Working platform semitrailer

MAX Maxtrailer LPRS 24 Plattform Containerverr.

Condition: new, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/65 r 22,5, color: white, Year of construction: 2023, Equipment: ABS, New, Disc brakes, 1st axle liftable, 3rd axle steerable, box truck with 1,500 mm steel cage guard, 800 mm aluminum side and rear rails, No. 4 pairs of 90 mm side holes for stanchions, No. 1 pair of front holes, No. 1 pair of rear holes, holes at the cage guard for resting stanchions, No. 12 1,200 mm stanchions, side hooks load stoppers, through-basket for woods, pvc box, wheel holder, ship hooks, pad wear kit Gkodpfsk Af Tlox Aaxed

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Delivery time: approximately 3-4 months after receipt of order! NEW VEHICLE Kässbohrer Platform Light SPS 3 # Unladen weight 6,100 kg # Fifth wheel load 15,000 kg # BPW axles with disc brakes # 1st axle as lift axle # Jost landing gear 24 t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tires: 6 x 385/65 R 22.5 brand-name tires # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width equipment (4 galvanized over-width panels with LEDs + 1 rotating beacon) Gedpfxjivw Dve Aaxokd # Stainless steel toolbox on the right in the direction of travel # 6 x 2 Jost container locks, retractable # Stanchion holder mounted on the front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 4t lashing rings on the platform # 108 lashing points on the outer frame, each with a capacity of 2t # Front wall with Code XL certification! # Chassis cathodic dip-coated and painted RAL 3020 Traffic Red # Front wall RAL 3020 Traffic Red ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH, 47574 Goch, Germany

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Gkedpfx Aaeugqvfexod Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,300 mm, Equipment: ABS, NEW VEHICLE Kässbohrer extendable platform SPA X3 Delivery time: approx. 4 months after order placement! # Fifth wheel load: 18,000 kg # Saddle height: 1,150 mm # Extendable by 3,500 mm Axles / Braking system: # BPW axles with 22.5" disc brakes # 3rd axle is a self-steering trailing axle # 1st axle is a lift axle # WABCO braking system 4S/3M # 6 branded tires 385/65/22.5" on steel rims # Jost landing legs 24t # Electrical connections: 2 x 7-pin and 1 x 15-pin # 24V Aspöck lighting system # 2 plastic wheel chocks Equipment: # Non-removable sliding table, 300 mm long # 30 mm hardwood floor # Oversize equipment (4x galvanized oversize panels with LEDs + 1x rotating beacon) # Stainless steel toolbox 1,000 mm x 500 mm x 500 mm, mounted on the right in the direction of travel # 6x2 retractable container locks # Stake holders mounted under the chassis + 18 stakes 100 mm x 50 mm # 6 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 13.4t, 8 x 2 lashing rings 8t, 108 lashing points on the outer frame, each rated at 2t # Front wall 1,500 mm high with Code XL certificate! # Chassis KTL-coated and painted RAL 3020 traffic red # Front wall RAL 3020 traffic red ----Subject to errors, modifications, and prior sale! Gedpfxsrvf Dko Aaxjkd Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam Gkodpfxowvzg Re Aaxed - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered Godpfx Ajxn E I Hsaxekd * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Loading platform surfa

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism Gkedpfx Asxgk U Noaxjd * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge Gedpsxq S H Ijfx Aaxskd - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/1900, suspension: air, tire size: -, Year of construction: 1900, * Length: 13.55 m * 12 twistlocks * 1x20’, 2x20’, 30’, 40’ * Coupling height: 1150 mm * Front bulkhead: 1.60 m * 12 steel posts at 1.60 m * Solid KAPUR floor, 34 mm * UPN 140 side member * First axle liftable * Spare wheel holder Godpfxjxtf Iwj Aaxokd * PVC toolbox * Long mesh rack * 13 lashing rings (2T each side) * LED work lights Lift axle Tyre info: 385/65R22.5 Delivery time (days): 1 Manufacturer Condition: New

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads Coupling device: * 2-inch kingpin Landing gear: * 2 x 12 t landing legs with compensating foot and single-side operation on the right front side Axles: * 3 x 9 t air suspension axle units * Disc brakes * SAF brand, with disc brake approx. 430 x 45 mm * ABS * Centrally positioned wheel mounting, 10-hole with ET 120 * Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent Brake system: * Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice Mudguards: * According to EC, PVC mudguards in front of and behind the axle unit Spare wheel holder: * 1 double basket incl. mounting kit for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t * Outer frame with holes for tension straps approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting system: * EC compliant, 24 volts with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross member Equipment: * ECE 70 warning board * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single color * Chassis: RAL 3002 (carmine red) Gkjdpfxjwx Db Aj Aaxod * Sideboards: Anodized * Sideboard stanchions: RAL 3002 (carmine red) * SSV: Aluminum anodized * Hubs: KTL coated * Rear underrun guard: white (RAL 9010) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading deck * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front wall * Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis * Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible