Other

MÜLLER-MITTELTAL 14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Year of construction: 2023, Condition: new, Equipment: ABS, * TM-TA 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 x external drop supports at the rear 7Uldvedmbv * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis 15-pin power plug * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * axles, springs, air reservoir and support winch painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7 * Sample pictures

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Condition: new, Equipment: ABS, * TM-TA 14.4: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis 15-pin power plug * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate Djj83N * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * axles, springs, air reservoir and support winch painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7 * Sample pictures

Overall weight: 14,400 kg, maximum load weight: 12,260 kg, axe configuration: 2 axles, Condition: new, Equipment: ABS, * TM-TA 14.4: * incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box * with eyelet on both sides and quick shortener in special Y-version 6,3 to * Tensioning force with Lasi certificate * Wabco ABS * Emergency release device for spring-loaded cylinder * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front * 2 x external drop supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power plug Ie8Vkmyemt * Multi-chamber tail lights * Closed plastic single mudguards * Folding rear A-plate * Plastic bumpers on the underride guard * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 reversible body stops for lateral centering of the bodies * Trough stops at the front with oscillating stop, pluggable in 4 positions, * 2 x 5.3 to. lashing rings on each side UVV lashing rings for attaching tensioning elements * the axles, springs, air reservoir and support winch are painted black * Subject to errors and prior sale * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, * ETK-TA-R 14.4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale Bxhyljxz * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,950 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-ER 14.4 Plateau: * RDÜ ( tire pressure monitoring ) * EBS (electric braking system), * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. warning sign packages front and rear * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) Blfdrufcds * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on the left & right sides * Side collision protection * Underride guard * Plastic quarter mudguards * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 mtr. cont. outer width) and lockable * Locking dimension inserted according to ISO - DIN 15190 = 2,259 mm. Cont. locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm * Perforated outer frame bent at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing brackets can be installed every 600 mm - 5 x 3 to. UVV lashing brackets installed on each side, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring (at the front directly behind the cont. latches in the wooden floor and at the rear in the end beam) in the front and end beams, various holes for 1.2 to. lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred and tracked vehicles * Storage compartment recessed into the chassis from the rear underneath the loading area * Chassis, drawbar, bulkhead, underride guard and rear supports hot-dip galvanized * Axles, air tank, front support winch and flanged drawbar painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,950 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-ER 14.4 Plateau: * RDÜ ( tire pressure monitoring ) * EBS (electric brake system) Pwgoupwxxh * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. warning sign packages front and rear * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on the left & right sides * Side collision protection * Underride guard * Plastic quarter mudguards * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 400 mm high bolted bulkhead * 50 mm softwood floor, * 2 pairs of container locks (extendable to 3 mtr. external container width) and lockable, locking dimension inserted according to ISO - DIN 15190 = 2,259 mm. Cont. locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm * Perforated outer frame bent at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing brackets can be installed every 600 mm - 5 x 3 to. UVV lashing brackets installed on each side, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the rear in the end beam), in the front and end beams various holes for 1.2 to. lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred and tracked vehicles * Storage compartment recessed into the chassis from the rear underneath the loading area * Chassis, drawbar, bulkhead, underride guard and rear supports hot-dip galvanized * Axles, air tank, front support winch and flanged drawbar painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, * ETK-TA-R 14.4: Gogoac * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,950 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-ER 14.4 Plateau: * RDÜ ( tire pressure monitoring ) * EBS (electric braking system), * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. warning sign packages front and rear * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on the left & right sides * Side collision protection * Underride guard * Plastic quarter mudguards * 15-pin power plug * LED lighting system 12 / 24 V Mqxwe9Ihjl * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 mtr. cont. outer width) and lockable * Locking dimension inserted according to ISO - DIN 15190 = 2,259 mm. Cont. locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm * Perforated outer frame bent at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing brackets can be installed every 600 mm - 5 x 3 to. UVV lashing brackets installed on each side, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring (at the front directly behind the cont. latches in the wooden floor and at the rear in the end beam) in the front and end beams, various holes for 1.2 to. lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred and tracked vehicles * Storage compartment recessed into the chassis from the rear underneath the loading area * Chassis, drawbar, bulkhead, underride guard and rear supports hot-dip galvanized * Axles, air tank, front support winch and flanged drawbar painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,400 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, * ETK-TA-R 14.4: * EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead Boc9Nt2Pfh9 * Main frame made of fine-grained steel * Steel Pal.- 2-side tipper body Front wall made of smooth sheet metal, continuous side walls - can be folded down without center stanchions with dropside spring lifter - and swinging over manual central locking system Central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm floor made of fine-grained steel * Two-part mechanical grating drive-on ramps with aluminum top section 2,150 + 1,300 mm x 600 mm (can be pushed together manually up to 80 mm) * Chassis, drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * Side walls and bridge in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,950 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-ER 14.4 Plateau: * RDÜ ( tire pressure monitoring ) * EBS (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 to. BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. warning sign packages front and rear * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on the left & right sides * Side collision protection * Underride guard * Plastic quarter mudguards Batpsqwkhdl * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 400 mm high bolted bulkhead * 50 mm softwood floor, * 2 pairs of container locks (extendable to 3 mtr. external container width) and lockable, locking dimension inserted according to ISO - DIN 15190 = 2,259 mm. Cont. locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm * Perforated outer frame bent at approx. 45 degrees with 2 to. Lashing force every 480 mm, installation of 3 to. Drop lashing brackets can be installed every 600 mm - 5 x 3 to. UVV lashing brackets installed on each side, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the rear in the end beam), in the front and end beams various holes for 1.2 to. lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 to. / pair) suitable for rubber-tyred and tracked vehicles * Storage compartment recessed into the chassis from the rear underneath the loading area * Chassis, drawbar, bulkhead, underride guard and rear supports hot-dip galvanized * Axles, air tank, front support winch and flanged drawbar painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 12,080 kg, axe configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Condition: new, Equipment: ABS, tail-lift, * ETM-TA 14.4: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 to. Gigant axles Bjazmui7Dqo * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted drawbar eye * Jost support winch at the front, side collision protection * Folding rear A-plate * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * plug-in steel rear wall * 50 mm softwood floor * 1 sliding plate support 750 x 1,000 mm in the front area incl. 2 trough stops at the front, each pluggable in 2 positions * 4 insertable tray stops in 2 positions for centering the trays at the sides * 1 x (13.5 to.) UVV-Zurring on each side for attaching clamping elements * 2 ratchet clamps (spindle adjustment) with compensating chain and quick shortener (clamping force 6,300 kg) * Rear cross member for attaching aluminum trailer ramps incl. 2 additional rear drop supports * Unloaded loading edge approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air reservoir painted black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading sill unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 12,080 kg, axe configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Condition: new, Equipment: ABS, * ETM-TA 14.4: * Wabco ABS brake system Bg2Gamslyu * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted drawbar eye * Jost support winch at the front, side collision protection * Folding rear A-plate * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * plug-in steel rear wall * 50 mm softwood floor * 1 sliding plate support 750 x 1,000 mm in the front area incl. 2 trough stops at the front, each pluggable in 2 positions * 4 insertable tray stops in 2 positions for centering the trays at the sides * 1 x (13.5 to.) UVV-Zurring on each side for attaching clamping elements * 2 ratchet clamps (spindle adjustment) with compensating chain and quick shortener (clamping force 6,300 kg) * Rear cross member for attaching aluminum trailer ramps incl. 2 additional rear drop supports * Unloaded loading edge approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air reservoir painted black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading sill unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides Blnb28Gsj33 * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front Ij0Bg3Mw * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 12,080 kg, axe configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Condition: new, Equipment: ABS, * ETM-TA 14.4: Uwrv2Jhk * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted drawbar eye * Jost support winch at the front, side collision protection * Folding rear A-plate * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * plug-in steel rear wall * 50 mm softwood floor * 1 sliding plate support 750 x 1,000 mm in the front area incl. 2 trough stops at the front, each pluggable in 2 positions * 4 insertable tray stops in 2 positions for centering the trays at the sides * 1 x (13.5 to.) UVV-Zurring on each side for attaching clamping elements * 2 ratchet clamps (spindle adjustment) with compensating chain and quick shortener (clamping force 6,300 kg) * Rear cross member for attaching aluminum trailer ramps incl. 2 additional rear drop supports * Unloaded loading edge approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air reservoir painted black * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading sill unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * available immediately from Egestorf on the A7

Overall weight: 24,000 kg, maximum load weight: 18,900 kg, axe configuration: 3 axles, Condition: new, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, Besovyrj3Gs * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * LED tail lights * 15-pin power plug * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible * 8 removable trough stops for centering the troughs at the side, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum landing ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible * Axles, turntable, tow bar and air tank painted in a black tone * Vehicle has a daily registration in 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf

Overall weight: 24,000 kg, maximum load weight: 18,900 kg, axe configuration: 3 axles, Condition: new, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * RDÜ (tire pressure monitoring system) * 3 x 11 tonne Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear L9Eqejjb8 * LED tail lights * 15-pin power plug * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible * 8 removable trough stops for centering the troughs at the side, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum landing ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible * Axles, turntable, towing scissors and air tank painted in a black tone * Vehicle has a daily registration in 06/2024 due to missing tire pressure monitoring system and was not loaded / used * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf

Overall weight: 24,000 kg, maximum load weight: 18,900 kg, axe configuration: 3 axles, Condition: new, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes Ie9Gc03Rsh * 3 x 11 tonne Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * LED tail lights * 15-pin power plug * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible * 8 removable trough stops for centering the troughs at the side, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum landing ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible * Axles, turntable, tow bar and air tank painted in a black tone * Vehicle has a daily registration in 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf

Overall weight: 11,900 kg, maximum load weight: 8,300 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * Two-way tipper - ETK-TA-R 11.9 "Masterline" * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit Bg0Xgre22V * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead, main frame made of fine-grained steel * Steel Pal. 2-side tipper body, continuous side walls -without center stanchions- can be folded down with dropside spring lifter * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame, 4 mm sheet steel floor * Mechanical grating ramps approx. 2,750 x 600 mm (can be pushed together manually up to 30 mm) * Reinforced body with load securing certificate to EN 12642 XL Chassis * Drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Color RAL 9010 pure white * Subject to errors and prior sale * available CW 40/2024 from Egestorf

Overall weight: 18,000 kg, maximum load weight: 13,850 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Condition: new, * KA-TA-RT 18: * Gigant axles, * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * Air suspension * Drawbar with 50 mm bottle drawbar and height adjustment by 110 mm via offset plate, * Jost support winch at the front * Mechanical external folding supports at the rear * Tool box made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm mounted on the right side * Plastic quarter mudguards * 15-pin power plug * Multi-chamber tail lights in the underride guard * Steel pallet - 3-sided tipper eye structure made of fine-grained steel Fixed front wall made of smooth sheet metal * Full-length side walls -without center stanchion- can be folded down with dropside spring lifter and swinging via man. Central locking * Hot-dip galvanized screwed rear stanchions * Combination steel wing door rear wall 2-leaf asymmetrically divided - can be swivelled and locked at 270°, cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping, locking via galvanized espagnolette lock and central locking, combination tailgate, deactivation function for automatic rear wall opening when tipping backwards with wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet steel floor * Rear mounting rail for the feeder ramps) * Mounting shaft for feeder ramps embedded in the rear of the chassis * 1 pair of aluminum trailer ramps (10 to. / pair) approx. 3,570 x 410 mm suitable for rubber-tyred and tracked vehicles Bg2Dg9Ruhw * Chassis, drawbar, underride guard, rear folding supports hot-dip galvanized * but the axles, springs, air reservoir, front support winch painted black * 385/55 R 22.5 tires * Body color: RAL 9010 pure white * Chassis is galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 18,000 kg, maximum load weight: 13,850 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Condition: new, * KA-TA-RT 18: * Gigant axles, * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * Air suspension * Drawbar with 50 mm bottle drawbar and height adjustment by 110 mm via offset plate, * Jost support winch at the front * Mechanical external folding supports at the rear * Tool box made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm mounted on the right side * Plastic quarter mudguards * 15-pin power plug * Multi-chamber tail lights in the underride guard * Steel pallet - 3-sided tipper eye structure made of fine-grained steel Fixed front wall made of smooth sheet metal * Full-length side walls -without center stanchion- can be folded down with dropside spring lifter and swinging via man. Central locking * Hot-dip galvanized screwed rear stanchions * Combination steel wing door rear wall 2-leaf asymmetrically divided - can be swivelled and locked at 270°, cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping, locking via galvanized espagnolette lock and central locking, combination tailgate, deactivation function for automatic rear wall opening when tipping backwards with wing door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet steel floor * Rear mounting rail for the feeder ramps) * Mounting shaft for feeder ramps embedded in the rear of the chassis * 1 pair of aluminum trailer ramps (10 to. / pair) approx. 3,570 x 410 mm suitable for rubber-tyred and tracked vehicles * Chassis, drawbar, underride guard, rear folding supports hot-dip galvanized * but the axles, springs, air reservoir, front support winch painted black * 385/55 R 22.5 tires * Body color: RAL 9010 pure white Djj9Af * Chassis is galvanized * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf on the A7

Overall weight: 18,000 kg, maximum load weight: 14,180 kg, axe configuration: 2 axles, Condition: new, * RA-T-Kombi 18.0 : * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Disc brakes 19.5" * Duomatic brake connection * 2 x 10 to. SAF axles * Air suspension with automatic lowering when uncoupling the brake * Pneumatically lowerable drawbar 2,100 mm long with 40 mm drawbar eye and height adjustment device * Reflective contour strip at the sides and rear * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights * Closed side collision protection as advertising space * Plastic mudguards with splash guard * Plastic bumpers at the rear * Folding rear A-plate * Roller recesses in the bogie area for roll-off container transport Cont. length of 5,500 - 7,000 mm possible * Pneumatic 4-fold clamp locking system and mechanical plug-in stop bracket at the front of the track (2 positions) * Transport of up to 2 skip containers with max. 10m³ volume possible * 8 reversible skip stops for lateral centering of the skips * Trough stops at the front and rear with swinging stop, 2 lashing ropes at each side and 4 x UVV lashing rings (10.6 tons) for attaching tensioning elements for form-fit and force-fit tensioning of the troughs, lockable storage compartment for the trough stops etc. recessed in the rear of the frame * 2 x storage boxes made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm for container nets etc. * Chassis, underride guard and locking parts hot-dip galvanized * Axles, air reservoir, drawbar and bogie painted black * Driving height loaded approx. 1,130 mm, unloaded approx. 1,150 mm * Load securing certificate available * Permissible total weight of 20,000 kg technically possible * Vehicle has a day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty Bhmzry7Cnx * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 11,900 kg, maximum load weight: 8,620 kg, axe configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, * KA-TA-R 11.9: * 5.5 meter long bridge completely in RAL 9010 white * RDÜ ( tire pressure monitoring ) * Electronic braking system EBS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Tool box made of galvanized sheet steel on the right side * 15-pin power plug * LED tail lights * Hot-dip galvanized bolted underride guard * Tool box made of galvanized sheet steel on the right side * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Full-length side walls without center stanchions can be folded down with dropside spring lifter * Tailgate can be folded down and swivels via man. Central locking * Hot-dip galvanized rear stanchions screwed on * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet steel floor * Mounting rail at the rear for the feeder ramps * Preparation for later retrofitting of dropside extensions * Reinforced body with load securing certificate in accordance with EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles Dozeejcpnr * Storage compartment lockable from the rear underneath the loading area recessed in the chassis * Axles, springs, air reservoir, drawbar and support winch painted black * Bridge superstructure color: RAL 9010 pure white * Tires: 235/75R17.5 * Wheelbase: 990 mm * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Available for immediate delivery from Egestorf on the A7

Overall weight: 11,900 kg, maximum load weight: 8,850 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, Condition: new, * KA-TA-R 11.9 "Masterline": * Floor and front wall hot-dip galvanized * EBS braking system * Emergency release device for spring-loaded cylinder * RDÜ tire pressure monitoring * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * LED lighting * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead * Steel Pal. 3-side tipper body (continuous side walls -without center stanchions- can be folded down with dropside spring jack * Bolted rear stanchions * Combination steel wing doors Rear wall 2-leaf asymmetrically divided 270° swivel and lockable - cannot be folded down - and with additional swing frame for automatic rear wall opening when tipping Locking via galvanized espagnolette lock and central locking system * Deactivation function for automatic rear wall function when tipping backwards with the hinged door open * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. Lashing ropes embedded in the outer frame, 4 mm sheet steel floor, support rail at the rear for the feeder ramps * Reinforced body with load securing certificate in accordance with EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred & tracked vehicles * Storage compartment lockable from the rear underneath the loading area recessed in the chassis Chassis, drawbar * Front wall, tipping platform, rear stanchions, underride guard, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white 7Uktxqizek * Axles, springs, flanged drawbar, air reservoir and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Available for immediate delivery from Egestorf on the A7

Overall weight: 11,900 kg, maximum load weight: 8,300 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Condition: new, Equipment: ABS, * Two-way tipper - ETK-TA-R 11.9 "Masterline" * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 to. BPW axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * 15-pin power plug * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Mesh hooks at the side and rear in the bearings of the central locking system and 2 pieces on the bulkhead, main frame made of fine-grained steel * Steel Pal. 2-side tipper body, continuous side walls -without center stanchions- can be folded down with dropside spring lifter * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame, 4 mm sheet steel floor Cgjt79Df2 * Mechanical grating ramps approx. 2,750 x 600 mm (can be pushed together manually up to 30 mm) * Reinforced body with load securing certificate to EN 12642 XL Chassis * Drawbar, rear stanchions, underride guard, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, flanged drawbar and support winch painted black * New vehicle without initial registration with manufacturer's warranty * Color RAL 9010 pure white * Subject to errors and prior sale * available CW 40/2024 from Egestorf