Low loader

Brian James DIGGER PLANT 543-3717-35-2-12 370X170CM 3500KG

Overall weight: 3,500 kg, Empty load weight: 826 kg, Maximum load weight: 2,674 kg, Axe configuration: 2 axles, Loading space volume: 1.3 m³, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanized, incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * INCL. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of the floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 826 kg - Payload: 2.674 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready to drive off within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the dropside for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloe Opleqwsp

Overall weight: 3,500 kg, Empty load weight: 776 kg, Maximum load weight: 2,724 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.3 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Floor loading height: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 776 kg - Payload: 2.724 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bok7Vx7Yc0A

Overall weight: 3,500 kg, Empty load weight: 731 kg, Maximum load weight: 2,769 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.3 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, extremely robust body, hole lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely robust body / hole lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of the floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bj7Ijilksnd

Overall weight: 3,500 kg, Maximum load weight: 2,736 kg, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Year of construction: 2024, Condition: new, ANHÄNGERWIRTZ the online pick-up market for your new trailer not only offers strong brands. over 700 new trailers in stock over 100 used trailers always on offer over 150 vehicle transporters - common designs with extensive accessories in stock Brw0Vkd0Jo non-binding example: Brian James directly & cheaply available after order BRIAN JAMES DIGGER PLANT 543-3717-35-2 370X170CM 3500KG RAMPS SPARE WHEEL 2736KG PAYLOAD Machine transporter Cargo Digger Plant 543-3717-35-2-12 370x170x15cm 3500kg spare wheel Tandem low loader V chassis - overrun brakes - 12" tyres - loading platform height 38cm - galvanized steel body with perforated steel floor, DIN lashing bracket - bucket storage mounted - steel drive-on ramps foldable sliding, lockable ball coupling, reinforced support wheel..... Sales telephone order acceptance Opening hours: MO. - FR 08.00 to 12.30 and 14.00 to 18.00 UHR or around the clock via our online store on trailershop Pictures and description of this advertisement are protected by copyright - logos protected by trademark law 07/24 543-2320

Overall weight: 3,500 kg, Empty load weight: 731 kg, Maximum load weight: 2,769 kg, Axe configuration: 2 axles, Loading space volume: 1.1 m³, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, Hot-dip galvanizing, Heavy-duty ramp, Extremely robust body, Hole lashing floor, LED lighting, E-wheel, Bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / Extremely robust body / Hole lashing floor / LED lighting / E-wheel / Bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - S2Nv7Inpi

Overall weight: 3,500 kg, Empty load weight: 712 kg, Maximum load weight: 2,788 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Color: other, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3717-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2788 kg Unladen weight: 712 kg Box dimensions: 3700 x 1700 mm Tyres: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator shovel tray incl. spare wheel Spare wheel - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Bnuxov2Fvac

Overall weight: 3,500 kg, Empty load weight: 736 kg, Maximum load weight: 2,764 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.1 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 736 kg - Payload: 2.764 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x tension belts (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Bkf097P7T0Y

Overall weight: 3,500 kg, Empty load weight: 712 kg, Maximum load weight: 2,788 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Condition: new, Machine/vehicle number: BJT-543-3717-35-2-12-2024, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3717-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2788 kg Unladen weight: 712 kg Box dimensions: 3700 x 1700 mm Tyres: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator shovel tray incl. spare wheel Spare wheel - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Cfgyrhhx

Overall weight: 3,500 kg, Empty load weight: 781 kg, Maximum load weight: 2,719 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Loading space volume: 1.1 m³, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, heavy-duty ramp, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Total weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2.719 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. Do0Lwz

Overall weight: 3,500 kg, Empty load weight: 686 kg, Maximum load weight: 2,814 kg, Axe configuration: 2 axles, Loading space volume: 1.1 m³, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, extremely robust body, hole lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely robust body / hole lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 686 kg - Payload: 2.814 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nney8Kqckt

Overall weight: 3,500 kg, Empty load weight: 614 kg, Maximum load weight: 2,886 kg, Axe configuration: 2 axles, Loading space volume: 0.7 m³, Loading space length: 2,800 mm, Loading space width: 1,300 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2.886 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing light - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - E2Nibei

Overall weight: 3,500 kg, Empty load weight: 859 kg, Maximum load weight: 2,641 kg, Axe configuration: 2 axles, Loading space length: 3,700 mm, Loading space width: 1,700 mm, Year of construction: 2024, Condition: new, Mileage: 50 km, Gearing type: mechanical, Energy efficiency: A, Brian James Digger Plant 543-3717-35-2-12 Construction machinery trailers / construction machinery transporters Car trailer Age: New (year of production: 2024) 2 years main inspection from the date of first registration Incl. registration documents (vehicle registration certificate / registration certificate part 2 and COC) Available from: Immediately (in stock)! Financing possible via our partner banks! Technical data Permissible total weight: 3,500kg Unladen weight: approx. 859kg Payload: approx. 2,641kg Number of axles: 2 Load compartment length: 3,700mm Load compartment width: 1,700mm Brake type: Braked, overrun brake Chassis: Low loader (wheels next to body), rubber suspension axles Electrics: 12V, 13-pin plug Tire size: 195/60 R12 Dpn8Tx Equipment Certified load securing TracStrap system Full-width heavy-duty loading ramp made of perforated steel Excavator bucket storage Spare wheel incl. holder Perforated stand rails Wooden floor panel between the perforated stand rails LED lighting Side tread plates Sliding ramps 1.62m Heavy duty support wheel Welded and galvanized frame V-drawbar AL-KO axles and brake system Accessories (subject to surcharge) 100km/h certificate incl. retrofitting 4x wheel shock absorbers Trailer lock Access ramp with integrated rails Excavator arm safety device Excavator bucket cage Wheel/chain locking bar Tire pressure monitoring system Full-width heavy-duty loading ramp made of perforated steel Cable winch (manual or electric) Tensioning strap TracStrap securing system Portable 'Power Pack' incl. charger for electric cable winch Warning markings on the ramps Certified load securing TracStrap system Towing eye Vehicle delivery throughout Germany Registration throughout Germany Transfer license plate (valid for 5 days) Please note Weight specifications may vary depending on equipment, errors, prior sale and changes reserved! Condition, drivability: roadworthy, warranty: vehicle warranty from manufacturer

Overall weight: 2,700 kg, Empty load weight: 557 kg, Maximum load weight: 2,143 kg, Axe configuration: 2 axles, Loading space volume: 0.7 m³, Loading space length: 2,800 mm, Loading space width: 1,300 mm, Loading space height: 200 mm, Color: silver, Condition: new, Construction height: 1,970 mm, Working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Total weight: 2,700 kg - Unladen weight: 557 kg - Payload: 2.143 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing lights - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cltxvgwbzy

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Color: other, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. spare wheel incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. Excavator bucket storage - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip, non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Ck3Sxnme

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Color: other, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. spare wheel incl. TrackStrap system incl. excavator arm lock incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. Excavator bucket storage - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Burkrreu

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Color: other, Condition: new, Construction height: 1,970 mm, Working width: 2,320 mm, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. TrackStrap system incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator bucket tray incl. Spare wheel excavator arm lock is optionally available - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar immersion bath hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area due to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Cfjyv8Ki

Overall weight: 2,910 kg, Empty load weight: 590 kg, Maximum load weight: 590 kg, Axe configuration: 2 axles, Loading space length: 2,800 mm, Loading space width: 1,300 mm, Color: other, Condition: new, Construction height: 1,950 mm, Working width: 1,790 mm, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-2813-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2910 kg Unladen weight: 590 kg Box dimensions: 2800 x 1300 mm Tyres: 195 60 R12 Loading height: 380 mm Drive-on angle 13 degrees incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator bucket storage incl. spare wheel Spare wheel - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Bgsjn2P8

Overall weight: 2,910 kg, Empty load weight: 590 kg, Maximum load weight: 590 kg, Axe configuration: 2 axles, Loading space length: 2,800 mm, Loading space width: 1,300 mm, Condition: new, Machine/vehicle number: BJT-543-2813-35-2-12-2024, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-2813-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2910 kg Unladen weight: 590 kg Box dimensions: 2800 x 1300 mm Tyres: 195 60 R12 Loading height: 380 mm Drive-on angle 13 degrees incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator bucket storage incl. spare wheel Spare wheel - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Ccat09C

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Condition: new, Machine/vehicle number: BJT-543-3217-35-2-12-Sich, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. spare wheel incl. TrackStrap system incl. excavator arm lock incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. Excavator bucket storage - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty Blkkgztqcpu

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Condition: new, Machine/vehicle number: BJT-543-3217-35-2-12-2024, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. spare wheel incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. Excavator bucket storage - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area thanks to reinforced frame construction - 18 mm wooden floor with non-slip, non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty H8Unda9O

Overall weight: 3,500 kg, Empty load weight: 682 kg, Maximum load weight: 2,818 kg, Axe configuration: 2 axles, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Condition: new, Machine/vehicle number: BJT-543-3217-35-2-12--TrS, Manufacturer: Brian James Trailers Type: Construction machinery trailer Cargo Digger Plant 2, 543-3217-35-2-12 Perm. total weight: 3500 kg, 2-axle Payload: 2818 kg Unladen weight: 682 kg Box dimensions: 3200 x 1700 mm Tires: 195 60 R12 Loading height: 400 mm Drive-on angle 14 degrees incl. TrackStrap system incl. reinforced loading area, heavy-duty incl. adjustable perforated steel ramps incl. excavator bucket tray incl. Spare wheel excavator arm lock is optionally available - Equipment as required, modification as required - Many lashing options - Net hooks on the underside - V-drawbar immersion bath hot-dip galvanized - 13-pin plug and reversing light - Support wheel - Heavy-duty loading area due to reinforced frame construction - 18 mm wooden floor with non-slip surface - Heavy-duty chassis from ALKO with sealed wheel bearings - 5-year chassis warranty Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber suspension axle, drive-on ramp, support wheel, marker lights, hot-dip galvanizing, braked, incl. warranty, equipment as required, modification after request. Warranty, Equipment as required, Modification as required, Many lashing options, Net hooks on the underside, V-drawbar hot-dip galvanized, 13-pin plug and reversing light, Load-bearing loading area thanks to reinforced frame construction, 18 mm wooden floor with non-slip surface, Heavy-duty chassis from ALKO with sealed wheel bearings, 5-year chassis warranty D3Lc3Bwxf

Overall weight: 3,500 kg, Maximum load weight: 2,753 kg, Loading space length: 3,200 mm, Loading space width: 1,700 mm, Year of construction: 2024, Condition: new, buy online at trailer-shop. de Many models available online at ANHÄNGERWIRTZ Buy conveniently and around the clock online 24/7 Pick it up yourself or have it delivered 😊 The online pick-up market for your new trailer offers strong brands! Over 700 new trailers in stock over 130 used trailers always on offer. Uduopjpsmx non-binding example: various versions available Machine transporter Digger Plant 543-3217-35-2-12 320x170x15cm 3500kg Tandem low loader V chassis - overrun brakes - 12" tyres - loading area height 38cm - galvanized steel trough with perforated steel floor, DIN lashing bracket - bucket storage mounted - loading ramp full width steel foldable and support bracket with lifting aid, spare wheel mounted, lockable ball coupling, reinforced support wheel..... Invoice with VAT / warranty - Trailer dealer for over 32 years 09/24 543-1320Ramp

Overall weight: 3,500 kg, Empty load weight: 775 kg, Maximum load weight: 2,725 kg, Axe configuration: 2 axles, Loading space length: 4,500 mm, Loading space width: 2,130 mm, Color: black, Condition: new, Construction height: 800 mm, Working width: 2,150 mm, Automatic reverse drive, Drive-on ramp, Tiltable loading area, Hot-dip galvanizing, Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor, * IMMEDIATELY AVAILABLE * Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor TECHNICAL DATA - Make: Brian James - Model: Connect 476 - Vehicle type: High loader - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 450 x 213 x 0 cm - External dimensions (L x W x H): 620 x 215 x 80 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 775 kg - Payload: 2,725 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Most adaptable multifunctional trailer for commercial goods and vehicle transport of all kinds. - Every available option can be flexibly attached or detached and thus enables customization for almost any application - Perforated steel lashing floor in combination with 18 mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Can be fitted at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, ramps etc. can be retrofitted at any time. can be retrofitted at any time - very stable welded steel frame - contact edge for drive-on ramps can be moved for different track widths - numerous lashing points punched directly into the frame enable professional load securing - integrated ramp shafts for easy retrofitting of drive-on ramps - side panels color: black - frame cpl. Sturdy net hooks under the loading area - Spare wheel mounted on the drawbar for easy access - Automatic reversing - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Tipping function - Ramps - Supports - Storage box - Drop sides - Drive-on flap - Winches - Attachments We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cifklciy3

Overall weight: 3,500 kg, Empty load weight: 745 kg, Maximum load weight: 2,755 kg, Axe configuration: 2 axles, Loading space length: 4,000 mm, Loading space width: 2,130 mm, Color: black, Condition: new, Construction height: 800 mm, Working width: 2,150 mm, Automatic reverse drive, Drive-on ramp, Tiltable loading area, Hot-dip galvanizing, Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor, * IMMEDIATELY AVAILABLE * Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor TECHNICAL DATA - Make: Brian James - Model: Connect 476 - Vehicle type: High loader - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 400 x 213 x 0 cm - External dimensions (L x W x H): 597 x 215 x 80 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 745 kg - Payload: 2,755 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Most adaptable multifunctional trailer for commercial goods and vehicle transport of all kinds. - Every available option can be flexibly attached or detached and thus enables customization for almost any application - Perforated steel lashing floor in combination with 18 mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Can be plugged in at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, ramps etc. can be retrofitted at any time. can be retrofitted at any time - very stable welded steel frame - contact edge for drive-on ramps can be moved for different track widths - numerous lashing points punched directly into the frame enable professional load securing - integrated ramp shafts for easy retrofitting of drive-on ramps - side panels color: black - frame cpl. Sturdy net hooks under the loading area - Spare wheel mounted on the drawbar for easy access - Automatic reversing - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Tipping function - Ramps - Supports - Storage box - Drop sides - Drive-on flap - Winches - Attachments We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Dptkax

Overall weight: 3,500 kg, Empty load weight: 805 kg, Maximum load weight: 2,695 kg, Axe configuration: 2 axles, Loading space length: 5,000 mm, Loading space width: 2,130 mm, Color: black, Condition: new, Construction height: 800 mm, Working width: 2,150 mm, Automatic reverse drive, Drive-on ramp, Tiltable loading area, Hot-dip galvanizing, Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor, * IMMEDIATELY AVAILABLE * Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor TECHNICAL DATA - Make: Brian James - Model: Connect 476 - Vehicle type: High loader - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 500 x 213 x 0 cm - External dimensions (L x W x H): 665 x 215 x 80 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 805 kg - Payload: 2,695 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Most adaptable multifunctional trailer for commercial goods and vehicle transport of all kinds. - Every available option can be flexibly attached or detached and thus enables customization for almost any application - Perforated steel lashing floor in combination with 18 mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Can be plugged in at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, ramps etc. can be retrofitted at any time. can be retrofitted at any time - very stable welded steel frame - contact edge for drive-on ramps can be moved for different track widths - numerous lashing points punched directly into the frame enable professional load securing - integrated ramp shafts for easy retrofitting of drive-on ramps - side panels color: black - frame cpl. Sturdy net hooks under the loading area - Spare wheel mounted on the drawbar for easy access - Automatic reversing - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Tipping function - Ramps - Supports - Storage box - Drop sides - Drive-on flap - Winches - Attachments New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Cigiex2Jg