Platform open

Fliegl SDS 390 Roadrunner

Overall weight: 35,000 kg, maximum load weight: 30,510 kg, axe configuration: 3 axles, first registration: 03/2016, next inspection (TÜV): 04/2023, Condition: used, Load securing certificate (DIN EN 12641 XL) incl. DC9.5 floor broken at the rear! Pallet box for 30 Euro pallets, spare wheel holder, 2 x plastic tool box with drawer and shelf, autom. Lift axle, floor for 7.1t forklift axle load, pallet stop, ADR approval FL/AT ADR warning sign, side LED lighting, additional rear LED spotlight, EBS, ALU insertion slats, Edscha interior length: 13650mm interior width: 2480mm front side loading height: 2650mm rear side loading height: 2700mm front interior height: 2740mm rear interior height: 2790mm Gi2A89J

Overall weight: 35,000 kg, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, axe configuration: 3 axles, first registration: 10/2015, tire size: 385/65 r22.5, Condition: used, machine/vehicle number: bf996c16c980c5f73a19d37b8, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 king pins, outer frame slightly slanted with load-lock profile for attaching tensioning straps Note! To attach the straps in conjunction with drop sides, the drop sides must be opened, 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, door locks on the side, wheel chocks with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm). Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, quarter-shell mudguards in front of and behind axle unit, with anti-spray flaps only on last axle, impact protection at rear, pallet stop on both sides approx. 20 - 25 mm high, in bolted version, loading height reduced by approx. 20 - 25 mm BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (with starting aid up to max. 25 km/h) 2-line compressed air brake system, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic braking system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lifting & lowering valve, vehicle stability system 24 volt, multi-chamber lights, amber LED lighting at the side, amber LED lighting at the side with 20 LED diodes per light, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED safelight, at the top of the rear corner stanchions, 2 additional LED work lights at the rear, switched via reversing light Floor: Screen printing plates approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead/front stanchions: 2,480 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, bottom inside at approx. 140 mm height with steel impact protection Middle stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions, aluminum insertion slats Rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors (heavy dents), 2-leaf with 2 internal espagnolette locks each Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners, customer lettering on side tarpaulins and rear portal, as digital print Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm at each corner stanchion using a hand pump. Mobile with raised lifting roof, can be adjusted upwards by 4 x 50 mm. Note overall height! Incl. tarpaulin extension by 200 mm, only in conjunction with tarpaulin. Sft8H Approval country: Germany, test approval according to EC 2007/46, load securing certificate according to EN 12642 XL (only valid in combination with 4 rows of aluminum slats), additional beverage c

Overall weight: 31,000 kg, maximum load weight: 24,200 kg, axe configuration: 2 axles, loading space length: 13,850 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 04/2018, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 93 cbm, double wing door with espagnolette lock at rear, access and standing area at front of body, roller tarpaulin, "Cargo Floor" floor with 21 boards 10 mm, stainless steel wear plate at rear under moving floor, 12 lashing eyes per side, complete emptying (moving bulkhead), push-in and push-out function, loading pressure gauge, hinged rear light protection, cable control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, support winches, 1x storage box, can be fitted with advertising and/or labeled. Rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, landing gear, 1x storage box, vehicle can be fitted with advertising and/or lettering C90Rrri Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Axe configuration: 3 axles, color: grey-black, Condition: new, Color natural, lift axle, electronic brake system EBS, connection plug 1x15 pole, equipment outer frame slightly inclined new design with "Load-Lock-Profile" for lashing strap attachment 13 pairs of lashing eyes additionally in the outer frame, each 5to 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight steel forklift ram protection on the side and rear of the outer frame 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic toolbox 650mmx520mmx670mm 7 pairs of stake pockets embedded in the outer frame, 83 x 83 mm SAF disc brake axles with 430 mm air suspension 1. Axle automatic lift axle, including forced lowering and starting aid, actuation 3x brakes Wheels and tires 6 385/65 R22.5" brand 6 steel rims, factory silver Floor Screen printing plates approx. 30 mm thick, cross joints with omega insert, for high point load capacity for forklift axle load up to max. 7 100 kg Front end wall / corner posts front 25 mm aluminium hollow profile, 1 950 mm high, corner posts steel in volume design + 2 middle supports "Crash-Blocker", bottom inside at approx. 140 mm height Drop sides 25 mm aluminium hollow profile, 700 mm high Paintwork Frame hot-dip galvanized incl. passivation "15-year warranty against rusting through" Drop sides ALU anodized, errors and omissions excepted. Bfuvyz3Ch

Overall weight: 35,000 kg, axe configuration: 3 axles, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, first registration: 02/2017, next inspection (TÜV): 03/2024, Condition: used, Equipment: ABS, * Lift axle * ALU troughs * BPW axles Bli3Z79Rxie * Disc brakes * Air suspension * Coil body * Edscha soft top * Tare weight: 6,214 kg * SP: 09.2024 ----Internal vehicle number: 9225----Errors and omissions excepted.

Overall weight: 35,000 kg, axe configuration: 3 axles, first registration: 03/2015, Condition: used, Equipment: ABS, Fliegl walking floor Walkingfloor * EZ 06.03.2015 * 3 axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires/Tyres: * 1st axle 385/55 R 22.5 f.l 8 mm & f.r 11 mm * 2nd axle 385/55 R 22.5 f.m.l 10 mm & f.m.r 11mm * 3rd axle 385/55 R 22.5 h.l 10 mm & h.r 9 mm * German trailer / German Semitrailer * 1 Fahrzeughalter / 1 Owner * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki Bjiwkhvl * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Overall weight: 35,000 kg, maximum load weight: 28,300 kg, axe configuration: 3 axles, loading space length: 9,200 mm, loading space height: 900 mm, Condition: new, total width: 2,550 mm, total height: 2,488 mm, Unladen weight: 6,700kg Overall length: 13,800mm Loading length: 9,200mm Loading height: 900mm Further information - Frame painted 7350 nova gray - twin tires 235/75 R17.5 - with "Load-Lock-Profile" for tension belt attachment - 24 to. 2-speed support winch Dh0Qhlyl2 - Aluminum side bumper - Steel underride guard - Plastic toolbox - Air suspension - with lifting & lowering valve - 2x7-pin and 1x15-pin front sockets plus pre-freight / provision from Wiesmoor storage location ¤ 1,280.00/ net

Overall weight: 35,000 kg, axe configuration: 3 axles, tire size: 385/65 r22.5, Condition: new, machine/vehicle number: 2dee9cc4124b79c4820f5c3cf, Further information Fine-grained steel welded construction, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, door stop at the side, 2 wheel chocks with holder, Aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of and behind axle unit, with anti-spray flaps in accordance with EC, impact protection at the rear SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 385/65 R22.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable, Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: tarpaulin with welded horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be slid from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulins at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on the drop sides), reflective strips: red, all-round on the rear portal Frame DB 7350 nova grey, 10-year warranty against rusting through, support legs coated black, front corner stanchions hot-dip galvanized, front wall aluminium, rear corner Bsb0K3M8

Overall weight: 31,000 kg, maximum load weight: 24,200 kg, axe configuration: 2 axles, loading space length: 13,170 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 04/2018, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cbm, double wing door with espagnolette lock at rear, access and standing area at front of body, roller tarpaulin, "Cargo Floor" floor with 21 boards 10 mm, stainless steel wear plate at rear under moving floor, 12 lashing eyes per side, complete emptying (moving bulkhead), push-in and push-out function, loading pressure gauge, hinged rear light protection, cable control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, support winches, 1x storage box, can be fitted with advertising and/or labeled. Rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, landing gear, 1x storage box, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Dppq8B Please contact us!

Axe configuration: 3 axles, tire size: 435/50 r19.5, Condition: new, machine/vehicle number: 8e6cf81e11b107f23f22f209a, Further information Fine-grained steel welded construction, with preload slight pretension in the neck area, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, lateral door stop, 2 wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps according to EC, impact protection at the rear SAF disc brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption, air suspension Clfsoj3Umz 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 435/50 R19.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for car industry, internal width between the roof rails, approx. 2 490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, 3 driving positions at the front: interior height at the front approx. 2900 mm/ 2950 mm / 3000 mm, adjusted to approx. 3000 mm Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on

Overall weight: 38,000 kg, maximum load weight: 30,670 kg, axe configuration: 3 axles, loading space length: 13,850 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 05/2019, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cbm, double wing door with espagnolette lock at rear, access and standing area at front of body, roller tarpaulin, "Cargo Floor" floor with 21 boards 10 mm, stainless steel wear plate at rear under moving floor, 12 lashing eyes per side, complete emptying (moving bulkhead), push-in and push-out function, loading pressure gauge, hinged rear light protection, cable control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, support winches, 1x storage box, can have advertising stuck on and/or labeled. Rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, landing gear, 1x storage box, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Cvcjwg3Ooq

Overall weight: 35,000 kg, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, axe configuration: 3 axles, tire size: 385/65 r 22,5, Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Gc2Mbbv Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Overall weight: 38,000 kg, maximum load weight: 30,080 kg, axe configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 05/2022, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, Cargo-Floor floor with 21 boards 8 mm, complete emptying (moving bulkhead), push-in and push-out function, loading gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roller tarpaulin, service door at the front, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces. front on body, roller tarpaulin, front service door, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces, stainless steel wear plate rear under sliding floor, ABS, EBS, SAF axle(s), disc brakes, air suspension w. lifting/lowering device HA, support winch(es), storage box, closed side collision protection, vehicle can be covered with advertising and/or labeled Do3Een Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 35,000 kg, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, axe configuration: 3 axles, tire size: 385/55 r22.5, Condition: new, machine/vehicle number: 6650f95fd39bb5625662ee336, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Clfqtjt0Ot Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Overall weight: 38,000 kg, maximum load weight: 30,290 kg, axe configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,755 mm, loading space volume: 92 m³, first registration: 01/2021, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Rear light guard, cable remote control, ABS, EBS, SAF INTRA axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, landing gear, 1x storage box, spare wheel holder, vehicle can be fitted with advertising and/or lettering B9Cyxmxrec Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 35,000 kg, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, axe configuration: 3 axles, tire size: 385/55 r22.5, Condition: new, machine/vehicle number: 562ca26c733cc91276e95b716, Further information Chassis saddle forwarding Fine-grained steel welded construction in lightweight design, up to the support legs, saddle plate with replaceable 2 king pins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Door retainer on the side 2 wheel chocks with holder Aluminum side bumper Steel underride guard with wide Fliegl mud flaps Folding guard plate for light unit Quarter-shell mudguards Impact protection at the rear Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin pole with bracket 1 plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 spare wheel holder for 1 e-wheel, with wheel fastening set Axles+suspension SAF disc brake axles with 430 mm disk diameter Sxfems Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/55 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulics. Forward/reverse travel is switched electrically via remote control with cable. -Moving floor Power supply via parking light Hydraulic actuation via truck power take-off Hydraulic connection with hose to front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump capacity: Liter capacity: 110 ltr/min Pressure: 250 bar Oil tank filling min: 100 ltr SB floor Sliding floor with wear plate at the rear Aluminum floor boards, 8 mm floor profile, ribbed design SB Trough Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of hollow aluminum profiles, welded together all round at the top with a wide special aluminum reinforcement profile, welded in at the bottom with a special frame. Sliding wall for better emptying of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of hollow aluminum profiles, as a 2-leaf door, with 1/2 to 1/2 division, framed all round with a special U-profile with stop and rubber seal, with 2 external espagnolette locks, locked at the top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in the direction of travel. With swivel crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the left/right direction of travel and railing for opening the door.

Overall weight: 35,000 kg, maximum load weight: 27,090 kg, axe configuration: 3 axles, loading space length: 14,750 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 100 m³, first registration: 05/2022, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 100 cbm, long truck type 1, Cargo-Floor floor w. 21 boards 8 mm, complete emptying (moving bulkhead), push-in and push-out function, loading gauge, double wing door w. espagnolette lock at the rear, access and standing area at the front of the body, roller tarpaulin, service door at the front, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), stainless steel wear plate at the rear under the moving floor front on body, roller tarpaulin, front service door, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), stainless steel rear wear plate under sliding floor, ABS, EBS, SAF INTRA axle(s), disc brakes, air suspension with lifting and lowering device HA, SAF support winches, storage box, vehicle can be covered with advertising and/or labeled. Uxfpr9J8D9 Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 35 kg, empty load weight: 6 kg, maximum load weight: 28 kg, axe configuration: 3 axles, tire size: 435/50 r19,5, Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Cngytwjsq Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Overall weight: 38,000 kg, maximum load weight: 30,080 kg, axe configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 07/2022, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, Cargo-Floor floor with 21 boards 8 mm, complete emptying (moving bulkhead), push-in and push-out function, loading gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roller tarpaulin, service door at the front, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces. front on body, roller tarpaulin, front service door, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces, stainless steel wear plate rear under sliding floor, ABS, EBS, SAF axle(s), disc brakes, air suspension w. lifting/lowering device HA, support winch(es), storage box, closed side collision protection, vehicle can be covered with advertising and/or labeled Cccoya8 Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Overall weight: 39,000 kg, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, axe configuration: 3 axles, tire size: 385/65 r22.5, Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Cxsexwn Available immediately!

Overall weight: 38,000 kg, maximum load weight: 30,090 kg, axe configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 07/2022, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, ALU wear plates inside (wedge-shaped), Cargo-Floor floor with 21 boards 8 mm, complete emptying (moving bulkhead), push-in and push-out function, loading gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roller tarpaulin, service door at the front, side wall protection tarpaulin, ALU wear strips on the end pieces, ABS, EBS, SAF axle(s), disk brakes front standing area on body, roller tarpaulin, front service door, side wall protection tarpaulin, ALU wear strips on the end pieces, ABS, EBS, SAF axle(s), disc brakes, air suspension w. lifting/lowering device HA, lift axle, support winch(es), storage box, closed side collision protection, vehicle can be covered with advertising and/or labeled Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Carydpd7

Overall weight: 35 kg, empty load weight: 5 kg, maximum load weight: 29,045 kg, axe configuration: 3 axles, tire size: 385/65 r22.5, Condition: new, machine/vehicle number: d9c951d746f03c05bc5470f89, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Vario stanchion system 4 pairs embedded in loading area, can be pushed together to 2 100 mm and extended to approx. 3 500 mm for loading. Stanchions can be locked every 100 mm on an internal width of 2 100 mm to 3 000 mm, 4 pairs of divisible stanchions 600 mm + 1 200 mm, total height 1 800 mm removable. With an internal stanchion width from approx. 2 350 mm, excess width. Vario end walls Floor prepared for inserting 3 end walls. 4 x 5 pairs of Vario stanchion pockets for insertable end walls (front and rear) and 1 x 3 pairs in the middle for transporting 2 x 5,000 mm or 2 x 6,000 mm construction steel mats. 2 Vario end walls, each consisting of 1 pair of plug-in stanchions and 1 top crossbeam approx. 2200 mm wide. Cross beams can be extended by 220 mm on both sides, with lashing hole for tensioning. 1900 mm high Vario bulkhead, can be converted to 1300 mm or 700 mm high. 4 stanchion pockets embedded in the center of the floor for 80 x 80 mm stanchions 1 pair of supports at the bottom for Vario bulkhead at the front 1 pair of lower supports for rear Vario bulkhead Slightly slanted outer frame with Load-Lock profile for lashing strap attachment 14 pairs of lashing eyes additionally embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Wheel chocks with holder Aluminium side collision protection Galvanized steel underride guard Quarter-shell mudguards in front of and behind axle unit with anti-spray flaps on last axle only Impact protection at the rear 8 construction steel winches with wire rope and counter hooks, 4 x left and 4 x right with rope feed-through through the outer frame, 1 removable slip-on gearbox for construction steel winches - supplied loose (without bracket on the frame) 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Fz7Iyix Attention: The trailer may only be to

Overall weight: 38,000 kg, maximum load weight: 30,800 kg, axe configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 03/2022, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, Cargo-Floor floor with 21 boards 8 mm, complete emptying (moving bulkhead), push-in and push-out function, loading gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roller tarpaulin, service door at the front, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces. front on body, roller tarpaulin, front service door, side wall protection tarpaulin, ALU wear plates inside (wedge-shaped), ALU wear strips on the end pieces, stainless steel wear plate rear under sliding floor, ABS, EBS, SAF axle(s), disc brakes, air suspension w. lifting/lowering device HA, support winch(es), storage box, closed side collision protection, vehicle can be covered with advertising and/or labeled Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Ccbtbnc

Overall weight: 35,000 kg, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, axe configuration: 3 axles, first registration: 02/2020, tire size: 445/45 r19,5, Condition: used, machine/vehicle number: 41b5b53ab0b527fda1f0f26fe, Further information The pictures are archive pictures, the vehicle may still be in use! Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins PRO SLIDE, additional front skid plate for protection when saddling up Slightly angled outer frame with Load-Lock profile for attaching tensioning straps Note! To attach the straps in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Note: Free support leg corner dimension or free swing radius to the rear approx. 1930 mm 1 pair of gear support legs at the rear, with straight lower section and single-sided operation in FR right Pull-out ladder at the rear Side door retainer Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray flaps behind each axle Heavy blocker rear transverse bumper + side roller bumpers Heavy-duty pallet stop bolted on both sides, approx. 15 - 20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15 - 20 mm Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Storage compartment for 16 insertable slats, one-sided in FR-left, below loading area Axles+suspension BPW disk brake axles with 370 mm disk diameter, Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Rear loading height approx. 1200 mm when raised (air suspension on truck lowered to approx. 910 mm semi-mounted height) without lift axle Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-applied parking brake Duomatic connection at the front, without connecting cable EBS make Wabco-E, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Wabco ramp starting aid, TailGUARD with 3 ultrasonic sensors at the rear of the vehicle Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable Reversing camera system with color flat screen monitor, with wireless connection to the screen, screen with suction cup mount and power supply via 24 volt vehicle socket Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Rear area with heavy-duty floor approx. 1800 mm long In the rear area, steel/ checker plate flooring is fitted over a length of approx. 300 mm (protrudes slightly). Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, Crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. 3 pairs of stanchion positions Insertion slats Wooden slats Cv9Fkwmt Additional row of aluminum V-slats Vario steel slats, in conj

Overall weight: 36,000 kg, maximum load weight: 29,603 kg, axe configuration: 3 axles, loading space length: 13,680 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, first registration: 03/2014, Condition: used, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Three-sided, combined construction (Edscha) Double doors, SAF axles, toolbox, Dqowe9 water barrel, tires: 1st axle: Kama 385/65 R 22.5 2nd axle: Otani 385/65 R 22.5 3rd axle: Otani 385/65 R 22.5