Swap body case

Krone BDF-System 7.450 mm, LACK NEU!

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Brvlozl9Udk

Condition: used, Year of construction: 2009, color: blue, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 46.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, LACK NEW, Premium plus! used steel swap body, BDF system 7,450 mm long. \nSmooth side walls, portal doors at the rear with external espagnolette locks.\nInside keyhole system\n\nFinished in PREMIUM PLUS version: \n\n- Premium 2 K paint finish - high-gloss, here in RAL 5005 signal blue or RAL color as requested\n- Underbody blasted, primed and repainted in body color\n- New roller shutter cables\n- New rubber seals\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom, full length \n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request.\nDelivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Bjiylfzl

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel beaded BDF system 7,450 mm, with roller shutter door, LACK NEW Body completely overhauled, completely blasted and primed,\nnewly painted in RAL 9010 white,\nfactory-new white rigid support legs (can be exchanged for telescopic ones if required) \nrear aluminium roller shutter door, new rubber seals on roller shutter door, internal height 2500 mm,\n\nInternal 3 rows of combination anchor rails\n\nDelivery date possible at short notice. Leasing possible. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cmrtgoor8M

Condition: used, Year of construction: 2009, color: white, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, THROUGH LOADING SYSTEM, PAINT NEW! Used steel smooth-wall swap body BDF system 7,450 mm long, \nthrough-loading, front roller door and rear doors made of aluminum - brand new.\nBody NEW PAINTED in RAL 9010 white,\nUnderbody blasted, primed and painted in RAL 9010 white,\nNew telescopic support legs in RAL 9005 black,\nNew seals,\nNew ladders, galvanized,\nNew self-aligning bearings, galvanized,\n4 shims with brackets,\nInternal keyhole system in the side walls and scuff plate all-round\n\nAll values given are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cj7Cuqgzs3

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! LOCATION LEIPZIG AREA!!! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody here repainted in RAL 9010 pure white or RAL color on customer request\nAluminum roller door at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\n\nDelivery date on request. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Dpjlqr

Condition: used, color: green, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nIncluding SIDE DOOR (1.15 x 2.0 m)\n\nBody repainted here in RAL 6011 Reseda green. Other RAL colors available on request.\n\nAluminum roller shutter at the rear.\nIncl. brand new support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nInterior fittings:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel ropes on the roller shutter door\nincl. new side and bottom seals on the roller shutter door\n\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Brxaiefjlk

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody newly painted in RAL 7040 window gray. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cgdjbvk99C

Condition: used, color: light blue, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, PAINT NEW Used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\nBody NEW PAINTED here in RAL 5015 sky blue. \nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,480 mm.\nTotal weight: 16,000 kg. Empty weight: 3,250 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step pull-out ladder\nincl. new foam rubber seals on the portal doors\nincl. 7 steel plates on the sides and front wall as well as new sealing seam all around, \nto prevent corrosion \nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Bei2Tmhp2Vm

Condition: used, color: black, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth-wall swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9005 deep black. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Bejrx707Rde

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 3020 traffic red. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . H2Gtv3Ugv9

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9010 pure white. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Bgpg7Xkv

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, standard PAINTING NEW!!! Used steel - smooth wall swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\n\nInternal keyhole system in the side walls. Including ladder\n\nBody NEWLY PAINTED in *STANDARD version RAL 9010 white, support legs NEW telescopic in black,\nincluding underbody protection\n\n*Standard version:\n\nIn this version, the box is technically prepared for painting (partial scarring from sandblasting without filler repair).\nStandard is the solid basis for daily use - a case where the expectation corresponds to the requirements of a good repainting - but without new parts installed \n\n- Body completely checked and repaired\n- Clean pre-treatment with blasting work\n- in 2 K - high-gloss paint RAL standard pure white 9010\n- Desired color for a small surcharge on request\n-UVV test\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . B8Whdxgb

Condition: used, Year of construction: 2006, color: white, overall weight: 16,000 kg, empty load weight: 3,300 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Equipment: cooling unit, Fresh food service swap body, insulated BDF system 7.45 m, paint NEW with refrigeration unit MD 200 Thermo King - ex Denmark or Lippstadt Fresh food service swap body with Thermo King refrigeration unit MD 200, \nincl. new original maintenance at Thermo King, \ngeneral overhaul,\nnew paint in RAL 9010 white\nfactory-new telescopic support legs in black,\nincluding brand-new ISO doors from Krone,\nincluding new fuel tank,\nunderbody blasted and provided with underbody protection,\nnew galvanized ladder,\ninside double-decker device with loading beam\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Dpsqkr

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Swap body, steel smooth BDF system 7.45m, paint NEW standard version with 2K paint, gray or desired color used steel smooth-wall swap body, BDF system 7.45m, rear with aluminum roller shutter, refurbished \nBody NEW PAINTED in standard version - here in grey, - standard RAL colors available on request,\nUnderbody blasted and provided with underbody protection, \nNew telescopic or fixed support legs, \nBody with new sealing seam - also painted in body color,\nNew rubber seals on roller shutter\nNew current UVV\nSlight scarring from blasting may still be visible in standard version\nFor premium paint finishes, please contact us!\n\nInternal keyhole system in the side walls or lashing rails.\n\nAdditional price for wooden or plastic base plates with bracket\n\nWhile stocks last or delivery time on request if not directly available. \n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n\n\n . Dmoypz

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,520 kg, loading space volume: 45 m³, loading space width: 2,480 mm, loading space length: 7,310 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long. As good as new swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks. Rented for 4 weeks\nThereafter free at a special price. \n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. Parking height: 1,120 to 1,320 mm.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm.\nTotal weight: 16,000 kg. Empty weight: 2,520 kg.\n\nEquipment:\n30 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMulti-hole strip on both sides.\n3 rows of aluminum/wood slats. (manufacturer's choice)\n3 lashing rings in the outer frame.\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Beibpha

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nBody repainted in RAL 5002 ultramarine blue (THW blue). New sliding tarpaulins in RAL 5002 ultramarine blue (optionally also available in code XL). New roof tarpaulins in white.\nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm. (telescopic support legs on request)\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,480 mm. Side loading height: 2,450 mm. Rear through-loading height: 2,440 mm.\nTotal weight: 16,000 kg. Empty weight: 2,700 kg.\n\nInterior equipment:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nOur services:\n\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Dlridz

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 48.7 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,700 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. \nPitching height: 980 to 1,320 mm.\nLoading height rear portal: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12641-2 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Dos0Dh

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,520 kg, loading space volume: 45 m³, loading space width: 2,480 mm, loading space length: 7,310 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long. Brand new swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. Parking height: 1,120 to 1,320 mm.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm.\nTotal weight: 16,000 kg. Empty weight: 2,520 kg.\n\nEquipment:\n30 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMulti-hole strip on both sides.\n3 rows of aluminum/wood slats. (manufacturer's choice)\n3 lashing rings in the outer frame.\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . D7V8Dko

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 57.5 m³, loading space width: 2,480 mm, loading space length: 7,710 mm, loading space height: 3,005 mm, Swap-body platform, sliding tarpaulin BDF system, 7,820 mm long. Brand new swap-body platform with sliding tarpaulin, BDF system, 7,820 mm long.\n\nAutomobile version. High portal doors at the rear with internal espagnolette locks.\n\nExternal dimensions: L= 7,850 mm, W= 2,550 mm H=3,200 mm. Parking height: 980 mm.\nTotal weight: 16,000 kg, unladen weight: 2,780 kg.\n\nBody and side tarpaulins in RAL 9010 pure white. Support legs in RAL 9005 deep black and telescopic.\n(Contrary to the galvanized support legs in the pictures!)\n\nEquipment:\nInternal height: 3,200 mm.\nSliding roof. (Attention: can only be moved from the rear to the front.)\nLifting roof (the roof can be raised approx. 400 mm hydraulically/mechanically.)\n27 mm thick, waterproof screen printing plate floor,\nForklift truck accessible with a maximum axle load of max. 5,460 kg.\nPallet stop edge on the left and right with slotted holes for flexible lashing.\n1 pair of sliding center stanchions, 4 rows of wooden slats.\nSliding ladder at the rear.\n\nIncl. EN 12642 Code XL certificate. \n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Gw8Ubfa

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nBody repainted in RAL 9010 white. New sliding tarpaulins in RAL 9010 white (also available in code XL). New roof tarpaulins in white.\nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm. (telescopic support legs available on request)\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,480 mm. Side loading height: 2,450 mm. Rear through-loading height: 2,440 mm.\n\nPossible interior equipment:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nOur services:\n\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nSandblasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä. . Hlximu3Fd

Condition: new, color: silver, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 48.7 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,700 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 7035 light grey, sliding tarpaulins in RAL 9006 white aluminum.\nSupport legs in RAL 9005 jet black. \nParking height: 980 to 1,320 mm.\nRear portal loading height: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12642 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . 32Kp8Alk

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long, AIRPIPE possible - no water bag or ice on the roof! Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\n\nOur services:\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nSandblasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs (on request) in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\n\nWith AIRpipe system possible! against ice and water on the roof! (see pictures)\n\n- AIRpipe is suitable for any type of interchangeable body with tarpaulin ( sliding roof or fixed tarpaulin roof ) \n- No time-consuming, manual de-icing - no risk of your drivers falling\n- No traffic hazards due to falling ice sheets\n- Less stress on tarpaulins and superstructures due to gentle removal\n- Cost-effective and time-saving\n- Easy handling\n- Only the air line connection to the truck must be connected by the operator, everything else is prepared\nAdditional price AIRpipe: EUR 1.450,- net\n\nPossible interior equipment structure:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä. . Chzvwlnvre

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 1,890 kg, loading space width: 2,480 mm, Interchangeable platform, building material version BDF system, 7,450 mm long. Building material swap-body platform, BDF system, 7,450 mm long. \nWith drop sides, high bulkhead and tailgate.\n\nBody frame and bulkhead newly painted in RAL 9010 white, telescopic support legs new in black,\nAnodized drop sides 800 mm with recessed opening handles,\nAnodized tailgate with foot step, fold-out,\nBody blasted and provided with underbody protection\n\nAll values stated are approximate dimensions in mm and kg.\n\nThe offer is subject to change. Subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Bsc8Fa2Xb80

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 3,100 kg, loading space volume: 18.8 m³, loading space width: 2,480 mm, loading space length: 2,750 mm, loading space height: 2,750 mm, Swap body, smooth steel BDF system 7,450 mm, smooth-walled steel body, \n\nwith new UVV\n\nInternal keyhole plates and scuff plate all round.\n\n\nAll values stated are approximate dimensions in mm and kg.\n\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n . Uy3Pylzfst

Condition: used, Year of construction: 2012, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear roller shutter, corner height 2,750 mm, branded smooth steel wall swap body with aluminum roller shutter, usable, \n\nBody de-inscribed, technically checked and provided with new UVV, \n\nInternal keyhole system.\n\nNew paint finish on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery possible. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Dmt2Ir