Combine harvester

CLAAS Lexion 8700 TT

Condition: used, Year of construction: 2023, operating hours: 639 h, power: 430 kW (584.64 HP), maximum speed: 30 km/h, mileage: 2,240 km, Operating hours: 639, First registration: 12.06.2023 Used Claas Lexion 8700 TT Auto Contour Tow hitch Header brake 3D cleaning CEBIS display Radial distributor Track roller system Rear tires: 500/85R30 30 km/h machine 430 kW Automatic air conditioning Fpsdpfx Aow U Ui Usaxep Quantimeter GPS Pilot Ready Automatic discharge direction adjustment Electric mirrors Year of manufacture: 2023 650 engine hours 441 drum hours Including attachments: Claas Vario 1080 header Serial No.: 82300537e236290 Year of manufacture: 2022 Including rapeseed kit Claas transport trailer Serial No.: 52302039e236291 Tires: 500/85 R30 30 km/h Trimble GPS guidance system 3D sieve box Header brake (SW brake) Camera on grain tank unloading auger Drawbar Location: ASL

Condition: new, maximum load weight: 29,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,100 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * External main frame Fpodpfxsgvr T Ho Aaxjp * Hydraulic steering * Comprehensive load securing package * Low bed length: 11,750 mm (6,100 mm + 5,650 mm) or 12,400 mm (6,700 mm + 5,700 mm) * Unladen weight: 13,700 kg (+/- 2%) * Optional: extensive range of accessories This semi-trailer is available with a low bed length of 6,700 mm or 6,100 mm and a short delivery time. Images may differ from the original. All information provided without guarantee. Contact: Tel.:

Condition: used, Year of construction: 2024, operating hours: 275 h, power: 460 kW (625.43 HP), maximum speed: 30 km/h, front tire size: Raupe | 100%, rear tire size: 500/85R30 | 100%, tire size: 500/85R30, tire condition: 100 %, Tyres (front): track, tyres (rear): 500/85R30, operating hours: 275, first registration: 28.05.2024 _____ Used Claas Lexion 8700 TTDigital Package II - Cemis Machine Connect License # 5 years CEMIS 1200 terminal SAT 900 GNSS receiver GPS Pilot activation # SAT 900 GNSS receiver, networked documentation license - 5 yearsCEMOS CRUISE PILOT package auto module CRUISE PILOT, prepared for CEMOS AUTOMATIC - CRUISE PILOTFeeder housing cylinder with 2-way system, XLV channel-AUTO CONTOUR, chain, open idler rollerDust extraction for E-/V-/HP-channelFeeder housing brakeJET STREAM cleaning incl. 3DReversal volume meter with CEBIS displayGrain tank unloading tube 3XL, diameter 330 mmRadial distributor grain - SPECIAL CUT, PREMIUM LINEAdditional pump for straw chopper drive with chaff spreader fanAuxiliary wheels for track systemSteering axle L, adjustableSteering axle tyre 500/85 R30 x 335 IMP, 10-hole, MitasMax. speed 30 km/hMercedes Benz OM473 LA - 460 kW/625 HP (Stage V)Automatic climate control with heating incl. pre-filterRadio sound system, digital (DAB+)Camera - rear, display on terminalCamera - trailer coupling, PROFI CAM displayCamera - grain tank unloading tube, PROFI CAM displayCamera screen - PROFI CAMLED working lights - PlusCool box incl. instructor seatCEMOS DIALOG via CEBISCEMOS AUTOMATIC - AUTO CROP FLOWCEMOS AUTOMATIC - AUTO SLOPECEMOS AUTOMATIC - 4D cleaningAutomatic throw direction adjustmentStraw chopper - counterblade/grate floor adjustment, manualDynamic steering12.30m Vario header with rapeseed knifeTransport trailer with 4-wheel steering413 engine hours275 drum hours1593 ha, Location: LU Hein rental Fodsu Syinjpfx Aaxspp

Condition: used, Year of construction: 2024, operating hours: 347 h, power: 460 kW (625.43 HP), maximum speed: 30 km/h, front tire size: Raupe | 100%, rear tire size: 500/85R30 | 100%, working width: 1,230 mm, tire size: 500/85R30, tire condition: 100 %, Tyres (front): Track, Tyres (rear): 500/85R30, Operating hours: 347, First registration: 27.05.2024. Used Claas Lexion 8700 TT Digital Package II – Cemis Machine connect license # 5 years, CEMIS 1200 terminal, SAT 900 GNSS receiver, GPS Pilot activation # SAT 900 GNSS receiver, Connected Documentation license – 5 years CEMOS CRUISE PILOT package: Automodule CRUISE PILOT, prepared for CEMOS AUTOMATIC – CRUISE PILOT Cutterbar cylinder with 2-way system, XLV channel AUTO CONTOUR, chain, open deflection roller Dust extraction for E-/V-/HP-channel Cutterbar brake JET STREAM cleaning incl. 3D Reverse volume measurement with CEBIS display Grain tank discharge tube 3XL, diameter 330 mm Radial spreader – SPECIAL CUT, PREMIUM LINE Auxiliary pump drive for straw chopper with chaff spreader blower Support wheels for track system Steering axle L, adjustable Steering axle tyres 500/85 R30 x 335 IMP, 10-hole, Mitas Travel speed 30 km/h Mercedes Benz OM473 LA – 460 kW/625 HP (Stage V) Automatic climate control with heating, including additional pre-filter Radio sound system, digital (DAB+) Camera – rear, display in terminal Camera – hitch, PROFI CAM display Camera – grain tank discharge tube, PROFI CAM display Camera screen – PROFI CAM LED work lights – Plus Refrigerator, including instructor seat CEMOS DIALOG via CEBIS CEMOS AUTOMATIC – AUTO CROP FLOW CEMOS AUTOMATIC – AUTO SLOPE CEMOS AUTOMATIC – 4D cleaning Automatic throw direction adjustment Straw chopper – counter-knife/friction plate adjustment, manual Fedpfovf Dbqjx Aaxjpp Dynamic steering Header Claas Vario 12.30 m No. 82301162, year 2024, with rapeseed equipment Claas transport trailer No. 52302725 Engine hours: 347 Drum hours: 219 1,254 ha harvested Location: Schora

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles Fjdpfx Aask Af Svjxopp -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, Year of construction: 2023, operating hours: 709 h, power: 430 kW (584.64 HP), maximum speed: 30 km/h, front tire size: Raupe | 90%, rear tire size: 500/85R30 | 85%, mileage: 2,077 km, tire size: 500/85R30, tire condition: 85 %, Tyres (front): Track, Tyres (rear): 500/85R30, Operating hours: 709, First registration: 09.06.2023 Used Claas Lexion 8700 Auto Contour Header brake APS threshing system 3D cleaning Radial distributor Terra Trac Steering axle tyres 500/85R30 30 km/h 430 kW Automatic climate control Quantimeter Claas Remote Service Fpodpjvdiq Usfx Aaxop Comfort seat, air-suspended CEMOS Automatic Auto Crop Flow CEMOS Automatic Auto Slope CEMOS Automatic Cruise Pilot CEMOS Automatic 4D cleaning Electric mirrors Incl. attachments Claas Vario 1080 header Serial no.: 82300576e235752 Year of manufacture: 2023 Claas transport trailer Serial no.: 52302156e235753 709 engine hours 466 drum hours 2,076 ha Location: Schora

Condition: used, Year of construction: 2024, operating hours: 704 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 704, First registered: 02/02/2024_____Basic equipment/technical dataENGINE Max. power 195/265 kW/hp (ISO 14396) Max. torque 1200 NmMaximum power with power management 209/285 kW/hp Max. torque with power management 1257 nM 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emissions standard (DOC+SC+SCR) without exhaust gas recirculation stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooler package Additional fuel pre-filter with water separator 500 liter fuel tank Fpjdovgk Iajpfx Aaxep

Condition: new, empty load weight: 12,700 kg, maximum load weight: 36,300 kg, overall weight: 49,000 kg, axle configuration: 2 axles, loading space length: 6,620 mm, loading space width: 2,540 mm, loading space height: 300 mm, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: -robust, weight-optimized, closed steel construction All-terrain hook coupling with manual tilt lock Loading area with anti-slip sanding and safe access on the right with grab rails Hydraulic and electric controls on the left-hand side, illuminated -Optional electric PPU and electrics protected on the right-hand side Load-holding valves on the gooseneck cylinders -1 piece neck support cylinder for supporting the neck on the tractor unit -hydromechanical dual-circuit forced steering -Hydraulic, electric, pneumatic connecting couplings on the left, easily and ergonomically accessible from the outside -Connection for hydraulic supply from tractor or external PPU at the front, with optional E-PPU the external connections are omitted Fedpfsl H A I Ujx Aaxjpp Loading platform: -robust, weight-optimized, box girder steel construction with hook coupling at the front, welded to the platform trailer at the rear -stable, optional outriggers, foldable for flatbed bridges, for placing or inserting optional support elements -solid, optional support elements made from spruce or optionally from oak wood -for flat-bed bridges, optional shelves that can be inserted between the girders of the bridge and covered with spruce wood -Fastenings for container holders for 208 and 408 containers on the telescopic beam -protected internal energy supply system in the bridge girder -Manual, spring-loaded locking mechanism between the inner and outer telescopic beams on telescopic bridges Rear running gear: -robust, weight-optimized steel construction with welded-on loading bridge at the front, without coupling at the rear, very compact design -Frame with prismatic excavator trough over the entire length of the vehicle -Sturdy rear underride guard in accordance with the applicable EC directives -folding lashing rings at the height of the outer edge of the platform between the axle lines -2 folding lashing rings at the front of the vehicle above the bridge connection -single-tyred pendulum axle bogies with large hydraulic axle compensation and hose rupture safety valves on all lifting cylinders -Hydromechanical dual-circuit forced steering with a maximum steering angle of 55°, optimized for low tire wear and high manoeuvrability Pneumatic function controls on the left-hand side of the platform Brake system: 2-line all-wheel pneumatic brake with spring-applied parking brake and EBS, ALB control, automatic slack adjuster (AGS) and ABS function Electrical system: -side marker lights at the prescribed distance along the entire length of the vehicle -marker and clearance lights at the prescribed positions -2 7-pin sockets per side, at the rear between the carriers -Weather-protected 24V lighting and electrical system in accordance with European regulations -Side marker lights at the prescribed distance of max. 3,000 mm over the entire length of the bridge -Weather-protected 24V lighting and electrical system in accordance with European regulations with protected rear lighting recessed in the rear -7-chamber lights at the rear with integrated reversing and rear fog light -Side marker lights at a maximum distance of 1500 mm along the entire length of the vehicle License plate lighting for single-line license plate Tires: -245 / 70 R17.5 Paintwork: -blasting of the welded vehicle steel structure in SA2.5 or DIN55928-4 quality class 2 -1 layer 2-component epoxy-zinc-dust

Condition: used, operating hours: 2,809 h, Equipment: crop cutter, rape cutter, TX 67 (0010) Used New Holland combine harvester (0020) TX 67 (0030) with header and header trailer (0040) with rapeseed table Fpodjwzzwmepfx Aaxep

Condition: used, mileage: 9,440 km, power: 382 kW (519.37 HP), first registration: 01/2024, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: air conditioning, had accident, * !Engine running! * Multifunction steering wheel * Automatic climate control * Sleeping bed * Cruise control * Hill start assist Fpodpsvy R Iyofx Aaxjp * Leaf/air suspension * Hydraulics * Differential lock -----Internal vehicle number: 10295----Subject to errors and prior sale.