Buy commercial vehicles (37)
Sort results
- Lowest price Highest price
- Latest listings Oldest listings
- Shortest distance Farthest distance
- Latest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Latest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Latest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- Relevance
- Relevance
Web Trailer GmbH
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERWFZ/W-18 235/75 17,5 Wechselanhänger
Call
Overall weight: 18,000 kg, axe configuration: 2 axles, Year of construction: 2024, Condition: new, Equipment: ABS, WEB-Trailer WFZ/W-18 235/75 17.5 Turntable swap body trailer, for
swap bodies C7.15 to C7.45
Chassis flush with rear for swap bodies Total length 7150 mm
Attention: body length max.7450 permissible)
Chassis designed for swap bodies from 7150 to max. 7450 mm
(symmetrical superstructures)
2 outriggers and with 4 retractable pivot locks, 20"
Arrangement for mounting swap bodies
Check parking heights: Vehicle must be raised at least +70mm
and lower - 20 mm
Spring center approx. 1100 mm
Parking height approx. 970 to 1020 mm
Underride height approx. 930 mm on level ground
Axle loads: 18 000 kg (2 x 9000 kg)
Driving position approx. 970 mm (unloaded)
Coupling height (center) approx. 730 mm unloaded
Front stop, foldable and adjustable for 7150 + 7450 mm
Symmetrical swap bodies
Approval/COC
Bsq8R3Jr
Free choice of make Manufacturer's axle Axle 9to 17.5" drum brake Air suspension unit 9 to load capacity each with bellows diameter approx. 300 mm
Total lift approx. 180 mm (without height limit)
Lifting+lowering control unit on the left in the direction of travel
Dual-circuit air brake system EG 71-320
EBS brake system manufacturer's choice
Brand tires 235/75 R 17.5
Tire pressure control
flashing SML
15-pin lighting system 24 Volt LED
Plastic mudguards, 1st axle quarter behind tires, plus cover
2nd axle 180° mudguard
Mud flaps Antispray
Painting of the chassis in RAL
Hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and prepare a no-cost and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILERTandem Durchlader Alufelgen Zugdeichsel höhenver
Call
Overall weight: 16,000 kg, axe configuration: 2 axles, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 3,770 mm, Curtainsider body side height 2500mm from loading area to lower edge of outer rail
Bhisnnf
Axle loads: 18 000 kg (2 x 9000 kg)
Chassis length 7400 mm
Coupling height (center) approx. 800 mm unloaded
Chassis width approx. 2480 mm (outer frame-outer frame)
Driving height: unloaded approx. 1150 mm (top edge of floor)
Drawbar load approx. 500kg
COC papers
Outer frame 4 mm with groove for lashing eyes and hole pattern on the side
6 pairs of lashing eyes (brackets) screwed into the outer frame with groove
Cross member spacing IPE 80 approx. 600-650 mm (7.2 t floor load)
1 set of front support winches, single-sided operation,
1 set of rear drop supports, height-adjustable
Height-adjustable drawbar, 500 kg drawbar load
Drawbar eye ø 40mm
SAF brand axles
9to 22.5" disc brake axle
without axle lift
Axle spacing approx. 1310 mm
Air suspension unit each 9 tons load capacity with bellows diameter approx. 300 mm
Total lift approx. 180 mm
EBS brake system Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Tire pressure control
Brand tires 355/50R 22.5
Aluminum Alcoa durabright
E-wheel 355/50 on steel rim
Body certificate according to DIN EN 12642 XL for through-loaders
Contour marking on tarpaulins and rear portal
ECE plates on bottom rear door
Rear portals with 4 internal espagnolette locks Door leaves made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear (optionally from the front)
1 set of side sliding panels of our choice
Front doors with double hinge and ramp plate with hinges on the head frame
Drive-over plate (length 315mm)
5 rows of aluminum slats
Sliding tarpaulin PVC12x12,880gr
Reinforced roof tarpaulin with 12x12 roof fabric
Rear and front tensioning ratchet
15-pin plug
Lighting system 3x2x3-chamber lights
flashing SML
Screen printing floor 27mm crosswise laid
Floor: Certificate for tested forklift axle load 7.2t according to DIN EN 283
Galvanized chequer plate screwed onto the last approx. 600mm
Access ladder at the rear right, foldable and extendable, with platform
2 rubber bumpers at the rear corners
Antispray mud flap
Plastic mudguards, 180 degrees
Folding aluminum side bumper
Chassis painted in RAL 9005 black
KTL with zinc phosphating plus powder, maximum corrosion protection
COC papers
Price ex works
View details
Listing
Twist
7,591 km
Swap body flatbed
WEB-TRAILERWechselbrücke WPSQ 7,45 mit Bordwand
Call
Condition: new, loading space width: 2,480 mm, loading space length: 7,450 mm, loading space height: 1,000 mm, WEB Trailer
----
Swap body WPSQ 7.45 with dropside superstructure
Swap body 7450
Parking height approx. 1220 mm
Chassis width in length approx. 2480 mm (outer frame-outer frame)
Chassis length WP approx. 7380 mm (head frame-head frame)
Outer frame height approx. 125 mm, with groove for lashing eyes, 4 mm
7 pairs of lashing eyes (brackets) screwed into the outer frame with groove
4 adjustable support legs for swap bodies 7x50 mm
4x drop guard for support legs mounted on the chassis
2Tdoeq
Dropside height approx. 1000 mm (with tie rod)
Dropside at rear with folding step recessed inside
Front wall approx. 1200 mm high, with sheet metal cladding
Optional: Body certificate DIN EN 12642 XL
Screen printing floor 27mm crosswise laid
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Painting of the floor assembly in RAL 9005 or nova gray 7350 other colors at extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and prepare a no-cost and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Find out now
+49 201 858 95 507
+49 201 858 95 507
Listing
Twist
7,591 km
Swap body flatbed
WEB-TRAILERWechselbrücke WPSQ 7,45
Call
Condition: new, loading space width: 2,480 mm, loading space length: 7,450 mm, loading space height: 2,550 mm, Swap body WP 7.45
----
Swap body 7450
Curtainsider superstructure Lateral height 2450 mm from loading area to
lower edge of outer rail
Parking height approx. 1220 mm
Chassis width approx. 2480 mm (outer frame-outer frame)
Chassis length WP approx. 7380 mm (head frame-head frame) for
Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4
Dskjtah
mm, with lashing holes on the outside
7 pairs of lashing eyes (brackets) screwed into the outer frame with groove
4 support legs for swap bodies 7x50 mm adjustable 1 including
4x drop guard for support legs mounted on the chassis
Contour marking on tarpaulins and rear portal
ECE plates on rear doors/lower tailgate
Rear portals with 4 internal espagnolette locks Door leaves made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear, make
of your choice Manufacturer
1 set of side sliding panels, make of our choice
Front wall 90° corners, no volume corners, large side l. Through-loading,
Standard steel end wall with 400 mm steel cassettes
inside wear plate approx./max. 2.40
3 rows of wooden slats
Screen printing floor thickness 27 mm
Screen-printed floor laid crosswise
Sliding tarpaulin of our choice, tarpaulin fabric PVC12x12, 880gr,
Rear and front tensioning ratchet
Coating/painting
KTL coating with zinc phosphating plus powder, maximum corrosion protection.
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Roll-off trailer
WEB-TRAILERAbroll-Schlittenanhänger R19.5 Zwilling 10to
Call
Overall weight: 20,000 kg, maximum load weight: 16,500 kg, axe configuration: 2 axles, loading space length: 7,000 mm, Year of construction: 2024, Condition: new, Equipment: ABS, Swap-body container chassis with tires 19.5 Zwilling ARA18
Slide trailer for transporting roll-off and slide-off containers 5000-7000mm according to DIN 30722
----
Chassis suitable for transporting roll-off presses
----
Axle loads: 18,000 kg (technically 2 x 10,000 kg)
Coupling height approx. 700 mm
COC papers
Drawbar 20t rigid drawbar eye ø 40 mm
Distance from center of drawbar eye to front edge approx. 2600 mm
Central lubrication point on the steering ring
Free choice of axle make by WEB Trailer
Axle 10t disc 19.5" twin tires
Dual-circuit air brake system EG 71-320
Coupling heads red/yellow or DUOMATIC
EBS brake system
Tire pressure control
optional: axle load sensor
optional: additional release valve, only acting on the front axle
Brand tires 265/70 R 19.5 twin
Automatic lowering for container pick-up
Two pairs of special hook locks for roll-off containers
--> (pneumatically operated + low-tensioning)
Carriage mounted on rolling bearings, self-centering at the rear
Safety circuit for hook locks
Dmnma9L
15-pin plug
Lighting system Version all lights LED
Side marker lights (LED) flashing
Welded-on underride guard
Side collision protection plastic or aluminum profiles
Marking plate (ECE)
A-plate for waste management foldable at the rear
optional: plastic or stainless steel tool box
optional: open box for net storage etc.
Paint finish
KTL with zinc phosphating plus powder coating in RAL
option
Hot-dip galvanizing
Price ex works
Attention!!!
Pictures may show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Suitcase
WEB-TRAILERTFSSQ Plywood-Trockenfrachter R19.5 MEGA
Call
Overall weight: 36,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,870 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, WEB ? Trailer TFSSQ-27 12t PlyWood dry freight, 3-axle semi-trailer, 19.5"
Dimensions:
Driving height unloaded approx. 1080 (loading height) with semi-trailer height approx. 960mm
Chassis length approx. 13620mm (loading length inside)
Internal width approx. 2480mm (loading width)
Total width approx. 2550mm
Interior height approx. 2870mm
Maximum fifth wheel load approx. 12000kg
Axle loads: 24 000kg
Approval:
CoC papers
Chassis:
Ckb78Mgxj7
Chassis made of welded longitudinal beams and inserted cross beams
Outer frame height approx. 80 mm without lashing eyes in the floor (optionally available)
Support:
24 to telescopic support winch brand (Jost/SAF)
Axles:
Brand make (SAF/BPW/JOST)
9to 19.5" disc brake, single tires
without axle lift (option)
Axle spacing approx. 1310/1310mm
Air suspension unit per 9t total lift approx. 180mm
Brake:
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Air reservoir 2x approx. 80 l in steel
Tire pressure control
Tires:
Brand tires 445/45 R 19.5 on steel wheel
Body:
Plywood body (optional: ISO walls)
Body certificate DIN EN 12642 XL
Steel front wall with 400 mm steel cassettes,
inside wear plate over full height
Iso-roof min. 30mm
(including LED light strips running lengthwise right and left)
Side walls with Combi anchor rails running lengthways, on both sides
(number and position according to customer specification)
Side walls in approx. 20 mm Plywood (optional: ISO walls)
Side walls with reinforced base rubbing strip approx. 4mm galvanized folded sheet metal profile approx. 400mm high and glued and screwed to the walls.
Rear portals with 4 internal espagnolette locks Door leaves
made of steel sandwich profiles
Lighting system:
LED lighting system
15-pole connection at the front
flashing SML
Floor:
Screen-printed floor 27mm crosswise laid
Certificate for tested forklift axle load 9.0t in accordance with DIN EN 283
Attachments:
Access ladder rear right, foldable and extendable with platform
Two wheel chocks with holder, plastic or galvanized
2 rubber bumpers at the rear corners
Plastic mudguards (180°)
Side collision protection on both sides Aluminum or plastic profile
Coating:
Painting of the chassis in RAL 9005 or nova grey 7350 other colors at an extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILER3-Achs Schiebeplane + Bordwand + FLEXSTRAP
Call
Overall weight: 35,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, PRSSQ 27 SYS Three-axle curtainsider with plywood transverse and drop sides
----FLEXSTRAP - The new system for load securing
video
----
Safety for the driver
No more throwing, no more climbing
Safe operation by ONE person
What is easy is also used!
Easy to move
Fast loading and unloading
Precise positioning
Also possible for round and difficult loads
Movement over high goods
High pallets, paper rolls, etc.
Sliding roof function remains fully intact
The system runs directly under the roof (approx. 60 mm)
Saves time
Less downtime, no lost belts
Fast amortization
Curtainsider superstructure Lateral height 2650 mm from loading area to lower edge of outer rail
Curtainsider body side height 2650mm from loading area to lower edge of outer rail
Length approx. 13620mm
Width approx. 2480mm
Unloaded ride height approx. 1250 mm with 1130 mm saddle height
COC papers
Bbgxympy9Ts
Chassis made of welded side members and inserted cross members
Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4 mm, with lashing holes on the outside
13 pairs of lashing eyes (brackets) screwed into the outer frame with groove !!! According to EU standard (tested lashing force 5t per lashing point)
24 to telescopic support winch brand (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22.5" disc brakes
without axle lift (option)
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL
Contour marking ECE plates
Door leaf with 4 internal espagnolette locks made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear
3 sets of side sliders
Front wall steel 400 mm steel cassettes inside wear plate
Side wall set for curtainsider, anodized on the inside, height. approx. 600 mm
3 rows of wooden slats (optional aluminum)
Reinforced roof tarpaulin with 12x12 roof fabric
Rear tensioning ratchet, front only release device
Sliding tarpaulin of our choice, tarpaulin fabric PVC12x12, 880gr
LED lighting system
Tire pressure control
flashing SML
15-pin front connection
Screen printing floor27mm screen printing floor transversely laid in the neck area longitudinally laid
Screen printing floor glued instead of screwed
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Premium rear lamp panel, large and edged
Welded-on underride guard (rectangular tube)
Access ladder at the rear right, foldable and extendable with platform
Two wheel chocks with holder, plastic or galvanized
2 rubber bumpers at the rear corners
Plastic short mudguards (quarter) in front of and behind rigid axle unit
Side collision protection on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!! Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!----FLEXSTRAP 8x
----KTL coating with zinc phosphating
View details
Listing
Twist
7,591 km
Platform open
WEB-TRAILERPRASQ 18 2- Achs Baustoffanhänger
Call
Overall weight: 18,000 kg, maximum load weight: 14,050 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, PRASQ 18 Turntable trailer with drop sides
Chassis made of welded longitudinal beams and inserted cross beams
Spring center approx. 1300 mm
Permissible total weight approx. 18000 kg
Coupling height (center) approx. 800 mm unloaded
Front overhang approx. 710 mm (dimension head frame to center of front axle)
Rear overhang approx. 950 mm (center of axle to rear edge of head frame)
Chassis length approx. 6000 - 8000 mm (head frame to head frame)
Chassis width approx. 2480 mm (loading width) Overall width approx. 2550 mm
Unloaded ride height approx. 1300 mm (top edge of floor)
Outer frame height:
Height approx. 125 mm, t=4 mm with external slope and lashing holes every 200 mm, without lashing rings
Forklift collision protection as flat steel on the left and right of the outer frame
Drawbar:
Drawbar 18t rigid, make of our choice
Distance from center of drawbar eye to front edge of head frame according to customer specification
Drawbar eye ø 40 mm (50 mm optionally available)
Axles:
Brand make (SAF/BPW/JOST)
9to 22.5 "with large disc brake, without lifting and lowering
(total lift approx. 200 mm)
Brake:
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Tire pressure control
Tires:
Brand tires 385/65 R 22.5 of our choice Wheel 11.75 x 22.5
Body:
Dropside in anodized design, height approx. 800 mm
Rear dropside with two folding steps on the inside
Front wall approx. 1200 mm high, with sheet metal cladding, screwed on
Floor:
Screen-printed floor 27 mm crosswise laid
Certificate for tested forklift axle load 7.2t according to DIN EN 283 (9t optionally available)
Lighting system:
LED lighting system
15-pin plug
flashing SML
Add-on parts:
Half-shell mudguards 180°
Side collision protection on both sides Aluminum or plastic profile
One plastic wheel chock with bracket
Coating/painting vehicle
Painting of the chassis in RAL 9005 or nova gray 7350
Other colors at an extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!!
Pictures show special equipment
Pioh2
Let us advise you and prepare a free and non-binding offer. Leasing, financing, installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERCOS-27 Mitten-Heckschieber Chassis 45ft
Call
Overall weight: 44,000 kg, maximum load weight: 38,500 kg, axe configuration: 3 axles, Year of construction: 2024, Condition: new, Equipment: ABS, COS-27 Center-rear slide Container chassis for containers with center and rear extension
For holding
1x20 foot containers flush to the rear,
1x40' high cube containers in gooseneck design
2x20 foot containers
1x45 foot containers (only with special permission at the rear with excess length)
CoC papers
Ride height front unloaded approx. 1250 mm rear approx. 1130 mm (upper edge
upper edge) with fifth wheel height 1120 mm
Chassis length approx. 9331 mm (inserted) Technical axle loads: 27 000 kg (3 x 9000 kg)
Maximum fifth wheel load approx. 16000 kg
Container locks Jost or Schneider
24 to telescopic support winch make (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22.5" disc brake
Axle lift first axle automatic function (optional third axle)
EBS brake system make Knorr or Wabco
Axle spacing approx. 1310/1410 mm
Brand tires 385/55 R 22.5
Lighting system 7x multifunction LED
Tire pressure control
flashing SML
15-pin + 2x7-pin front connection
Mechanical extension of center section via tractor unit
Pneumatic locking
One pneumatic cylinder and operating lever for rear extension
Cacppdyou9
Impact protection system consisting of flat steel 50x30mm at the rear horizontally on C-tube between the side plates Corner plate 30mm on container lock instead of impact buffer overhang 50mm
Two wheel chocks with holder, plastic or galvanized
Plastic mudguards 180°
Side collision protection on both sides Aluminum or plastic profile
Premium rear lamp plate, large and folded (anodized aluminium)
Welded-on underride guard (rectangular tube)
ECE marking plate
Front stop for container
Side bumpers on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL with zinc phosphating plus powder, maximum corrosion protection
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILERSchiebeplane mit innenliegenden Bordwänden
Call
Overall weight: 35,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, PRSSQ 27 SYS Three-axle curtainsider with plywood
----FLEXSTRAP - The new system for load securing
video
----
Safety for the driver
No more throwing, no more climbing
Safe operation by ONE person
What is easy is also used!
Easy to move
Fast loading and unloading
Precise positioning
Also possible for round and difficult loads
Movement over high goods
High pallets, paper rolls, etc.
Sliding roof function remains fully intact
The system runs directly under the roof
Saves time
Less downtime, no lost belts
Fast amortizationCurtainsider superstructure Lateral height 2650 mm from loading area to lower edge of outer rail
Curtainsider body side height 2650mm from loading area to lower edge of outer rail
Length approx. 13620mm
Width approx. 2480mm
Unloaded ride height approx. 1250 mm with 1130 mm saddle height
COC papers
Chassis made of welded side members and inserted cross members
Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4 mm, with lashing holes on the outside
13 pairs of lashing eyes (brackets) screwed into the outer frame with groove !!! According to EU standard (tested lashing force 5t per lashing point)
24 to telescopic support winch brand (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22.5" disc brakes
without axle lift (option)
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Bry0Cuta
Brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL
Contour marking ECE plates
Door leaf with 4 internal espagnolette locks made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear
3 sets of side sliders
Front wall steel 400 mm steel cassettes inside wear plate
3 rows of wooden insert slats (optional aluminum)
Reinforced roof tarpaulin with 12x12 roof fabric
Rear tensioning ratchet, front only release device
Sliding tarpaulin of our choice, tarpaulin fabric PVC12x12,880gr
LED lighting system
15-pin + 2x7-pin connection at the front
Tire pressure control
flashing SML
Screen printing floor 27mm screen printing floor transversely laid in the neck area longitudinally laid
Screen printing floor glued instead of screwed
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Premium rear lamp panel, large and edged
Welded-on underride guard (rectangular tube)
Access ladder at the rear right, foldable and extendable with platform
Two wheel chocks with bracket, plastic or galvanized
2 rubber bumpers at the rear corners
Plastic short mudguards (quarter) in front of and behind rigid axle unit
Side collision protection on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!! Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERCOS-24 Tankcontainer-Chassis QSTE 690
Call
Overall weight: 42,000 kg, maximum load weight: 38,700 kg, axe configuration: 3 axles, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 1,310 mm, Equipment: ABS, COS-24 straight container chassis for 1x20ft tank containers
from QSTE 690
Unloaded ride height approx. 1310 mm with saddle height 1150 mm
Spring center approx. 1300 mm
Axle loads: 27 000 kg (3 x 9000 kg)
Maximum fifth wheel load approx. 15000 kg
ADR certificate from TÜV/Dekra (incl. FL+AT)
COC papers
24 to telescopic landing gear brand make (Jost/SAF)
BPW axles
Axle 9to 22.5" large disk brake
Axle lift first axle automatic function, with starting aid
Air suspension unit each 9 tons load capacity
Axle spacing approx. 1310/1410 mm (for combined transport)
EBS brake system made by Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Air tank 80 liter ALU
optional: aluminum wheel 11,75x22,5 make ALCOA version: Dura Bright
Brand tires 385/65 R 22.5 of your choice WEB Trailer
Djmgkhj
15-pin socket
Reversing lights with LED technology
Lighting system Version all lights LED for multiple lights
Integrated ballast
Rear step area approx. 700 mm wide for increased operating safety,
Stainless steel drip tray in the middle, tread plate low above,
tread plate on the side outside
Climbing aid
Small stopcock positioned under the sump tray
ECE 70 marking plates
Empty hose pipes 2x 5m each, 2x 4m each with flap at the rear
Aluminum underride guard
GGVS sign 1 x foldable
Without fire extinguisher 6kg
Plastic document tube
Plastic mudguards, 180 degrees, above each axle
Tire pressure monitoring and flashing side marker lights
ADR certificate incl. FL+AT
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Working platform
WEB-TRAILERHARTHOLZBODEN-PLATEAU 3-ACHS
Call
Overall weight: 36,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,540 mm, Year of construction: 2024, Condition: new, total width: 2,540 mm, Equipment: ABS, WEB TRAILER PRSH 27 PLATEAU with hardwood floor
Dimensions:
Chassis width approx. 2480 mm
Chassis length approx. 13620 mm
Wheelbase approx. 7700 mm
Support winch position approx. 2300 from kingpin (2-axle tractors only)
Ride height .1280 mm with 1150 mm saddle height
Spring center approx. 1300 mm
Maximum fifth-wheel load approx. 12000 kg
Axle loads: 24 000 kg
Bwtzlj8Lty
Approval:
CoC papers
Chassis:
Chassis made of welded longitudinal beams and inserted cross beams
Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes
13 pairs of lashing eyes (brackets) screwed into the outer frame with groove, 5t each!!!
Support winches:
24 to telescopic support winch brand (Jost/SAF)
Axles
Brand make (SAF/BPW/JOST)
9to 22.5" large disk brake, total lift approx. 180 mm
without axle lift (option)
Axle spacing approx. 1310/1310 mm
Brake:
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Air reservoir 2 x approx. 80l
Tire pressure control
Lighting system: LED
15-pin connection at the front
flashing SML
Tires:
Brand tires 385/65 R 22.5 on steel wheels
Body:
Steel bulkhead approx. 1200 mm high, with sheet metal cladding, bolt-on design
Floor:
Weatherproof hardwood floor 28 mm alternating with galvanized omega steel profiles
Hardwood boards screwed to the cross beams (optional double screw connection)
Floor: Certificate for tested forklift axle load 9.0t in accordance with DIN EN 283
Add-on parts:
Premium rear lamp plate, large and edged
Welded-on underride guard (rectangular tube)
Access ladder at the rear right, foldable and extendable with platform
Two wheel chocks with bracket, plastic or galvanized
Plastic mudguards 180° above each axle
Side collision protection on both sides, aluminum or plastic profile
Coating:
Painting of the chassis in RAL 9005 or nova gray 7350
Other colors at an extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILERPRASQ Drehschemel Curtainsider / XL
Call
Overall weight: 18,000 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Year of construction: 2024, Condition: new, total width: 2,480 mm, total height: 4,000 mm, Equipment: ABS, WEB Trailer PRASQ18 SYS 7.5 trailer with body,
17.5" twin tires including plywood floor
Dimensions:
Length according to customer specification in 100 mm increments (optionally in 50 mm increments)
Curtainsider body Side height 2850 mm from loading area to
lower edge of outer rail (other heights optionally available)
Width 2480mm or 2540mm
Coupling height according to customer specification
Driving height / loading height unloaded approx. 1030mm (top edge of floor)
Spring center approx. 1100mm
Axle loads: 18 000kg (2 x 9000kg)
Approval:
COC papers
Chassis:
Chassis construction consisting of welded side members and inserted cross members
Cross member spacing IPE 80 approx. 400-500 mm
Outer frame height approx. 125 mm high (t=4), with groove and 7 pairs of lashing eyes 5t
Bogie with a 90 mm high ball rim (low maintenance)
Towing equipment:
Drawbar 18t rigid, height adjustment on one side
Drawbar eye ø 40 mm (50 mm eye optional)
Axles:
Brand make (SAF/BPW/JOST)
9to 17.5" drum brake
Brake:
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with two Knorr/Wabco rotary slide valves
Tire pressure control
Tires:
235/75 R 17.5 brand tires on steel wheel
Body:
Body certificate according to DIN EN 12642 XL
Contour markings, ECE plates, rear doors steel sandwich profiles with 4 internal espagnolette locks, sliding roof, 90° bulkhead, steel cassettes,
interior wear plate over full height
3 rows of wooden slats
Sliding tarpaulin PVC12x12,880gr,
Reinforced roof tarpaulin with 12x12 roof fabric
Rear and front tensioning ratchet
Lighting system:
24 volt with LED
Svafls
15 pole. plug
flashing SML
Floor:
Screen-printed floor 27mm crosswise laid
Certificate for tested forklift axle load 7.2t according to DIN EN 283 (9t optional)
Attachments:
Access ladder with platform at rear right
Plastic mudguards, 180 degrees
Antispray mud flap
One wheel chock with bracket
2 rubber bumpers at the rear corners
Side collision protection on both sides Aluminum or plastic profile
Coating:
Painting of the chassis in RAL 9005 or nova gray 7350
Other colors at an extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
Price ex works
Attention!!! Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILER3-Achs Curtainsider mit Aufbauzertifikat XL
Call
Overall weight: 35,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, PRSSQ 27 SYS Three-axle curtainsider with plywood transverse
Curtainsider superstructure Lateral height 2650 mm from loading area to
lower edge of outer spar
Chassis width approx. 2480 mm
Chassis length approx. 13620 mm
Chassis construction with inserted cross members
Unloaded ride height approx. 1250mm with 1130mm saddle height
COC
Chassis frame construction made of welded longitudinal beams and
and inserted cross members
Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes and lashing holes on the outside
13 pairs of lashing eyes (bracket 5t)
Free choice of manufacturer (SAF/BPW)
Axle 9to 22.5" large disk brake
EBS brake system make Knorr or Wabco
Tire pressure control
flashing SML
brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL valid with two rows of wooden slats
Contour markings, ECE plates
Rear portals with 4 internal espagnolette locks Door leaves
made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear
3 sets of side sliding panels
Front wall steel 400mm steel cassettes inside wear plate over full height
Lighting system 7-fold multifunction light Aspöck / Hella
Screen printing floor27mm screen printing floor laid crosswise
Reinforced roof tarpaulin with 12x12 roof fabric
KTL coating with zinc phosphating plus powder, maximum corrosion protection
corrosion protection
Opt. hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Br9Clkxv
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Timber transporter
WEB-TRAILERHTA 27 Anhänger für Langhölzer
Call
Overall weight: 36,000 kg, axe configuration: 3 axles, loading space length: 6,900 mm, Year of construction: 2024, Condition: new, Equipment: ABS, ----WEB Trailer
HTA 27 trailer for transporting 22.5" long logs
----
Unloaded ride height approx. 1350 mm
Axle loads: 30 000 kg (3 x 9000 kg)
Technical axle loads: 30000 kg
Chassis length approx. 6900 mm
Coupling height approx. 800 mm
Front solebar height approx. 130 mm
World chassis number and type plate from WEB Trailer
COC papers
1 x gripper slider welded on the right left
3 mm tear plate cover completely welded through between the longitudinal beams
Transfer gripper for chassis at the front of the head frame
Shear lugs for Exte beams welded onto OK solebars
Four welded ring elements for lashing on each side (diagonally on the bottom chord)
Lashing winches for securing loads for timber transportation
Bogie for timber transport trailer
Height adjustment device with 2x tension springs
Steering ring with double row of balls of your choice Syste al load max. 20 to
Drawbar extendable 6 x 100 mm without drawbar cover
Distance from center of drawbar eye to front edge of head frame approx. 1700 mm
Drawbar eye ø 50 mm
Bimlo72G3C8
Axle manufacturer: Brand make (SAF/BPW/JOST)
Axle 9t disc 22.5" twin tires
Safety cables for the air suspension
Axle lift on second axle with automatic axle lift control
Lifting and lowering device with 2 rotary slide valves
Axle spacing approx. 1810 mm
Air suspension unit with 12 tons load capacity each
Air tank 2 x approx. 80 l
Smartboard/TIM/Infocenter in addition to the lifting and lowering valves
1 red and 1 yellow coupling head
EBS brake system brand name Knorr or Wabco with RSS
Tires 275/70 R 22.5 brand of our choice on steel wheel
Cable harness protected underneath the upper belt
Lane departure warning lights (LED) 1 pair
Side marker lights mounted in the longitudinal member (or directly on the web plate)
15-pin plug at the front
24 volt lighting system with large LED multifunction light
Tire pressure monitoring
Flashing SML
Reversing lights 2x LED per side 1 behind 1st axle
License plate illumination
Reversing light in LED at the rear in the lamp plate
Protective plates for lighting and side marker lights on the side
Position light (LED) front white incl. reflector
Holder for snow chains on the left + right side
Underride guard brackets bolted to the longitudinal member
One wheel chock (plastic) with bracket
Underride guard (profiled) in bolted-on version
Warning sign, red/white hatched, 3000 mm extendable to the rear, with LED light and reversing cable
Plastic mudguards, 180 degrees, above each axle
Antispray mud flaps
Side collision protection Aluminium profiles, anodized
----
Optional:
Exte stanchion bench 144-S (incl. assembly and clamp fastening)
----
Coating/painting:
Painting of the chassis in RAL 9005 or nova grey 7350 other colors at an extra charge only if color is available in powder
KTL coating with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing optionally possible
Approval:
COC
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform open
WEB-TRAILER3-Achs Stahlmattenauflieger XL + LIGHT
Call
Overall weight: 36,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, Web trailer +++Steel mat transport XL LIGHT +++
Chassis PRSSQPl-27- 12t-neck with plywood 22.5" single
Dimensions
Fifth wheel load 12000kg
Dmnexh
Wheelbase 7480mm or 7700mm
Support winch position 2300mm
Front overhang 1660mm
Chassis length 13,620mm
Chassis width 2480mm
Unladen ride height approx. 1270 mm with fifth wheel height 1150 mm
Axle loads: 24 000 kg (3 x 8000 kg, technical: 3x 9000kg)
opt. Chassis suitable for mounting 1x40 foot standard container
opt. Chassis suitable for carrying 2x20 foot containers
opt. Pair of container locks with retractable pivot pins, embedded in the floor
Certification
COC papers
Chassis
IPE 80 cross member
Chassis frame construction consisting of welded longitudinal beams and
inserted cross members
Outer frame height approx. 125mm, t=4mm with outer slope and
lashing holes on the side and in sloping
King pin 2" according to SAE standard, interchangeable from below
Attachments FG (12)
Extension of the stanchion pockets to 2700mm between the inserted stanchions!
4 pairs of lashing eyes (heavy-duty) Thiele 5t Z100242 min. 90° outwards
Foldable welded into the A-frame
Steel mats: Storage option: Storage positions at the front of the head frame, also
for reinforcements
Steel mats: Slots option: 4x stanchion rows lengthwise (2x center, 2x 1
rear) for more precise staking positions
Steel mat XL note: stanchion length approx. 2000 mm
Steel mat XL certificate LIGHT
Extendable RuTa 81x51x5: 6x front
2x6 outside extendable
without rear rope
4x front strut + 2xhi PLUS Rg 70x40
Forklift collision protection as flat steel 3-sided (left+right+hi flat steel 35x10mm)
Support winches
24 to telescopic landing gear
Single-sided operation and half-round with base plate
Axles
Free choice of axle make by manufacturer (SAF/BPW/JOST)
Axle with large disc brake (430 or 4309)
Axle 9to 22.5" disc brake, single tires
Running gear
Axle lift first axle automatic function, with starting aid on PIN
Air suspension unit each 9 tons load capacity with bellows diameter min. approx. 300mm
Total lift approx. 180 mm (without height limit)
Axle distance approx. 1310/1310 mm
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Brake
1 red and 1 yellow coupling head
Tire pressure control basic version, connected to CAN bus system of EBS
with double release valve
Lifting and lowering device at the rear left in the direction of travel
Air tank 2 x approx. 80 l in steel, painted black
Brake
EBS brake system make Knorr or Wabco of our choice with RSS
Tire pressure control via EBS
Tires
Brand tires 385/65 R 22.5 of manufacturer's choice
Wheel mounting through center centering
Body
Dropside kit for plateaus, height. approx. 800 mm, 2x5 plus tailgate
Body certificate in accordance with DIN EN 12642 XL, steel mat transport
Body certificate according to DIN EN 12642 A, bulkhead up to 2500mm height, 16t
(free), 27t (belt), 32t (chain)
Rear dropside with 2 internal folding steps
Contour marking
ECE signs
Front wall approx. 2200 mm high, with sheet metal cladding, bolted version
Lighting system
Rotating beacon 400 mm extendable at the rear with socket
Lighting system 24 Volt LED
Reversing light 2x LED per side 1 piece near support bracket
License plate illumination,
Reversing light in LED technology,
Distribution box at the rear
Front position lights
Side marker lights (LED) flashing
Lane departure warning lights (LED)
15-pin plug or socket at the front
EBS socket
Floor
Screen printing plates at the front lengthwise between the longitu
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERCOS-27 Mitten-Heckschieber 20ft/40ft
Call
Overall weight: 44,000 kg, maximum load weight: 38,500 kg, axe configuration: 3 axles, Year of construction: 2024, Condition: new, Equipment: ABS, COS-27 center-rear slide container chassis for
Container with center and rear slide 20ft/40ft
For the reception of
1x20 foot containers flush to the rear,
1x40' high cube container in gooseneck design
2x20 foot containers
Ride height front unloaded approx. 1250 mm rear approx. 1130 mm (upper edge of solebar) with fifth wheel height 1120
Chassis length approx. 9331 mm (pushed in)
Technical axle loads: 27 000 kg (3 x 9000 kg)
Maximum fifth wheel load approx. 16000 kg
Container locks Jost or Schneider
King pin 2"
24 to telescopic support winch make (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9t with large disk brake
Axle lift first axle
Lifting and lowering device
Axle spacing approx. 1310/1410 mm
EBS brake system make Knorr or Wabco with RSS
Brand tires 385/55 R 22.5
Contour marking for container chassis
15-pin + 2x7-pin connection at the front
24 volt lighting system with 7 LED multifunction lights
flashing SML
Tire pressure control
Mechanical extension of center section via tractor unit
Pneumatic locking
Rear extension by means of operating lever through a pneumatic cylinder
Impact protection system consisting of flat steel 50x30mm rear horizontal on C-tube between the side plates corner plate 30mm on container lock
Two wheel chocks with holder, plastic or galvanized
Plastic mudguards 180°
Side collision protection on both sides, aluminum or plastic profile
Premium rear lamp plate, large and folded (anodized aluminium)
Welded-on underride guard (rectangular tube)
ECE marking plate
Front stop for container
Side collision protection on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL coating with zinc phosphating plus powder, maximum corrosion protection
corrosion protection
COC papers
Price ex works
B9Dichyddr
Attention!!!
Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform open
WEB-TRAILERHARTHOLZ-Tandem Baustoffanhänger
Call
Overall weight: 18,000 kg, axe configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2024, Condition: new, total width: 2,540 mm, Equipment: ABS, WEB-Trailer ZPRAH 18 Tandem building material trailer hardwood floor
Chassis length approx. 7200mm (6000- 8000 mm)
Chassis width approx. 2480mm
Axle loads: 18 000 g (2 x 9000 kg)
Coupling height approx. 400mm unloaded (center of towing eye)
Driving height unladen approx. 930mm
Front drawbar load approx. 1000kg
Spring center approx. 1100 mm
COC
Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes
7 pairs of lashing eyes (brackets) screwed into the outer frame with groove, 5t each!!!
1 set of rear drop supports, height-adjustable
1 set of front support winches, single-sided operation Rigid drawbar (center tube) with screwed-on drawbar eye ø 50 mm
Axles of manufacturer's choice (SAF/BPW/Jost)
2 axle 9to 17.5" drum brake, twin tires for air suspension
Lifting and lowering device with 1 rotary slide valve Knorr/Wabco air suspension unit 9 tons load capacity each Total lift approx. 180mm
Axle distance approx. 1310mm
Dual-circuit air brake system in accordance with EC Directive 71/320 Make of your choice
of choice Manufacturer
Coupling head red and yellow
EBS brake system make Knorr or Wabco of your choice Manufacturer with
RSS
Tire pressure control
flashing SML
Brand tires 235/75 R 17.5 on steel wheel make of your choice Manufacturer
Side wall in anodized design, height approx. 600mm 2x2
bulkhead approx. 600mm high, with sheet metal cladding, bolted on
Bwtzfbvvpd
Lighting system 24 LED
2 x 7-pole or 15-pole
Front position lights
Hardwood floor 28mm alternating with galvanized omega steel profiles
Access ladder at rear right
Underride guard (profiled) in bolted-on design
2 bumpers at the rear corners
Plastic mudguards, 180 degrees, above each axle
Antispray mud flaps 1 pair
Painting of the chassis in RAL
KTL coating with zinc phosphating plus powder, maximum corrosion protection
corrosion protection
or hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILER3-Achs Schiebeplane mit FLEXSTRAP
Call
Overall weight: 35,000 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, PRSSQ 27 SYS Three-axle curtainsider with plywood transverse
----FLEXSTRAP - The new system for load securing
video
----
Safety for the driver
No more throwing, no more climbing
Safe operation by ONE person
What is easy is also used!
Easy to move
Fast loading and unloading
Precise positioning
Also possible for round and difficult loads
Movement over high goods
High pallets, paper rolls, etc.
Sliding roof function remains fully intact
The system runs directly under the roof (approx. 60 mm)
Saves time
Less downtime, no lost belts
Quick amortization Curtainsider superstructure Lateral height 2650mm from loading area to lower edge of outer rail
Curtainsider body side height 2650mm from loading area to lower edge of outer rail
Length approx. 13620mm
Width approx. 2480mm
Unloaded ride height approx. 1250 mm with 1130 mm saddle height
COC papers
Chassis made of welded longitudinal beams and inserted cross beams
Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4 mm, with lashing holes on the outside
13 pairs of lashing eyes (brackets) screwed into the outer frame with groove !!! According to EU standard (tested lashing force 5t per lashing point)
24 to telescopic support winch brand (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22.5" disc brakes
without axle lift (option)
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL
Contour marking ECE plates
Door leaf with 4 internal espagnolette locks made of steel sandwich profiles
Sliding roof, automatic locking, can be opened from the rear
3 sets of side sliders
Front wall steel 400 mm steel cassettes inside wear plate
3 rows of wooden slats (optional aluminum)
Reinforced roof tarpaulin with 12x12 roof fabric
Rear tensioning ratchet, front only release device
Sliding tarpaulin of our choice, tarpaulin fabric PVC12x12,880gr
LED lighting system
15-pin
tire pressure control
flashing SML
Screen printing floor27mm screen printing floor laid crosswise in the neck area laid lengthwise
Screen-printed floor glued instead of screwed
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Premium rear lamp panel, large and edged
Welded-on underride guard (rectangular tube)
Bhilyqox
Access ladder at the rear right, foldable and extendable with platform
Two wheel chocks with bracket, plastic or galvanized
2 rubber bumpers at the rear corners
Plastic short mudguards (quarter) in front of and behind rigid axle unit
Side collision protection on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
----FLEXSTRAP 9x
----KTL coating with zinc phosphating plus powder, maximum corrosion protection
corrosion protection
Price ex works
Attention!!! Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERZWF/W 18 235/75 17,5 920 mm bis 1020mm
Call
Overall weight: 18,000 kg, maximum load weight: 14,500 kg, axe configuration: 2 axles, Year of construction: 2024, Condition: new, total height: 900 mm, Equipment: ABS, ZWF/W 18 235/75 17.5 Center tube center axle trailer
920 mm to approx. 1020 mm
Hbrjp89Lx
Chassis designed for swap bodies from 7150 to max. 7820 mm
(symmetrical bodies)Chassis designed for flush rear 7450 mm (with bumper) Front stop 7150-7450-7820 adjustable
Unloaded ride height approx. 900 mm (loaded approx. 25-30 mm lower)
Parking height approx. 920 mm to approx. 1020 mm
Spring center approx. 1100 mm
Drawbar, drawbar rigid Drawbar eye ø 50 mm
Coupling height approx. 400 mm
Axles
SAF or BPW 9to 17.5, drum brake
Twin tires for air suspension
Lifting and lowering device
Duomatic clutch
Reversible flex
1 x 15-pin plug
Tire pressure control
flashing SML
Brand tires 8 x 235/75 R 17.5 on steel wheel Make of your choice Manufacturer
Underride guard in special width approx. 2300mm
Painting of the chassis hot-dip galvanized
COC
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERWF/W-18 445/45 19,5 Wechselanhänger 1020/1320
Call
Overall weight: 18,000 kg, axe configuration: 2 axles, Year of construction: 2023, Condition: new, total height: 1,050 mm, Equipment: ABS, WF/W-18 445/45 19.5 Turntable swap body trailer, for
swap bodies 7.15 to 7.45
Chassis designed for swap bodies from 7150 to max. 7450 mm
Chassis designed for flush rear 7150 mm (with bumper)
CoC papers
Parking height approx. 1020 mm to max. 1320 mm
Underride height approx. 1000 mm on level ground
Axle loads: 18 000 kg (2 x 9000 kg)
Unloaded ride height approx. 1050 mm
Coupling height (center) approx. 800 mm unloaded
Height adjustment device with 1x tension springs
Drawbar extendable 600 mm continuously adjustable
Drawbar eye ø 40 mm
Branded axles (SAF/BPW)
Axle 9to 19.5" disc brake,
Air suspension unit 9 tons load capacity each Total lift approx. 400 mm
Coupling head red and yellow
EBS brake system make Knorr or Wabco
Tire pressure control
Brand tires 445/45 R 19.5
15-pin plug at the front
flashing SML
Centering guide rollers (small) steel, 1 pair each in the middle and rear (removable)
Plastic mudguards, 180 degrees
Antispray mud flaps
Rear lamp plate, continuous
Welded-on underride guard (rectangular tube)
1x wheel chock with bracket, plastic or galvanized
2 rear rubber bumpers
Tire pressure control
Flashing SML
Painting of the chassis in RAL 9005 or nova grey 7350 other colors at extra charge (only if color is available in powder)
Hot-dip galvanizing
Price ex works
Attention!!!
Pictures may show special equipment
Bsbyf7L8
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform open
WEB-TRAILERPRSSQPL 27 Baustoff mit TRIDEC-Lenkung
Call
Overall weight: 39,000 kg, maximum load weight: 32,480 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2024, Condition: new, total width: 2,480 mm, total height: 800 mm, Equipment: ABS, PRSSQPLTri 27 -13.6, 3-axle semi-trailer chassis with 27 mm
Transverse screen-printed floor Tires: 385/65 R 22.5"
Mechanical steering system with 1 drawbar for steering one axle
Make: Tridec
Maximum steering angle 28
Maximum fifth wheel load approx. 12000 kg
Support winch position approx. 2300 from kingpin
Chassis length approx. 13620 mm
Chassis width approx. 2480 mm
Permissible axle load: 24000 kg (technical axle load: 27000 kg)
Ride height: unladen approx. 1300 mm with fifth wheel height 1150 mm
COC papers
Chassis made of welded side members and inserted cross members
Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4 mm
13 pairs of lashing eyes (brackets) screwed into the outer frame with groove !!! According to EU standard (tested lashing force 5t per lashing point)
24 to telescopic support winch brand (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22,5 "large disk brake
Axle lift first axle, automatic function, with starting aid
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Tire pressure control
Lighting system 24 Volt LED
15-pin plug at the front
flashing SML
Brand tires 385/65 R 22.5
Body
Dropside in anodized design, height approx. 800 mm 2x4
Rear dropside with recessed folding step
Dropside in reinforced design Tie-rod dropside
Front wall approx. 1200 mm high, with sheet metal cladding, bolted on
version
Optional: body certificate DIN EN 12642 XL
Contour marking for platform trailers
Screen-printed floor laid crosswise 27mm
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Premium rear lamp panel, large and edged
Welded-on underride guard (rectangular tube)
Two wheel chocks with bracket, plastic or galvanized
Plastic mudguards
Side bumpers on both sides, aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if color is available in powder)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
COC papers
Price ex works
Bwtzx0Px7C
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Interchangeable chassis
WEB-TRAILERWechselanhänger 385/65 22,5 // 1220-1320
Call
Overall weight: 18,000 kg, axe configuration: 2 axles, Year of construction: 2023, Condition: new, Equipment: ABS, WEB-Trailer WF/W-18 385/65 22.5 Turntable swap body trailer, for
swap bodies C7.15 to C7.45
Dimensions:
Chassis designed for swap bodies from 7150 to max. 7450 mm
(symmetrical bodies)
Chassis flush with rear for swap bodies Total length 7150 mm
Attention: body length max. 7450 permissible)
2 outriggers and with 4 retractable pivot locks, 20"
Arrangement for mounting swap bodies
Spring center approx. 1300 mm
Parking height approx. 1220 to 1320 mm
Bstumo70
Underride height approx. 1200 mm on level ground
Axle loads: 18 000 kg (2 x 9000 kg)
Driving position approx. 1240 mm (unloaded)
Front stop, foldable and adjustable for 7150 + 7450 mm
Symmetrical swap bodies
Approval:
CoC papers
Towing device:
Coupling height (center) approx. 850 mm unloaded
Towing fork 18t
Distance from center of drawbar eye to front edge of 7450 swap body approx. 1800 mm
40 mm towing eye
Axles:
Brand make (SAF/BPW/JOST)
9to 22.5" with large disc brake
Air suspension unit each 9 tons load capacity with bellows diameter approx. 300mm
Total lift approx. 180 mm (without height limit)
Brake:
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 2 Knorr/Wabco rotary slide valves
Control unit lifting+lowering in driving direction left
Tire pressure control
Tires:
Brand tires 385/65 R 22.5
Lighting system:
LED lighting system
15-pin connection at the front
flashing SML
Attachments:
Wheel chock with bracket
Steel centering guide rollers (small), 1 pair each in the middle and at the rear
2 rubber bumpers at the rear corners
Plastic mudguards, mudguard holder in reinforced design
Antispray mud flaps
Coating bogie and chassis:
Hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform open
WEB-TRAILERPRSSQPI-27 Baustoff-Sattelauflieger
Call
Overall weight: 36,000 kg, maximum load weight: 28,900 kg, axe configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2024, Condition: new, total width: 2,480 mm, total height: 800 mm, Equipment: ABS, WEB Trailer PRSSQPI-27-13.6 Three-axle chassis 12t-neck with
plywood, crosswise mounted Tires: 385/65 R 22.5"
Bwtz929Pz7
Maximum fifth wheel load approx. 12000 kg
Support winch position approx. 2300 from kingpin
Chassis length approx. 13620 mm
Chassis width approx. 2480 mm
Permissible axle load: 24000 kg (technical axle load: 27000 kg)
Ride height: unladen approx. 1270 mm with fifth wheel height 1150 mm
Chassis made of welded longitudinal beams and inserted cross beams Outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness approx. 4 mm
13 pairs of lashing eyes (brackets) screwed into the outer frame 4 mm with groove !!! According to EU standard (tested lashing force 5 t per lashing point)
24 to telescopic support winch brand (Jost/SAF)
Axles Brand name (SAF/BPW/JOST)
Axle 9to 22.5" disc brake
without axle lift (option)
EBS brake system make Knorr or Wabco
Air connections coupling head red and yellow
Lifting and lowering device with 1 Knorr/Wabco rotary slide valve
Brand tires 385/65 R 22.5
Lighting system 24 Volt LED
15-pin plug
Tire pressure control
flashing SML
Body
Side wall in anodized design, height approx. 800 mm 2x4
Rear dropside with folding step on the inside
Front wall approx. 1200 mm high, with sheet metal cladding, bolted on
version
Contour marking for platform vehicles
Screen-printed floor, crosswise laid 27 mm
Floor: Certificate for tested forklift axle load 9.0t according to DIN EN 283
Plastic mudguards, 180 degrees, above each axle
Antispray mud flaps
Side collision protection on both sides Aluminum or plastic profile
Chassis painted in RAL 9005 or nova grey 7350 other colors at an extra charge (only if powder paint is available)
KTL with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing (optional)
COC papers
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a cost-free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!!!
View details
Listing
Twist
7,591 km
Platform/tarpaulin
WEB-TRAILER1-Achs-City-Sattelauflieger TRI LBW
Call
Overall weight: 22,000 kg, axe configuration: 1 axle, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, PRSSQTri 09-SYS with body, 1-axle, LBW
Twin tires 22.5 TRIDEC
----
Curtainsider body Lateral height 2600 mm from loading area to
lower edge of outer beam
Maximum steering angle 31°
Mechanical steering system with 1 drawbar for steering one axle
Bwtzrshbyn
Make: Tridec
Chassis width approx. 2480 mm
Maximum fifth wheel load approx. 12000 kg
Support winch position approx. 2300 from kingpin
Chassis length approx. 13620 mm
Axle loads: 10 000 kg
Unladen ride height approx. 1300 mm with fifth wheel height 1150 mm
Approval with COC papers
?outer frame height approx. 125 mm, with groove for lashing eyes, basic thickness
approx. 4 mm, with lashing holes on the outside
13 pairs of lashing eyes in the outer frame
(tested lashing force 5t per lashing point)
24 to telescopic support winch
Axle
Free choice of axle make by WEB Trailers (SAF/BPW/Jost)
Axle with large disc brake
Axle 10t disc 22.5" twin tires
Air suspension unit per 10 t
Lifting and lowering device
Coupling head red and yellow
Lifting and lowering device mounted at the rear right in the direction of travel
Air tank 2 x approx. 80 l in steel, painted black
EBS brake system made by Knorr or Wabco incl. RSS
4 brand tires 275/70 R 22.5 brand on steel wheel (brand of your choice WEB Trailer)
Tire pressure control
Tail lift
Platform with roll-off protection
Steel platform - tear plate
Front plug connection for LBW as Rema socket (without batteries! optional)
Tail lift of our choice 2.5t
Documentation, manual etc.
Operation via control in the box at the rear right and remote control
with helical flex cable in the superstructure top right
Platform height approx. 2000mm (standard rear lockable)
Blinker lights on the tail lift platform
Fuse and reverse polarity protection on positive and negative cable (red+blue)
Make of tail lift of your choice WEB Trailer
Body certificate in accordance with DIN EN 12642 XL (for 27t payload + tail lift) with at least 2 rows of wooden insert slats and locking at the top of the platform
Contour marking on tarpaulins and rear portal
ECE signs on tail lift
Rear upper position lights in red (LED)
Rear sliding roof fixed
Top flap for tail lift with gas pressure damper
Position lights at the front top and bottom in white with reflex (LED)
3 sets of side sliders Manufacturer's choice WEB
Standard steel bulkhead with 400 mm steel cassettes
Interior wear plate approx./max. 2.40m
3 rows of wooden slats
24 volt lighting system with small multifunction light
15-pin plug
flashing SML
Reinforced roof tarpaulin with 12x12 roof fabric
Tensioning ratchet at the rear, only release device at the front
2 steel bumpers at the rear corners
Plastic mudguards, 180 degrees
Antispray mud flaps
Side collision protection on both sides, steel profile or plastic
Body certificate in accordance with DIN EN 12642 XL
Coating/painting:
Painting of the chassis in RAL 9005 or Novagrau 7350 other colors at an extra charge only if color is available in powder
KTL coating with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanizing optionally possible
Approval:
COC
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and prepare a free and non-binding offer. Leasing, financing or installment plan possible! We can respond to your wishes! Ask us - we will be happy to make you an offer.
Subject to errors and prior sale!
View details
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
This may be of interest to you
Find out now
+49 201 858 95 507
+49 201 858 95 507