Three-way tipper trailer

MÜLLER-MITTELTAL 19t Alu 3 S-K, Plane, Podest,

Condition: used, overall weight: 30,000 kg, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dksljwxyb Sohcdw Dop

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,850 kg, axle configuration: 3 axles, loading space width: 2,520 mm, first registration: 05/2022, next inspection (TÜV): 06/2025, total width: 2,520 mm, Equipment: ABS, More vehicles available at Excerpt from the equipment list. Complete equipment details on request. * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * 1 removable rotating beacon (warning light), including holder and installation * Warning package for special permit § 70 StVZO * GIGANT axles, 17.5 inch * Mechanical equalizer suspension with parabolic springs, rear La-Si package * 2 pcs UVV lashing eyes approx. LC 6,400 daN on the turntable platform, front left and right on the main frame * 4 pcs UVV lashing eyes approx. LC 13,400 daN hanging in the outer frame, 2 pcs ahead of the minor drop on the turntable platform, 2 pcs ahead of the rear crossmember * 6 pcs UVV lashing rings approx. LC 10,000 daN, pivotable and lowerable, loadable in all directions, 2 pcs after the minor drop, 2 pcs center of the low-bed platform, 2 pcs between the rear axles * Wooden floor, clamped version * Folding, galvanized outriggers and wooden planks for widening (not applicable at the rear slope) * Plank holder under the chassis lengthwise (maximum load width 2,500 mm) * Continuous excavator arm storage above the rear axle up to the rear end crossmember, total length approx. 2,100 mm; crossmember at the approach slope, tapered, width top/bottom approx. 780/400 mm, height approx. 170 mm * 2 pairs of lashing eyes approx. LC 6,400 daN in the excavator arm storage, welded to the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the slope * Spare wheel holder under the chassis, without spare wheel * Toolbox made of black powder-coated sheet steel, lockable, dimensions: approx. W=650 x H=300 x D=600 mm (up to approx. 45 kg payload with even loading) on the right-hand side in direction of travel * Drawbar approx. 150 mm offset with swiveling towing eye 40/50 mm (without 8° eye, mind the coupling height), base length approx. 1,800 mm Djlhcdswwy Ddjw Dokp Note: The underrun protection of the truck must be ahead of the coupling point; otherwise, there is an increased risk of collision! D = 125 / 160 kN * Chassis and turntable hot-dip galvanized (without top coat) * Drawbar, turntable, axles with springs, as well as air reservoirs finished in black Towing vehicle * Coupling height: Standard approx. 840 - 1,025 mm unladen Electrics * 24 volts, 15-pin Compressed air * red/yellow Paintwork * Wheels: silver * Chassis/turntable: hot-dip galvanized * Drawbar, turntable, axles with springs, air reservoirs: black * Painted galvanized outer frame left and right: RAL3002 Carmine Red * Ramps: hot-dip galvanized

Condition: used, overall weight: 24,000 kg, maximum load weight: 17,650 kg, axle configuration: 3 axles, first registration: 05/2000, Ref. No.: 1999 Low loader trailer Müller Mitteltal PT Dkjlhcswwyupjdw Dop 3 axles Gross weight 24,000 kg Payload approx. 18 t Hydraulic ramps New wooden floor Very good condition

Condition: used, overall weight: 30,000 kg, maximum load weight: 23,940 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 10/2025, Müller Mitteltal 3 axle low loader trailer with ramps type T3 Profi Total weight 24,000 / 30,000 kg Payload 17,940 / 23,940 kg Empty weight 6,060 kg Total length 10,800 mm Loading length 8,300 mm / loading bed 6,500 mm Loading height 900 mm Dolhcsv Hl Rijdw Djkp Parabolic suspension Wider extensions with warning signs Large lashing package Long ramps with spring jack Tool box Storage box in offset Vehicle is available immediately. Other 3 and 4 axle low loader trailers, new and used, available immediately More information at:

Condition: used, overall weight: 45,000 kg, maximum load weight: 34,400 kg, axle configuration: 3 axles, first registration: 04/2009, next inspection (TÜV): 07/2024, Equipment: ABS, Further questions via WhatsApp Dslhot E Eunocdw Dskp

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TA-ER 14.4 Plateau: * RDÜ (tire pressure monitoring) * EBS (electronic braking system), * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. Warning sign packages at the front and rear * Drawbar height adjustable by 300 mm with 40 mm flange drawbar eye Dkelhcdwom Tgxwo Dep * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic tool boxes approx. 750 x 350 x 300 mm on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fender * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights. at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 mtr. Cont. external width) and lockable * Locking dimension pushed in according to ISO - DIN 15190 = 2,259 mm. Cont. locks pulled out = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm * Perforated external frame bent at approx. 45 degrees with 2 ton. lashing force every 480 mm, installation of 3 ton. drop lashing brackets every 600 mm possible - 5 x 3 ton. UVV lashing brackets installed on the sides -, 1 x 6.3 ton in the corners at the front and rear. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the back in the end beam) in the front and end beam various holes for 1.2 ton lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 ton / pair) suitable for rubber-tired and tracked vehicles * storage compartment below the loading area in the chassis from the rear * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange drawbar eye painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf on the A7

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Djlhcdjwxdf Uow Dskp

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear Dkolhcdwetplwie Djp * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: used, overall weight: 30,000 kg, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, axle configuration: 3 axles, loading space length: 9,200 mm, first registration: 05/2012, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Dolhcdwjwxavis Dskp

Condition: used, overall weight: 30,000 kg, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, axle configuration: 3 axles, loading space length: 9,200 mm, first registration: 05/2012, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Dolhjwvbftecdw Dokp