Other

VARIANT 3521 U5 MAXI LOAD 520X210X30CM 3500kg

Overall weight: 3,500 kg, Empty load weight: 1,010 kg, Maximum load weight: 2,490 kg, Axe configuration: 3 axles, Loading space length: 4,600 mm, Loading space width: 1,980 mm, Loading space height: 300 mm, Loading space volume: 2.8 m³, Color: silver, Condition: new, Construction height: 1,680 mm, Working width: 2,530 mm, incl. rear ramp / parabolic suspension / spare wheel / bucket storage, automatic reverse drive, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 1010 kg - Payload: 2,490 kg - Interior dimensions: 460 x 198 x 30 cm (L x W x H) - Overall exterior dimensions: 660 x 253 x 168 cm (LxWxH) - Loading sill height: 38 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle body: - Brake: yes - Number of axles: 3 - Floor: Wood, Finnish multiplex board - Side walls: Sheet steel, single-walled - Side wall height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 7 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. hot-dip galvanized - steel ramp standing on shaft 130cm - sturdy eccentric locks - support brackets on ramp - lifting aid for ramp - very low chassis for low ramp angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 10x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bok7Wvxnvkk

Overall weight: 3,500 kg, Empty load weight: 631 kg, Maximum load weight: 2,869 kg, Axe configuration: 2 axles, Loading space volume: 1 m³, Loading space length: 3,000 mm, Loading space width: 1,620 mm, Loading space height: 230 mm, Color: silver, Condition: new, Construction height: 1,500 mm, Working width: 2,080 mm, Automatic reverse drive, drive-on ramp, hot-dip galvanizing, 18 mm floor plate, parabolic suspension, rear ramp, sloping rear, *INSTANTLY AVAILABLE * incl. 18 mm floor plate / parabolic suspension / rear ramp / sloping rear Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 631 kg - Payload: 2,869 kg - Interior dimensions: 300 x 162 x 23 cm (L x W x H) - Overall exterior dimensions: 482 x 208 x 150 cm (LxWxH) - Loading sill height: approx. 33 cm - Tires: 195/60R12C - Brakes: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18 mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 23 cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 22 - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 8 pieces on the side edge (1000kg/daN) - Supports: integrated in ramps - Ramps: 1x upright on shaft 1500kg loadable - Plug lighting: 13-pin - Approval: COC papers Standard equipment: - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Side walls 23cm high - Hot-dip galvanized steel ramps, upright - Very stable welded steel frame - Solid walk-on steel mudguards - Frame cpl. Parabolic spring axles (leaf spring suspension) - Beavertrail rear / low drive-on for working platforms and excavators - Many stable cross beams for high point loading - Lashing rings mounted in the outer frame 8 pieces (4 pairs), tensile force 1000 kg per lashing ring - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramps - 13-pin plug - Reversing lights - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval - bucket tray - spare wheel - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Bke397Inyyu

Overall weight: 3,500 kg, Empty load weight: 596 kg, Maximum load weight: 2,904 kg, Axe configuration: 2 axles, Loading space volume: 1 m³, Loading space length: 3,000 mm, Loading space width: 1,620 mm, Loading space height: 230 mm, Color: silver, Condition: new, Construction height: 1,500 mm, Working width: 2,080 mm, Automatic reverse drive, drive-on ramps, hot-dip galvanizing, 18 mm floor plate, parabolic suspension, sloping rear, *INSTANTLY AVAILABLE * incl. 18 mm floor plate / parabolic suspension / drive-on ramps / sloping rear Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 596 kg - Payload: 2,904 kg - Interior dimensions: 300 x 162 x 23 cm (L x W x H) - Overall exterior dimensions: 482 x 208 x 150 cm (LxWxH) - Loading sill height: approx. 33 cm - Tires: 12 inch - Brakes: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18 mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 23 cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 22 - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 8 pieces on the side edge (1000kg/daN) - Supports: integrated in ramps - Ramps: 2x standing on shaft 1500kg loadable - Plug lighting: 13-pin - Approval: COC papers Standard equipment: - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Side walls 23cm high - Hot-dip galvanized steel ramps, upright - Very stable welded steel frame - Solid walk-on steel mudguards - Frame cpl. Parabolic spring axles (leaf spring suspension) - Beavertrail rear / low drive-on for working platforms and excavators - Many stable cross beams for high point loading - Lashing rings mounted in the outer frame 8 pieces (4 pairs), tensile force 1000 kg per lashing ring - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramps - 13-pin plug - Reversing lights - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval - bucket tray - spare wheel - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bke3Szbt7Mh

Maximum load weight: 2,330 kg, Operation weight: 3,500 kg, Year of construction: 2024, Condition: new, ANHÄNGERWIRTZ the online pick-up market for your new trailer offers strong brands! Bkv7P78A2Xf over 700 new trailers in stock over 130 used trailers always on offer non-binding example: New model 2024 available ! Variant Multitransporter 3563 UX 620x210x30cm 3800kg braked tandem high loader low chassis 13", flatbed tiltable with double-acting hand hydraulics, aluminum drop sides 30cm foldable, loading flap continuous 90cm high with lifting aid, DIN lashing bracket in the chassis edge, automatic jockey wheel..... New model 2024 ! Sale by phone or with appointment on site during our opening hours Mon. - Fri. 08. 00 - 12. 30 h & 14. 00 - 18. 00 h or around the clock via our trailershop Content and images are subject to copyright - Logos trademark protection sample Article no.: VDK-3563UX30

Overall weight: 3,500 kg, Empty load weight: 815 kg, Maximum load weight: 2,685 kg, Axe configuration: 2 axles, Loading space length: 4,000 mm, Loading space width: 1,800 mm, Loading space height: 300 mm, Color: silver, Condition: new, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / sloping rear / spare wheel / bucket tray Technical data: - Type: New vehicle Cluzgc83Fa - TÜV: New/2 years - Availability: IMMEDIATELY !!! - permissible total weight: 3.500kg - Unladen weight: approx. 815 kg - Payload: approx. 2,685 kg - Interior dimensions: 400 x 180 x 30 cm (L x W x H) - Overall external dimensions: 600 x 234 x 168 cm (LxWxH) - Loading sill height: approx. 30 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100km/h: optional - incl. vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Dropside height: 30cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 12° - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 10 outside and 8 inside - Supports: integrated in ramps - Ramps: Ramp standing on shaft - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Lockable coupling head - Bucket storage - Spare wheel - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Drop sides 30cm high - Hot-dip galvanized upright steel ramps, - Very sturdy welded steel frame - Solid walk-on steel mudguards - Frame completely hot-dip galvanized - Parabolic spring axles (leaf suspension) - Beavertrail rear / low drive-on for work platforms and excavators - Many stable cross members for high point loading - Lashing rings mounted in the outer frame 10 pieces (5 pairs), tensile force 1000 kg per lashing ring - Lashing eyes mounted on the inside 8 pieces (4 pairs) - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramp - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in the rear frame - Rear side position lights - Automatic center support wheel - Registration papers: COC papers Special equipment included in the price: - Full-length rear ramp Accessories can be retrofitted - please enquire: - 100km/h approval - storage box - net hooks - Additional lashing eyes - reversing light - Lashing straps - and much more. New vehicle with warranty and TÜV.

Overall weight: 3,500 kg, Empty load weight: 785 kg, Maximum load weight: 2,715 kg, Axe configuration: 2 axles, Loading space length: 4,000 mm, Loading space width: 1,800 mm, Loading space height: 300 mm, Color: silver, Condition: new, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / sloping rear / spare wheel / bucket tray Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - permissible total weight: 3.500kg - Unladen weight: approx. 785 kg - Payload: approx. 2,715 kg - Interior dimensions: 400 x 180 x 23 cm (L x W x H) - Overall external dimensions: 600 x 234 x 168 cm (LxWxH) - Loading sill height: approx. 30 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100km/h: optional - incl. vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Dropside height: 30cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 12° - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 10 outside and 8 inside - Supports: integrated in ramps - Ramps: Ramp standing on shaft - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Lockable coupling head - Bucket storage - Spare wheel - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Drop sides 30cm high - Hot-dip galvanized upright steel ramps, - Very sturdy welded steel frame - Solid walk-on steel mudguards - Frame completely hot-dip galvanized - Parabolic spring axles (leaf suspension) - Beavertrail rear / low drive-on for work platforms and excavators - Many stable cross members for high point loading - Lashing rings mounted in the outer frame 10 pieces (5 pairs), tensile force 1000 kg per lashing ring - Lashing eyes mounted on the inside 8 pieces (4 pairs) - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramp - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in the rear frame - Rear side position lights - Automatic center support wheel - Registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - Storage box - net hooks - Additional lashing eyes - reversing light - Lashing straps - and much more. New vehicle with warranty and TÜV. Ewkrfxp8

Axe configuration: 2 axles, Loading space length: 5,200 mm, Loading space width: 2,100 mm, Loading space height: 300 mm, Suspension: other, Color: silver, Condition: new, Gearing type: other, Driver cabin: other, Emission class: none, 9927645 Variant universal machine transporter - 2-axle, Manufacturer: Variant, Type: 3521 U5, Internal dimensions loading area: 5200 x 2100 x 300 mm L.W.H., Overall dimensions: 6730 x 2200 x 1590 mm L.W.H., Perm. Gross weight: 3500 kg, Payload: 2540 kg (payload specifications may vary depending on equipment and design), Unladen weight: 960 kg, Loading area can be tilted hydraulically, Extremely robust drive-on ramp (900 mm) with 9 struts and lifting aid, 10 stable, flush floor lashing eyes on the side in the V-profile, Aluminium drop sides and corner stanchions can be removed without tools, Durable and rattle-free tension locks, Very stable frame with numerous cross struts, fully hot-dip galvanized, Folding bulkhead enables longer materials to be transported, Automatic support wheel, marker lights, 13 inch tires ensure a low loading height of 63 cm, lighting securely installed in the light carrier, 13-pin plug, This Variant trailer is the universal all-rounder and is not only suitable for the convenient transport of vehicles and all types of machinery, but also for heavy loads and pallets of goods of all kinds., Possible further options and accessories for this trailer:, raised side wall, ladder rack on the front wall, tool box, plug-in cable winch with cable winch, anti-theft device, floor lined with aluminum checker plate, For individual and tailor-made financing, simply contact us! Another 1000 trailers at the Rosemeier Trailer Center. Take a look around. We will be happy to advise you. Czgygygnpe

Overall weight: 3,500 kg, Empty load weight: 784 kg, Maximum load weight: 2,716 kg, Axe configuration: 2 axles, Loading space length: 5,150 mm, Loading space width: 2,050 mm, Loading space height: 350 mm, Color: silver, Condition: new, * AVAILABLE IMMEDIATELY incl. low chassis, aluminum drop sides, ramp shaft Cvbm7N7R Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - permissible total weight: 3500kg - Unladen weight: 784 kg - Payload: 2,716 kg - Interior dimensions: 515 x 205 x 35 cm (L x W x H) - Overall external dimensions: 659 x 210 x 100 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/50R13C - Brake: Yes - Support wheel: Yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Side walls: double-walled anodized aluminium - Side wall height: 35cm - Removable drop sides: four walls can be folded down - Side panel hinges: 6 side / 3 front + rear - Corner stanchions removable: Yes - Chassis: High loader, rubber spring axle - Overrun hitch & brake: KNOTT - Frame/chassis: V-type drawbar - Attachment: at extra cost - Locks: Recessed long lever locks - Lashing eyes: 10 recessed inside - Net hooks: optional - Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Torsion-resistant side member chassis for safe driving characteristics - Many cross members for high point loading - Anodized double-walled aluminium drop sides - Dropside foldable on 4 sides - Drop sides all removable - Made of multi-glued screen printing plate, 18 mm, slip-resistant and waterproof - Corner stanchions with insertion option for attachments or grids - Maintenance-free rubber spring axles - Axle with continuous axle beam and independent wheel suspension - 10 lashing anchors recessed in the floor frame profile - Recessed long lever locks - Sturdy V-drawbar - Maintenance-free rubber spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing light - Large dimensioned safety lighting - Lighting recessed in the rear frame, - Integrated rear fog light - 13-pin plug - Support wheel in the center - Registration documents: Vehicle registration certificate (ZBII) & COC papers Accessories can be retrofitted - please enquire: - Perforated railing on dropside - High grille at the front - High tarpaulin - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV.

Overall weight: 3,500 kg, Empty load weight: 680 kg, Maximum load weight: 2,820 kg, Axe configuration: 2 axles, Loading space length: 4,150 mm, Loading space width: 2,050 mm, Loading space height: 350 mm, Color: silver, Condition: new, * AVAILABLE IMMEDIATELY incl. low chassis, aluminum drop sides, ramp shaft Uagsfyek Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - permissible total weight: 3500kg - Unladen weight: 680 kg - Payload: 2,820 kg - Interior dimensions: 415 x 205 x 35 cm (L x W x H) - Overall external dimensions: 569 x 210 x 100 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/50R13C - Brake: Yes - Support wheel: Yes, - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Side walls: double-walled anodized aluminium - Side wall height: 35cm - Removable drop sides: four walls can be folded down - Side panel hinges: 4 side / 3 front + rear - Corner stanchions removable: Yes - Chassis: High loader, rubber spring axle - Overrun hitch & brake: KNOTT - Frame/chassis: V-type drawbar - Attachment: at extra cost - Locks: Recessed long lever locks - Lashing eyes: 10 recessed inside - Net hooks: optional - Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Torsion-resistant side member chassis for safe driving characteristics - Many cross members for high point loading - Anodized double-walled aluminium drop sides - Dropside foldable on 4 sides - Drop sides all removable - Made of multi-glued screen printing plate, 18 mm, slip-resistant and waterproof - Corner stanchions with insertion option for attachments or grids - Maintenance-free rubber spring axles - Axle with continuous axle beam and independent wheel suspension - 10 lashing anchors recessed in the floor frame profile - Recessed long lever locks - Sturdy V-drawbar - Maintenance-free rubber spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing light - Large dimensioned safety lighting - Lighting recessed in the rear frame, - Integrated rear fog light - 13-pin plug - Support wheel in the center - Registration documents: Vehicle registration certificate (ZBII) & COC papers Accessories can be retrofitted - please enquire: - Perforated railing on dropside - High grille at the front - High tarpaulin - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV.

Overall weight: 3,500 kg, Empty load weight: 1,072 kg, Maximum load weight: 2,428 kg, Axe configuration: 3 axles, Loading space length: 5,200 mm, Loading space width: 2,100 mm, Loading space height: 300 mm, Color: silver, Condition: new, * IMMEDIATELY AVAILABLE * special offer price for stock vehicle! incl. 18 mm base plate / parabolic suspension / drive-on ramp / tiltable Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3,500 kg - Unladen weight: approx. 1,072 kg - Payload: approx. 2,428 kg - Interior dimensions: 520 x 210 x 30 cm (L x W x H) - Overall external dimensions: 673 x 220 x 159 cm (LxWxH) - Loading sill height: approx. 65 cm - Tires: 195/50R13C - Brake: yes - Support wheel: yes, automatic - 100km/h: optional - incl. vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Side walls: double-walled aluminum - Dropside height: 30cm - Chassis: KNOTT parabolic suspension - Tipping function: YES - Hydraulics: Manual hydraulics - Drive-on angle: approx. 11° - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 8 pieces on the side edge - Supports: when tipping through the rear - Ramps: 1x upright on shaft 90cm - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Parabolic spring axle (leaf spring suspension) for extreme loads and driving comfort - Folding aluminum drop sides - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Drop sides 30 cm high - Hot-dip galvanized steel drive-on ramp, upright, - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Rubber spring axle - Many sturdy cross members for high point loading - Lashing rings mounted in the outer frame 8 pieces (4 pairs) - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramps - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in the rear frame Bkbzicxy9Ju - Rear side position lights - Automatic center support wheel - Registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - Spare wheel - storage box - net hooks - Additional lashing eyes - reversing light - Lashing straps - and much more. New vehicle with warranty and TÜV.

Overall weight: 3,500 kg, Empty load weight: 680 kg, Maximum load weight: 2,820 kg, Axe configuration: 2 axles, Loading space volume: 3.5 m³, Loading space length: 4,150 mm, Loading space width: 2,050 mm, Loading space height: 350 mm, Color: silver, Condition: new, Construction height: 1,000 mm, Working width: 2,100 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Low chassis, Aluminium drop sides, Ramp shaft, * IMMEDIATELY AVAILABLE * incl. Low chassis, Aluminium drop sides, Ramp shaft Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3500kg - Unladen weight: 680 kg - Payload: 2,820 kg - Interior dimensions: 415 x 205 x 35 cm (L x W x H) - Overall exterior dimensions: 569 x 210 x 100 cm (L x W x H) - Loading sill height: 60 cm - Tires: 195/50R13C - Brakes: Yes - Support wheel: Yes, - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Drop sides: anodized aluminium, double-walled - Drop side height: 35cm - Removable drop sides: four walls can be folded down - Drop side hinges: 4 side / 3 front + rear - Removable corner posts: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: KNOTT - Frame/chassis: V-traction fork - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 10 recessed inside - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Torsion-resistant side member chassis for safe driving characteristics - Many cross members for high point loads - Double-walled anodized aluminium drop sides - Drop sides foldable on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, anti-slip and waterproof - corner stanchions with insertion option for attachments or grids - maintenance-free rubber spring axles - axle with continuous axle beam and independent wheel suspension - 10 lashing anchors recessed in the floor frame profile - recessed long lever locks - sturdy V-drawbar - maintenance-free rubber spring axle from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - lighting recessed in rear frame - integrated rear fog light - 13-pin plug - central jockey wheel - registration papers: vehicle registration document (ZBII) & COC papers Accessories can be retrofitted - please enquire: - perforated railing on dropside - high front grille - high tarpaulin - spare wheel - storage box - rear supports - ramps - flat tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ch8Zxlhgw

Overall weight: 3,500 kg, Empty load weight: 872 kg, Maximum load weight: 2,628 kg, Axe configuration: 2 axles, Loading space volume: 5.2 m³, Loading space length: 6,150 mm, Loading space width: 2,050 mm, Loading space height: 350 mm, Color: silver, Condition: new, Construction height: 1,000 mm, Working width: 2,100 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Low chassis, Aluminium drop sides, Ramp shaft, * IMMEDIATELY AVAILABLE * incl. Low chassis, Aluminium drop sides, Ramp shaft Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 872 kg - Payload: 2,628 kg - Interior dimensions: 615 x 205 x 35 cm (L x W x H) - Overall exterior dimensions: 754 x 210 x 100 cm (L x W x H) - Loading sill height: approx. 60 cm - Tires: 195/50R13C - Brake: Yes - Support wheel: Yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Side walls: Anodized aluminium, double-walled - Side wall height: 35cm - Removable side walls: Four walls can be folded down - Side wall hinges: 6 on the side / 3 at the front + rear - Removable corner stanchions: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: KNOTT - Frame/chassis: V-drawbar - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 12 recessed inside - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Torsion-resistant side member chassis for safe driving characteristics - Many cross members for high point loading - Double-walled anodized aluminium drop sides - Drop sides can be folded on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, anti-slip and waterproof - corner stanchions with insertion option for attachments or grids - maintenance-free rubber spring axles - axle with continuous axle beam and independent wheel suspension - 12 lashing anchors recessed in the floor frame profile - recessed long lever locks - sturdy V-drawbar - maintenance-free rubber spring axle from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large reversing light - large parking brake - rear view mirror - large rear view mirror - large rear view mirror - large rear view mirror. plug - reversing lights - large safety lighting - lighting recessed in rear frame - integrated rear fog light - 13-pin plug - central jockey wheel - registration papers: vehicle registration document (ZBII) & COC papers Accessories can be retrofitted - please enquire: - perforated railing on dropside - high front grille - high tarpaulin - spare wheel - storage box - rear supports - ramps - flat tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. . New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dptj9Z

Overall weight: 3,500 kg, Empty load weight: 716 kg, Maximum load weight: 2,784 kg, Axe configuration: 2 axles, Loading space length: 4,200 mm, Loading space width: 204 mm, Loading space height: 40 mm, Color: silver, Condition: new, Construction height: 700 mm, Working width: 2,110 mm, Hydraulics, automatic reverse drive, drive-on ramps / parabolic suspension / cable winch, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. Drive-on ramps / parabolic suspension / cable winch TECHNICAL DATA - Make: Variant - Model: 3521 L4 - Vehicle type: Car transporter/construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 420 x 204 x 4 cm - External dimensions (LxWxH): 589 x 211 x 70 cm - Loading height of floor: 59 cm - Perm. Total weight: 3,500 kg - Unladen weight: 716 kg - Payload: 2,784 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic spring axle - Support wheel: Yes, reinforced - 100 km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 2 - Floor: Aluminium floor - Loading area: Closed loading area - Drop sides: Railing - Drop side height: 4 cm - Removable drop sides: - - Tipping / lowering function: None - Hydraulic pump: - - Battery loading function: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Wheel stopper: Optional, can be retrofitted - Cable winch & winch stand: Yes - Ramp shaft: Yes - Ramps/ramp flap: Yes - Ramp type: Single ramps - Ramp load: 4.000 kg - Drive-on angle: approx. 14 - Supports: Optional, retrofittable - Lashing eyes: 10 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Standard equipment: - Full aluminium floor, with anti-slip coating - Extremely stable welded frame - Cable winch with cable winch bracket standard - Cable winch removable and can be inserted on the left or right, as well as adjustable in length - Hole embossing in the outer frame profile for optional wheel stop bracket - Frame compl. hot-dip galvanized - drive-on ramps, reinforced ALU can be inserted under the loading area, L=250cm - very low chassis for low drive-on angle - 10x lashing eye mounted in the frame (500dAN/kg) - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - lockable coupling head - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - return driving license. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - lane departure lights at the rear - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - high tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 38 Sdacka0D2V

Overall weight: 3,500 kg, Empty load weight: 773 kg, Maximum load weight: 2,727 kg, Axe configuration: 2 axles, Loading space volume: 1.6 m³, Loading space length: 3,000 mm, Loading space width: 1,800 mm, Loading space height: 300 mm, Color: silver, Condition: new, Construction height: 1,700 mm, Working width: 2,320 mm, Spare wheel, automatic reverse drive, drive-on ramp, hot-dip galvanizing, rear ramp, parabolic suspension, bucket storage, *INSTANTLY AVAILABLE incl. Rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Make: Variant - Model: 3518 M3 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 300 x 180 x 30 cm - External dimensions (LxWxH): 498 x 232 x 170 cm - Loading height of floor: 38 cm - Perm. Total weight: 3,500 kg - Unladen weight: 773 kg - Payload: 2,727 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/60R12C - Chassis: KNOTT parabolic suspension - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted Vehicle body: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 6 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. 17 - Supports: integrated in tailgate - Lashing eyes: 16 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Standard equipment: - Reinforced aluminum checker plate mudguards, walkable - Side grid steps, non-slip - Screen-printed wooden floor 18mm non-slip and waterproof - Extremely stable welded tubular lattice frame - Frame completely hot-dip galvanized - Sturdy, welded tubular lattice frame - Sturdy, welded frame, hot-dip galvanized - Sturdy, sturdy, sturdy, sturdy, sturdy, sturdy, sturdy. hot-dip galvanized - steel drive-on flap standing on shaft 130cm - sturdy eccentric locks - support brackets on drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 6x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Uns Bke7Gk3Zccz

Axe configuration: 2 axles, Loading space length: 4,200 mm, Loading space width: 2,100 mm, Loading space height: 300 mm, Suspension: other, Color: silver, Condition: new, Gearing type: other, Driver cabin: other, Emission class: none, 9932246 Machine transporter and universal transporter - tandem with leaf springs The flexible and universally applicable all-rounder, Manufacturer: Variant, Type: 3521 L4, Internal dimensions loading area: 4200 X 2100 X 300 mm L.W.H., Overall dimensions: 5890 x 2111 x 700 mm L.W.H., Perm. total weight: 3500 kg, Payload: 2620 kg (payload specifications may vary depending on equipment and design), Unladen weight: 880 kg, Tandem, Non-slip aluminum floor, Loading height: 55 cm, Rail shaft, Two sturdy aluminum ramps 250 cm long, Stable edge for hanging the ramps prevents the ramps from slipping, Drive-on angle 13 °, Cable winch incl. Cable winch bracket, Cable winch bracket removable and can be plugged into the front wall on the right or left, Heavy-duty support wheel, 13-pin plug, Robust leaf springs, 6 lashing eyes per side, Lockable coupling head, Incl. vehicle documents, Possible options Vehicle documents, Possible options and accessories for this trailer:, Wheel shock absorber incl. 100 km/h certificate, Side wall extensions 350 mm, Tool box, Lashing eyes in the middle of the loading area, Spare wheel incl. holder, Anti-theft device, Registration of your new trailer at the road traffic office, We would be happy to show you how you can finance your new trailer in convenient monthly installments and provide you with an individual financing offer. We have more than 2,000 trailers permanently in stock. You can find a large number of our trailers online at Or you can visit us in Horn-Bad Meinberg - we look forward to seeing you! Illustrations may show accessories not included in the standard scope of delivery. Due to constant further developments, illustrations and technical data may vary slightly. Errors and changes excepted! Ekhexujm

Overall weight: 3,500 kg, Empty load weight: 945 kg, Maximum load weight: 2,555 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,680 mm, Loading space height: 350 mm, Color: silver, Condition: new, * AVAILABLE IMMEDIATELY * incl. electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Permissible total weight: 3,500 kg - Unladen weight: approx. 945 kg - Payload: approx. 2,555 kg - Interior dimensions: 320 x 168 x 35 cm (L x W x H) - Overall external dimensions: 475 x 186 x 120 cm (LxWxH) - Loading sill height: approx. 72 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled anodized aluminium, 4x folding & removable - Dropside height: 35cm - Chassis: High loader, KNOTT parabolic spring axle - Tipping function: Yes, three-sided - Hydraulics: Electric & tiltable with emergency hand - Tipping angle: approx. 45° / 47° - Hydraulic cylinder stages: 4 stages - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at extra cost - Lashing eyes: 8 pieces in the floor - Supports: at extra charge - Ramps: at extra cost - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Lifting flap can also be pivoted - Solid steel floor - extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many stable cross beams for high point loading - Additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - Built-in battery - Integrated battery charger and charge level indicator - Emergency hand pump fitted - Automatic reverse drive - Parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - Drive-on rail shaft as preparation for ramps - Sturdy angle lever locks - Very stable bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel - Registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - Grill attachment corrugated grille 60cm - Closed grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps Bvpdf2Go - Flat tarpaulin - Net hooks - Additional lashing eyes - reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV.

Overall weight: 3,500 kg, Empty load weight: 1,020 kg, Maximum load weight: 2,480 kg, Axe configuration: 2 axles, Loading space length: 3,610 mm, Loading space width: 1,850 mm, Loading space height: 350 mm, Color: silver, Condition: new, * AVAILABLE IMMEDIATELY * incl. electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Permissible total weight: 3,500 kg - Unladen weight: approx. 1,020 kg - Payload: approx. 2,480 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall external dimensions: 514 x 200 x 118 cm (LxWxH) - Loading sill height: approx. 72 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: optional! - incl. vehicle documents Bkhlatksa8M Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled anodized aluminium, 4x folding & removable - Dropside height: 35cm - Chassis: High loader, KNOTT parabolic spring axle - Tipping function: Yes, three-sided - Hydraulics: Electric & tiltable with emergency hand - Tipping angle: approx. 45° / 47° - Hydraulic cylinder stages: 4 stages - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at extra cost - Lashing eyes: 8 pieces in the floor - Supports: at extra charge - Ramps: at extra cost - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Lifting flap can also be pivoted - Solid steel floor - extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many stable cross beams for high point loading - Additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - Built-in battery - Integrated battery charger and charge level indicator - Emergency hand pump fitted - Automatic reverse drive - Parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - Drive-on rail shaft as preparation for ramps - Sturdy angle lever locks - Very stable bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel - Registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - Grill attachment corrugated grille 60cm - Closed grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Net hooks - Additional lashing eyes - reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV.

Mileage: 198,679 km, Power: 93 kW (126.44 HP), Fuel type: diesel, Gearing type: mechanical, Overall weight: 3,500 kg, First registration: 03/2013, Loading space length: 3,720 mm, Loading space width: 1,910 mm, Loading space height: 1,700 mm, Emission class: euro5, Color: white, Number of seats: 3, Condition: used, Equipment: Abs, Central Locking, Electronic Stability Program (Esp), Tail-Lift, 3-seater, power steering, 5-speed manual gearbox, rev counter, power steering, electric windows, on-board computer, electric exterior mirrors, driver's swing seat, center armrest, cruise control, twin tyres, large D-Hollandia tail lift with 750 kg payload, side door/right, Relec Froid TR 32 refrigeration unit, freezer, side protection, subject to errors+ prior sale+ typing errors. Dpsh2T Sale only to traders and export. !!!! Fg-1161 !!!!Key no.152 !!!!! Test drive to Tüv Dekra or Iveco Possible !!!!! With new TÜV on request !!!!

Overall weight: 3,500 kg, Empty load weight: 927 kg, Maximum load weight: 2,573 kg, Axe configuration: 2 axles, Loading space volume: 6.1 m³, Loading space length: 3,600 mm, Loading space width: 1,700 mm, Loading space height: 960 mm, Color: silver, Condition: new, Construction height: 2,100 mm, Working width: 2,300 mm, Automatic reverse drive, hot-dip galvanizing, grid attachment / heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / electric wheel, * IMMEDIATELY AVAILABLE * incl. Grid attachment / heavy-duty ramp / extremely robust body / multifunctional use / LED lighting / e-wheel TECHNICAL DATA - Make: Brian James - Model: General Plant - Vehicle type: Construction machinery - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 360 x 170 x 96 cm - External dimensions (LxWxH): 529 x 230 x 210 cm - Loading height of floor: 48 cm - Perm. Total weight: 3,500 kg - Unladen weight: 927 kg - Payload: 2.573 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/70R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Universal all-rounder construction machinery trailer - Unique on the market - Every available option can be flexibly attached or removed and thus enables customization for almost any area of application - Insertion option at all 4 corners for drop sides, tarpaulin frames, side wall extensions or front wall elevation - Steel side wall extension - 50% lattice extension + 50% closed side wall, can be removed without tools - Incl. recessed eccentric locks - hard-wearing rubber strip seals the attachment to the dropside at the bottom - vehicle also intended for all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, other ramps, attachments, etc. can be retrofitted at any time - robust steel mudguards with non-slip perforated profile - reinforced 18 mm screen-printed wooden floor, non-slip and waterproof - very sturdy welded steel frame - frame completely hot-dip galvanized - chassis with additional longitudinal beam underneath the loading area - sturdy, sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area - sturdy chassis with additional longitudinal beam underneath the loading area.stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise - heavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - very low chassis for low drive-on angle - lashing points at the bottom and top of the dropside (1000dAN/kg) TÜV certified - side panels color: black - maintenance-free axles and damping systems designed for long journeys and heavy loads - spare wheel mounted on the dropside for easy access - automatic reverse drive - ALKO overrun device and parking brake - cast steel coupling head with integrated ALKO high-security lock - very sturdy V-drawbar REINFORCED - 13-pin plug - complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Automatic heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket support - Tipping hydraulics - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over Oqi8Gjcz

Overall weight: 3,500 kg, Empty load weight: 826 kg, Maximum load weight: 2,674 kg, Axe configuration: 2 axles, Loading space volume: 1.3 m³, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanized, incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * INCL. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of the floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 826 kg - Payload: 2.674 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready to drive off within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the dropside for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloe Opleqwsp

Overall weight: 3,500 kg, Empty load weight: 781 kg, Maximum load weight: 2,719 kg, Axe configuration: 2 axles, Loading space volume: 1.3 m³, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanized, incl. TracStrap load securing / individual ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / individual ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket tray, * INCL. TracStrap load securing / single ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of the floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2.719 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready to drive off within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the dropside for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, o Oonk2Ecf

Overall weight: 3,500 kg, Empty load weight: 776 kg, Maximum load weight: 2,724 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.3 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Floor loading height: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 776 kg - Payload: 2.724 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bok7Vx7Yc0A

Overall weight: 3,500 kg, Empty load weight: 731 kg, Maximum load weight: 2,769 kg, Axe configuration: 2 axles, Loading space volume: 1.1 m³, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, Hot-dip galvanizing, Heavy-duty ramp, Extremely robust body, Hole lashing floor, LED lighting, E-wheel, Bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / Extremely robust body / Hole lashing floor / LED lighting / E-wheel / Bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - S2Nv7Inpi

Overall weight: 3,500 kg, Empty load weight: 731 kg, Maximum load weight: 2,769 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.3 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, extremely robust body, hole lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely robust body / hole lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of the floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bj7Ijilksnd

Overall weight: 3,500 kg, Empty load weight: 736 kg, Maximum load weight: 2,764 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.1 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 736 kg - Payload: 2.764 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x tension belts (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Bkf097P7T0Y