lashing rings recessed in the corners * 3 pairs of 1 to drop lashing brackets recessed in the outer frame * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 215/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally available for an extra charge: * 1 pair of ALU drive-on ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (tare weight approx. 31 kg/each) * Plastic toolbox mounted under the loading area * Galvanized side walls * 24 volt electro-hydraulic system with battery and remote control * Steel attachments etc. ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works - Gersthofen

Overall weight: 19,000 kg, maximum load weight: 14,950 kg, axe configuration: 2 axles, loading space volume: 10 m³, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 800 mm, first registration: 11/2024, Condition: used, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, * SAF axles * air-sprung * Drum brakes * Three side tipper * Chassis galvanized * Hardox steel body, KTL coated in RAL 2009 traffic orange * Swivel drop sides with central locking * Left side wall can be folded down with spring support * Automatic rear wall release * 12 to support winch * 14,950 kg payload Price from Bernkastel-Kues Dpo7Xv

Overall weight: 18,000 kg, maximum load weight: 13,700 kg, axe configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, tire size: 435/50 r19,5, color: white, Condition: new, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 18.0 to tandem three-way tipper with ramp shaft, Typ. HTK 185024 Premium --- INCLUDING SAF air suspension with lifting & lowering function INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR including lockable ramp cover with lid (privacy screen) Equipment: Hckj2Fwne * Permissible total weight 18,000 kg * Payload approx. 13,700 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,135 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,750 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides in the desired color (RAL 9010 pure white) or hot-dip galvanized * Laser-welded quality steel drop sides, 600 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking bolted on * Removable rear stanchions * Dropside lifting springs on the side drop sides * Drawbar with spindle infinitely height-adjustable for coupling heights unbel. approx. 840 - 1,100 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t geared support winch with load and fast gear * SAF air suspension with lift & lower function * 10 6 t lashing rings recessed * Lateral / rear tipping angle: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system * EBS brake system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 435/50 R19.5 tires * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection through hot-dip galvanizing * Lower loading height thanks to the 435 tires * Safe loading and unloading thanks to telescopic folding supports at the rear * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t or 13 t/pair) with pin lock, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65-75 kg/each) * Plastic toolbox mounted under the loading area * LED rear lights 24 Volt or LED multi-voltage system for 12&24 Volt ∗Stock vehicle - available immediately ∗Subsequent sale reserved ∗Price ex works